user/sven/linux.git/include/scsi/libsas.h, branch v5.4.76

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-07-11T22:14:01Z

Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...

scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()

2019-06-20T19:37:02Z

Many times in libsas, and in LLDDs which use libsas, the check for an expander device is re-implemented or open coded. Use dev_is_expander() instead. We rename this from sas_dev_type_is_expander() to not spill so many lines in referencing. Signed-off-by: John Garry Reviewed-by: Jason Yan Reviewed-by: Jack Wang Signed-off-by: Martin K. Petersen

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 59

2019-05-24T15:36:44Z

Based on 1 normalized pattern(s): this file is licensed under gplv2 this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.561902672@linutronix.de Signed-off-by: Greg Kroah-Hartman

scsi: libsas: switch remaining files to SPDX tags

2019-05-21T10:16:22Z

Use the the GPLv2 SPDX tag instead of verbose boilerplate text. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: libsas: Inject revalidate event for root port event

2019-04-15T22:55:00Z

According to the SAS spec, an expander device shall transmit BROADCAST (CHANGE) from at least one phy in each expander port other than the expander port that is the cause for transmitting BROADCAST (CHANGE). As such, for when the link is lost for a root PHY attached to an expander PHY, we get no broadcast event. This causes an issue for libsas, in that we will not revalidate the domain for these events. As a solution, for when a root PHY is formed or deformed from a root port, insert a broadcast event to trigger a domain revalidation. Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: libsas: Stop hardcoding SAS address length

2019-04-15T22:55:00Z

Many times we use 8 for SAS address length, while we already have a macro for this - SAS_ADDR_SIZE. Replace instances of this with the macro. However, don't touch the SAS address array sizes sas.h, as these are defined according to the SAS spec. Some missing whitespaces are also added, and whitespace indentation in sas_hash_addr() is also fixed (see sas_hash_addr()). Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_template

2019-02-08T22:33:00Z

Clang warns several times in the scsi subsystem (trimmed for brevity): drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to switch condition type (2147762695 to 18446744071562347015) [-Wswitch] case CCISS_GETBUSTYPES: ^ drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to switch condition type (2147762694 to 18446744071562347014) [-Wswitch] case CCISS_GETHEARTBEAT: ^ The root cause is that the _IOC macro can generate really large numbers, which don't fit into type 'int', which is used for the cmd parameter in the ioctls in scsi_host_template. My research into how GCC and Clang are handling this at a low level didn't prove fruitful. However, looking at the rest of the kernel tree, all ioctls use an 'unsigned int' for the cmd parameter, which will fit all of the _IOC values in the scsi/ata subsystems. Make that change because none of the ioctls expect a negative value for any command, it brings the ioctls inline with the reset of the kernel, and it removes ambiguity, which is never good when dealing with compilers. Link: https://github.com/ClangBuiltLinux/linux/issues/85 Link: https://github.com/ClangBuiltLinux/linux/issues/154 Link: https://github.com/ClangBuiltLinux/linux/issues/157 Signed-off-by: Nathan Chancellor Acked-by: Bradley Grove Acked-by: Don Brace Reviewed-by: Bart Van Assche Tested-by: Nick Desaulniers Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: libsas: Fix some indentation in libsas.h

2019-01-12T03:14:24Z

Currently much indentation in this file is done with whitespaces instead of tabs, which can make reading difficult, so fix this up. Some other little minor tidy-up is done, but this file still has many other checkpatch warnings (generally linelength > 80 or function arguments have no identifier names). All libsas code can be audited for checkpatch issues later. Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: libsas: dynamically allocate and free ata host

2018-06-20T02:02:25Z

Commit 2623c7a5f2 ("libata: add refcounting to ata_host") v4.17+ introduced refcounting to ata_host and will increase or decrease the refcount when adding or deleting transport ATA port. Now the ata host for libsas is embedded in domain_device, and the ->kref member is not initialized. Afer we add ata transport class, ata_host_get() will be called when adding transport ATA port and a warning will be triggered as below: refcount_t: increment on 0; use-after-free. WARNING: CPU: 2 PID: 103 at lib/refcount.c:153 refcount_inc+0x40/0x48 ...... Call trace: refcount_inc+0x40/0x48 ata_host_get+0x10/0x18 ata_tport_add+0x40/0x120 ata_sas_tport_add+0xc/0x14 sas_ata_init+0x7c/0xc8 sas_discover_domain+0x380/0x53c process_one_work+0x12c/0x288 worker_thread+0x58/0x3f0 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 And also when removing transport ATA port ata_host_put() will be called and another similar warning will be triggered. If the refcount decreased to zero, the ata host will be freed. But this ata host is only part of domain_device, it cannot be freed directly. So we have to change this embedded static ata host to a dynamically allocated ata host and initialize the ->kref member. To use ata_host_get() and ata_host_put() in libsas, we need to move the declaration of these functions to the public libata.h and export them. Fixes: b6240a4df018 ("scsi: libsas: add transport class for ATA devices") Signed-off-by: Jason Yan CC: John Garry CC: Taras Kondratiuk CC: Tejun Heo Acked-by: Tejun Heo Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-01-31T19:23:28Z

Pull SCSI updates from James Bottomley: "This is mostly updates of the usual driver suspects: arcmsr, scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas, hisi_sas. We also have a rework of the libsas hotplug handling to make it more robust, a slew of 32 bit time conversions and fixes, and a host of the usual minor updates and style changes. The biggest potential for regressions is the libsas hotplug changes, but so far they seem stable under testing" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits) scsi: qla2xxx: Fix logo flag for qlt_free_session_done() scsi: arcmsr: avoid do_gettimeofday scsi: core: Add VENDOR_SPECIFIC sense code definitions scsi: qedi: Drop cqe response during connection recovery scsi: fas216: fix sense buffer initialization scsi: ibmvfc: Remove unneeded semicolons scsi: hisi_sas: fix a bug in hisi_sas_dev_gone() scsi: hisi_sas: directly attached disk LED feature for v2 hw scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw scsi: megaraid_sas: NVMe passthrough command support scsi: megaraid: use ktime_get_real for firmware time scsi: fnic: use 64-bit timestamps scsi: qedf: Fix error return code in __qedf_probe() scsi: devinfo: fix format of the device list scsi: qla2xxx: Update driver version to 10.00.00.05-k scsi: qla2xxx: Add XCB counters to debugfs scsi: qla2xxx: Fix queue ID for async abort with Multiqueue scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event() scsi: qla2xxx: Fix warning during port_name debug print scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout() ...