user/sven/linux.git/include/net, branch v3.18.40

net_sched: update hierarchical backlog too

2016-07-12T12:48:11Z

[ Upstream commit 2ccccf5fb43ff62b2b96cc58d95fc0b3596516e4 ] When the bottom qdisc decides to, for example, drop some packet, it calls qdisc_tree_decrease_qlen() to update the queue length for all its ancestors, we need to update the backlog too to keep the stats on root qdisc accurate. Cc: Jamal Hadi Salim Acked-by: Jamal Hadi Salim Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net_sched: introduce qdisc_replace() helper

2016-07-12T12:48:10Z

[ Upstream commit 86a7996cc8a078793670d82ed97d5a99bb4e8496 ] Remove nearly duplicated code and prepare for the following patch. Cc: Jamal Hadi Salim Acked-by: Jamal Hadi Salim Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

cfg80211/wext: fix message ordering

2016-03-21T02:13:50Z

[ Upstream commit cb150b9d23be6ee7f3a0fff29784f1c5b5ac514d ] Since cfg80211 frequently takes actions from its netdev notifier call, wireless extensions messages could still be ordered badly since the wext netdev notifier, since wext is built into the kernel, runs before the cfg80211 netdev notifier. For example, the following can happen: 5: wlan1: mtu 1500 qdisc mq state DOWN group default link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff 5: wlan1: link/ether when setting the interface down causes the wext message. To also fix this, export the wireless_nlevent_flush() function and also call it from the cfg80211 notifier. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

ipv6: update skb->csum when CE mark is propagated

2016-02-15T20:42:44Z

[ Upstream commit 34ae6a1aa0540f0f781dd265366036355fdc8930 ] When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by: Eric Dumazet Acked-by: Herbert Xu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: fix test which detect duplicate vxlan iface

2016-02-15T20:42:43Z

[ Upstream commit 07b9b37c227cb8d88d478b4a9c5634fee514ede1 ] When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a9159dde, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 vxlan11 DOWN 7a:cb:b9:38:59:0d Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a9159dde ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by: Thomas Faivre Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

mac802154: fix typo IEEE802515 to IEEE802154

2016-02-10T03:57:31Z

[ Upstream commit 57205c14ca9147c1907556f77998cf82624d9fd6 ] This patch fixs a typo in address filter defines from IEEE802515 to IEEE802154. Signed-off-by: Alexander Aring Cc: Alan Ott Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

unix: avoid use-after-free in ep_remove_wait_queue

2016-01-16T00:20:41Z

[ Upstream commit 7d267278a9ece963d77eefec61630223fce08c6c ] Rainer Weikusat writes: An AF_UNIX datagram socket being the client in an n:1 association with some server socket is only allowed to send messages to the server if the receive queue of this socket contains at most sk_max_ack_backlog datagrams. This implies that prospective writers might be forced to go to sleep despite none of the message presently enqueued on the server receive queue were sent by them. In order to ensure that these will be woken up once space becomes again available, the present unix_dgram_poll routine does a second sock_poll_wait call with the peer_wait wait queue of the server socket as queue argument (unix_dgram_recvmsg does a wake up on this queue after a datagram was received). This is inherently problematic because the server socket is only guaranteed to remain alive for as long as the client still holds a reference to it. In case the connection is dissolved via connect or by the dead peer detection logic in unix_dgram_sendmsg, the server socket may be freed despite "the polling mechanism" (in particular, epoll) still has a pointer to the corresponding peer_wait queue. There's no way to forcibly deregister a wait queue with epoll. Based on an idea by Jason Baron, the patch below changes the code such that a wait_queue_t belonging to the client socket is enqueued on the peer_wait queue of the server whenever the peer receive queue full condition is detected by either a sendmsg or a poll. A wake up on the peer queue is then relayed to the ordinary wait queue of the client socket via wake function. The connection to the peer wait queue is again dissolved if either a wake up is about to be relayed or the client socket reconnects or a dead peer is detected or the client socket is itself closed. This enables removing the second sock_poll_wait from unix_dgram_poll, thus avoiding the use-after-free, while still ensuring that no blocked writer sleeps forever. Signed-off-by: Rainer Weikusat Fixes: ec0d215f9420 ("af_unix: fix 'poll for write'/connected DGRAM sockets") Reviewed-by: Jason Baron Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: fix IP early demux races

2016-01-15T23:41:51Z

[ Upstream commit 5037e9ef9454917b047f9f3a19b4dd179fbf7cd4 ] David Wilder reported crashes caused by dst reuse. I am seeing a crash on a distro V4.2.3 kernel caused by a double release of a dst_entry. In ipv4_dst_destroy() the call to list_empty() finds a poisoned next pointer, indicating the dst_entry has already been removed from the list and freed. The crash occurs 18 to 24 hours into a run of a network stress exerciser. Thanks to his detailed report and analysis, we were able to understand the core issue. IP early demux can associate a dst to skb, after a lookup in TCP/UDP sockets. When socket cache is not properly set, we want to store into sk->sk_dst_cache the dst for future IP early demux lookups, by acquiring a stable refcount on the dst. Problem is this acquisition is simply using an atomic_inc(), which works well, unless the dst was queued for destruction from dst_release() noticing dst refcount went to zero, if DST_NOCACHE was set on dst. We need to make sure current refcount is not zero before incrementing it, or risk double free as David reported. This patch, being a stable candidate, adds two new helpers, and use them only from IP early demux problematic paths. It might be possible to merge in net-next skb_dst_force() and skb_dst_force_safe(), but I prefer having the smallest patch for stable kernels : Maybe some skb_dst_force() callers do not expect skb->dst can suddenly be cleared. Can probably be backported back to linux-3.6 kernels Reported-by: David J. Wilder Tested-by: David J. Wilder Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: add validation for the socket syscall protocol argument

2016-01-15T23:41:51Z

[ Upstream commit 79462ad02e861803b3840cc782248c7359451cd9 ] 郭永刚 reported that one could simply crash the kernel as root by using a simple program: int socket_fd; struct sockaddr_in addr; addr.sin_port = 0; addr.sin_addr.s_addr = INADDR_ANY; addr.sin_family = 10; socket_fd = socket(10,3,0x40000000); connect(socket_fd , &addr,16); AF_INET, AF_INET6 sockets actually only support 8-bit protocol identifiers. inet_sock's skc_protocol field thus is sized accordingly, thus larger protocol identifiers simply cut off the higher bits and store a zero in the protocol fields. This could lead to e.g. NULL function pointer because as a result of the cut off inet_num is zero and we call down to inet_autobind, which is NULL for raw sockets. kernel: Call Trace: kernel: [] ? inet_autobind+0x2e/0x70 kernel: [] inet_dgram_connect+0x54/0x80 kernel: [] SYSC_connect+0xd9/0x110 kernel: [] ? ptrace_notify+0x5b/0x80 kernel: [] ? syscall_trace_enter_phase2+0x108/0x200 kernel: [] SyS_connect+0xe/0x10 kernel: [] tracesys_phase2+0x84/0x89 I found no particular commit which introduced this problem. CVE: CVE-2015-8543 Cc: Cong Wang Reported-by: 郭永刚 Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

sctp: update the netstamp_needed counter when copying sockets

2016-01-15T23:41:50Z

[ Upstream commit 01ce63c90170283a9855d1db4fe81934dddce648 ] Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy related to disabling sock timestamp. When SCTP accepts an association or peel one off, it copies sock flags but forgot to call net_enable_timestamp() if a packet timestamping flag was copied, leading to extra calls to net_disable_timestamp() whenever such clones were closed. The fix is to call net_enable_timestamp() whenever we copy a sock with that flag on, like tcp does. Reported-by: Dmitry Vyukov Signed-off-by: Marcelo Ricardo Leitner Acked-by: Vlad Yasevich Signed-off-by: David S. Miller Signed-off-by: Sasha Levin