user/sven/linux.git/include/net, branch v4.10.3

lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled

2017-02-08T17:52:11Z

An error was reported upgrading to 4.9.8: root@Typhoon:~# ip route add default table 210 nexthop dev eth0 via 10.68.64.1 weight 1 nexthop dev eth0 via 10.68.64.2 weight 1 RTNETLINK answers: Operation not supported The problem occurs when CONFIG_LWTUNNEL is not enabled and a multipath route is submitted. The point of lwtunnel_valid_encap_type_attr is catch modules that need to be loaded before any references are taken with rntl held. With CONFIG_LWTUNNEL disabled, there will be no modules to load so the lwtunnel_valid_encap_type_attr stub should just return 0. Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules") Reported-by: pupilla@libero.it Signed-off-by: David Ahern Signed-off-by: David S. Miller

udp: properly cope with csum errors

2017-02-07T16:19:00Z

Dmitry reported that UDP sockets being destroyed would trigger the WARN_ON(atomic_read(&sk->sk_rmem_alloc)); in inet_sock_destruct() It turns out we do not properly destroy skb(s) that have wrong UDP checksum. Thanks again to syzkaller team. Fixes : 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue") Reported-by: Dmitry Vyukov Signed-off-by: Eric Dumazet Cc: Paolo Abeni Cc: Hannes Frederic Sowa Acked-by: Paolo Abeni Signed-off-by: David S. Miller

netlabel: out of bound access in cipso_v4_validate()

2017-02-05T00:44:22Z

syzkaller found another out of bound access in ip_options_compile(), or more exactly in cipso_v4_validate() Fixes: 20e2a8648596 ("cipso: handle CIPSO options correctly when NetLabel is disabled") Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine") Signed-off-by: Eric Dumazet Reported-by: Dmitry Vyukov Cc: Paul Moore Acked-by: Paul Moore Signed-off-by: David S. Miller

ipv6: fix flow labels when the traffic class is non-0

2017-01-31T18:16:59Z

ip6_make_flowlabel() determines the flow label for IPv6 packets. It's supposed to be passed a flow label, which it returns as is if non-0 and in some other cases, otherwise it calculates a new value. The problem is callers often pass a flowi6.flowlabel, which may also contain traffic class bits. If the traffic class is non-0 ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and returns the whole thing. Thus it can return a 'flow label' longer than 20b and the low 20b of that is typically 0 resulting in packets with 0 label. Moreover, different packets of a flow may be labeled differently. For a TCP flow with ECN non-payload and payload packets get different labels as exemplified by this pair of consecutive packets: (pure ACK) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49 Payload Length: 32 Next Header: TCP (6) (payload) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000 Payload Length: 688 Next Header: TCP (6) This patch allows ip6_make_flowlabel() to be passed more than just a flow label and has it extract the part it really wants. This was simpler than modifying the callers. With this patch packets like the above become Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 32 Next Header: TCP (6) Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2:: 0110 .... = Version: 6 .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0)) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2) .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e Payload Length: 688 Next Header: TCP (6) Signed-off-by: Dimitris Michailidis Acked-by: Eric Dumazet Signed-off-by: David S. Miller

tcp: don't annotate mark on control socket from tcp_v6_send_response()

2017-01-27T15:33:56Z

Unlike ipv4, this control socket is shared by all cpus so we cannot use it as scratchpad area to annotate the mark that we pass to ip6_xmit(). Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket family caches the flowi6 structure in the sctp_transport structure, so we cannot use to carry the mark unless we later on reset it back, which I discarded since it looks ugly to me. Fixes: bf99b4ded5f8 ("tcp: fix mark propagation with fwmark_reflect enabled") Suggested-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

2017-01-26T17:54:50Z

Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains a large batch with Netfilter fixes for your net tree, they are: 1) Two patches to solve conntrack garbage collector cpu hogging, one to remove GC_MAX_EVICTS and another to look at the ratio (scanned entries vs. evicted entries) to make a decision on whether to reduce or not the scanning interval. From Florian Westphal. 2) Two patches to fix incorrect set element counting if NLM_F_EXCL is is not set. Moreover, don't decrenent set->nelems from abort patch if -ENFILE which leaks a spare slot in the set. This includes a patch to deconstify the set walk callback to update set->ndeact. 3) Two fixes for the fwmark_reflect sysctl feature: Propagate mark to reply packets both from nf_reject and local stack, from Pau Espin Pedrol. 4) Fix incorrect handling of loopback traffic in rpfilter and nf_tables fib expression, from Liping Zhang. 5) Fix oops on stateful objects netlink dump, when no filter is specified. Also from Liping Zhang. 6) Fix a build error if proc is not available in ipt_CLUSTERIP, related to fix that was applied in the previous batch for net. From Arnd Bergmann. 7) Fix lack of string validation in table, chain, set and stateful object names in nf_tables, from Liping Zhang. Moreover, restrict maximum log prefix length to 127 bytes, otherwise explicitly bail out. 8) Two patches to fix spelling and typos in nf_tables uapi header file and Kconfig, patches from Alexander Alemayhu and William Breathitt Gray. ==================== Signed-off-by: David S. Miller

net: Specify the owning module for lwtunnel ops

2017-01-24T21:21:36Z

Modules implementing lwtunnel ops should not be allowed to unload while there is state alive using those ops, so specify the owning module for all lwtunnel ops. Signed-off-by: Robert Shearman Signed-off-by: David S. Miller

netfilter: nf_tables: deconstify walk callback function

2017-01-24T20:46:58Z

The flush operation needs to modify set and element objects, so let's deconstify this. Signed-off-by: Pablo Neira Ayuso

lwtunnel: fix autoload of lwt modules

2017-01-18T22:07:14Z

Trying to add an mpls encap route when the MPLS modules are not loaded hangs. For example: CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m CONFIG_MPLS_ROUTING=m CONFIG_MPLS_IPTUNNEL=m $ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 The ip command hangs: root 880 826 0 21:25 pts/0 00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 $ cat /proc/880/stack [] call_usermodehelper_exec+0xd6/0x134 [] __request_module+0x27b/0x30a [] lwtunnel_build_state+0xe4/0x178 [] fib_create_info+0x47f/0xdd4 [] fib_table_insert+0x90/0x41f [] inet_rtm_newroute+0x4b/0x52 ... modprobe is trying to load rtnl-lwt-MPLS: root 881 5 0 21:25 ? 00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS and it hangs after loading mpls_router: $ cat /proc/881/stack [] rtnl_lock+0x12/0x14 [] register_netdevice_notifier+0x16/0x179 [] mpls_init+0x25/0x1000 [mpls_router] [] do_one_initcall+0x8e/0x13f [] do_init_module+0x5a/0x1e5 [] load_module+0x13bd/0x17d6 ... The problem is that lwtunnel_build_state is called with rtnl lock held preventing mpls_init from registering. Given the potential references held by the time lwtunnel_build_state it can not drop the rtnl lock to the load module. So, extract the module loading code from lwtunnel_build_state into a new function to validate the encap type. The new function is called while converting the user request into a fib_config which is well before any table, device or fib entries are examined. Fixes: 745041e2aaf1 ("lwtunnel: autoload of lwt modules") Signed-off-by: David Ahern Signed-off-by: David S. Miller

netfilter: rpfilter: fix incorrect loopback packet judgment

2017-01-16T13:23:01Z

Currently, we check the existing rtable in PREROUTING hook, if RTCF_LOCAL is set, we assume that the packet is loopback. But this assumption is incorrect, for example, a packet encapsulated in ipsec transport mode was received and routed to local, after decapsulation, it would be delivered to local again, and the rtable was not dropped, so RTCF_LOCAL check would trigger. But actually, the packet was not loopback. So for these normal loopback packets, we can check whether the in device is IFF_LOOPBACK or not. For these locally generated broadcast/multicast, we can check whether the skb->pkt_type is PACKET_LOOPBACK or not. Finally, there's a subtle difference between nft fib expr and xtables rpfilter extension, user can add the following nft rule to do strict rpfilter check: # nft add rule x y meta iif eth0 fib saddr . iif oif != eth0 drop So when the packet is loopback, it's better to store the in device instead of the LOOPBACK_IFINDEX, otherwise, after adding the above nft rule, locally generated broad/multicast packets will be dropped incorrectly. Fixes: f83a7ea2075c ("netfilter: xt_rpfilter: skip locally generated broadcast/multicast, too") Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso