user/sven/linux.git/include/net/route.h, branch v4.9.296

ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu

2018-05-30T05:50:36Z

[ Upstream commit d52e5a7e7ca49457dd31fc8b42fb7c0d58a31221 ] Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: ipv4: Remove l3mdev_get_saddr

2016-09-11T06:12:53Z

No longer needed Signed-off-by: David Ahern Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-04-23T22:51:33Z

Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller

net: vrf: Fix dst reference counting

2016-04-11T19:56:20Z

Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern Signed-off-by: David S. Miller

net: Checks skb_dst to be NULL in inet_iif

2016-04-07T20:53:14Z

In inet_iif check if skb_rtable is NULL for the skb and return skb->skb_iif if it is. This change allows inet_iif to be called before the dst information has been set in the skb (e.g. when doing socket based UDP GRO). Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

ipv4: Namespaceify ip_default_ttl sysctl knob

2016-02-17T01:42:54Z

Signed-off-by: Nikolay Borisov Signed-off-by: David S. Miller

net: Propagate lookup failure in l3mdev_get_saddr to caller

2016-01-05T03:58:30Z

Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern Signed-off-by: David S. Miller

net: Add source address lookup op for VRF

2015-10-07T11:27:44Z

Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by: David Ahern Signed-off-by: David S. Miller

net: Rename FLOWI_FLAG_VRFSRC to FLOWI_FLAG_L3MDEV_SRC

2015-10-07T11:27:42Z

Signed-off-by: David Ahern Signed-off-by: David S. Miller

ipv4: ICMP packet inspection for multipath

2015-10-05T10:00:04Z

ICMP packets are inspected to let them route together with the flow they belong to, minimizing the chance that a problematic path will affect flows on other paths, and so that anycast environments can work with ECMP. Signed-off-by: Peter Nørlund Signed-off-by: David S. Miller