user/sven/linux.git/include/net/tc_act, branch v5.10

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-10-15T19:43:21Z

Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski

net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info

2020-10-15T16:10:11Z

The access of tcf_tunnel_info() produces the following splat, so fix it by dereferencing the tcf_tunnel_key_params pointer with marker that internal tcfa_liock is held. ============================= WARNING: suspicious RCU usage 5.9.0+ #1 Not tainted ----------------------------- include/net/tc_act/tc_tunnel_key.h:59 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by tc/34839: #0: ffff88828572c2a0 (&p->tcfa_lock){+...}-{2:2}, at: tc_setup_flow_action+0xb3/0x48b5 stack backtrace: CPU: 1 PID: 34839 Comm: tc Not tainted 5.9.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x9a/0xd0 tc_setup_flow_action+0x14cb/0x48b5 fl_hw_replace_filter+0x347/0x690 [cls_flower] fl_change+0x2bad/0x4875 [cls_flower] tc_new_tfilter+0xf6f/0x1ba0 rtnetlink_rcv_msg+0x5f2/0x870 netlink_rcv_skb+0x124/0x350 netlink_unicast+0x433/0x700 netlink_sendmsg+0x6f1/0xbd0 sock_sendmsg+0xb0/0xe0 ____sys_sendmsg+0x4fa/0x6d0 ___sys_sendmsg+0x12e/0x1b0 __sys_sendmsg+0xa4/0x120 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f1f8cd4fe57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffdc1e193b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f8cd4fe57 RDX: 0000000000000000 RSI: 00007ffdc1e19420 RDI: 0000000000000003 RBP: 000000005f85aafa R08: 0000000000000001 R09: 00007ffdc1e1936c R10: 000000000040522d R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffdc1e1d6f0 R15: 0000000000482420 Fixes: 3ebaf6da0716 ("net: sched: Do not assume RTNL is held in tunnel key action helpers") Fixes: 7a47281439ba ("net: sched: lock action when translating it to flow_action infra") Signed-off-by: Leon Romanovsky Acked-by: Cong Wang Signed-off-by: Jakub Kicinski

net/sched: act_vlan: Add {POP,PUSH}_ETH actions

2020-10-04T00:28:45Z

Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to respectively pop and push a base Ethernet header at the beginning of a frame. POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any, must be stripped before calling POP_ETH. PUSH_ETH is restricted to skbs with no mac_header, and only the MAC addresses can be configured. The Ethertype is automatically set from skb->protocol. These restrictions ensure that all skb's fields remain consistent, so that this action can't confuse other part of the networking stack (like GSO). Since openvswitch already had these actions, consolidate the code in skbuff.c (like for vlan and mpls push/pop). Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller

net:qos: police action offloading parameter 'burst' change to the original value

2020-06-30T00:33:42Z

Since 'tcfp_burst' with TICK factor, driver side always need to recover it to the original value, this patch moves the generic calculation and recover to the 'burst' original value before offloading to device driver. Signed-off-by: Po Liu Acked-by: Vladimir Oltean Signed-off-by: David S. Miller

net: qos: add tc police offloading action with max frame size limit

2020-06-25T05:04:26Z

Current police offloading support the 'burst'' and 'rate_bytes_ps'. Some hardware own the capability to limit the frame size. If the frame size larger than the setting, the frame would be dropped. For the police action itself already accept the 'mtu' parameter in tc command. But not extend to tc flower offloading. So extend 'mtu' to tc flower offloading. Signed-off-by: Po Liu Signed-off-by: David S. Miller

net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline

2020-06-16T01:06:52Z

Currently, tcf_ct_flow_table_restore_skb is exported by act_ct module, therefore modules using it will have hard-dependency on act_ct and will require loading it all the time. This can lead to an unnecessary overhead on systems that do not use hardware connection tracking action (ct_metadata action) in the first place. To relax the hard-dependency between the modules, we unexport this function and make it a static inline one. Fixes: 30b0cf90c6dd ("net/sched: act_ct: Support restoring conntrack info on skbs") Signed-off-by: Alaa Hleihel Reviewed-by: Roi Dayan Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller

net: schedule: add action gate offloading

2020-05-01T23:08:19Z

Add the gate action to the flow action entry. Add the gate parameters to the tc_setup_flow_action() queueing to the entries of flow_action_entry array provide to the driver. Signed-off-by: Po Liu Signed-off-by: David S. Miller

net: qos: introduce a gate control flow action

2020-05-01T23:08:19Z

Introduce a ingress frame gate control flow action. Tc gate action does the work like this: Assume there is a gate allow specified ingress frames can be passed at specific time slot, and be dropped at specific time slot. Tc filter chooses the ingress frames, and tc gate action would specify what slot does these frames can be passed to device and what time slot would be dropped. Tc gate action would provide an entry list to tell how much time gate keep open and how much time gate keep state close. Gate action also assign a start time to tell when the entry list start. Then driver would repeat the gate entry list cyclically. For the software simulation, gate action requires the user assign a time clock type. Below is the setting example in user space. Tc filter a stream source ip address is 192.168.0.20 and gate action own two time slots. One is last 200ms gate open let frame pass another is last 100ms gate close let frames dropped. When the ingress frames have reach total frames over 8000000 bytes, the excessive frames will be dropped in that 200000000ns time slot. > tc qdisc add dev eth0 ingress > tc filter add dev eth0 parent ffff: protocol ip \ flower src_ip 192.168.0.20 \ action gate index 2 clockid CLOCK_TAI \ sched-entry open 200000000 -1 8000000 \ sched-entry close 100000000 -1 -1 > tc chain del dev eth0 ingress chain 0 "sched-entry" follow the name taprio style. Gate state is "open"/"close". Follow with period nanosecond. Then next item is internal priority value means which ingress queue should put. "-1" means wildcard. The last value optional specifies the maximum number of MSDU octets that are permitted to pass the gate during the specified time interval. Base-time is not set will be 0 as default, as result start time would be ((N + 1) * cycletime) which is the minimal of future time. Below example shows filtering a stream with destination mac address is 10:00:80:00:00:00 and ip type is ICMP, follow the action gate. The gate action would run with one close time slot which means always keep close. The time cycle is total 200000000ns. The base-time would calculate by: 1357000000000 + (N + 1) * cycletime When the total value is the future time, it will be the start time. The cycletime here would be 200000000ns for this case. > tc filter add dev eth0 parent ffff: protocol ip \ flower skip_hw ip_proto icmp dst_mac 10:00:80:00:00:00 \ action gate index 12 base-time 1357000000000 \ sched-entry close 200000000 -1 -1 \ clockid CLOCK_TAI Signed-off-by: Po Liu Signed-off-by: David S. Miller

net: tc_skbedit: Make the skbedit priority offloadable

2020-03-20T04:09:19Z

The skbedit action "priority" is used for adjusting SKB priority. Allow drivers to offload the action by introducing two new skbedit getters and a new flow action, and initializing appropriately in tc_setup_flow_action(). Signed-off-by: Petr Machata Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

net: tc_skbedit: Factor a helper out of is_tcf_skbedit_{mark, ptype}()

2020-03-20T04:09:19Z

The two functions is_tcf_skbedit_mark() and is_tcf_skbedit_ptype() have a very similar structure. A follow-up patch will add one more such function. Instead of more cut'n'pasting, extract a helper function that checks whether a TC action is an skbedit with the required flag. Convert the two existing functions into thin wrappers around the helper. Signed-off-by: Petr Machata Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller