Linux Kernel https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v3.2.83 2014-08-06T17:07:33Z 2014-08-06T17:07:33Z Alan Stern stern@rowland.harvard.edu 2014-06-30T15:04:21Z urn:sha1:27bbd86f9319dbeeb588b8f43fe0ac241ad336ba commit b14bf2d0c0358140041d1c1805a674376964d0e0 upstream. Some buggy JMicron USB-ATA bridges don't know how to translate the FUA bit in READs or WRITEs. This patch adds an entry in unusual_devs.h and a blacklist flag to tell the sd driver not to use FUA. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Michael Büsch <m@bues.ch> Tested-by: Michael Büsch <m@bues.ch> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust context - Use sd_printk() not sd_first_printk()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 2014-07-11T12:33:56Z James Bottomley JBottomley@Parallels.com 2014-01-21T15:00:50Z urn:sha1:181086c6cc8a186f26bbb87872e48bb7973fdc28 commit e63ed0d7a98014fdfc2cfeb3f6dada313dcabb59 upstream. This patch eliminates the reap_ref and replaces it with a proper kref. On last put of this kref, the target is removed from visibility in sysfs. The final call to scsi_target_reap() for the device is done from __scsi_remove_device() and only if the device was made visible. This ensures that the target disappears as soon as the last device is gone rather than waiting until final release of the device (which is often too long). Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 2014-04-01T23:58:45Z Boaz Harrosh bharrosh@panasas.com 2013-11-21T15:58:08Z urn:sha1:c99cf525de222205729192b47e2b859096abe03a commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream. At IO preparation we calculate the max pages at each device and allocate a BIO per device of that size. The calculation was wrong on some unaligned corner cases offset/length combination and would make prepare return with -ENOMEM. This would be bad for pnfs-objects that would in that case IO through MDS. And fatal for exofs were it would fail writes with EIO. Fix it by doing the proper math, that will work in all cases. (I ran a test with all possible offset/length combinations this time round). Also when reading we do not need to allocate for the parity units since we jump over them. Also lower the max_io_length to take into account the parity pages so not to allocate BIOs bigger than PAGE_SIZE Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 2012-07-25T03:11:12Z Dan Williams dan.j.williams@intel.com 2012-06-22T17:52:34Z urn:sha1:cb480c94c8e89014cdb54201a413bf9d36f6cd41 commit 6ef1b512f4e6f936d89aa20be3d97a7ec7c290ac upstream. fill_result_tf() grabs the taskfile flags from the originating qc which sas_ata_qc_fill_rtf() promptly overwrites. The presence of an ata_taskfile in the sata_device makes it tempting to just copy the full contents in sas_ata_qc_fill_rtf(). However, libata really only wants the fis contents and expects the other portions of the taskfile to not be touched by ->qc_fill_rtf. To that end store a fis buffer in the sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf() implementation. Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 2011-12-15T07:02:07Z john fastabend john.r.fastabend@intel.com 2011-11-18T21:35:56Z urn:sha1:6f6c2aa33b915c574543f176dee89d7aefc115c1 Use DCB notifiers to set the skb priority to allow packets to be steered and tagged correctly over DCB enabled drivers that setup traffic classes. This allows queue_mapping() routines to be removed in these drivers that were previously inspecting the ethertype of every skb to mark FCoE/FIP frames. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2011-10-28T23:44:18Z Linus Torvalds torvalds@linux-foundation.org 2011-10-28T23:44:18Z urn:sha1:ec7ae517537ae5c7b0b2cd7f562dfa3e7a05b954 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ... 2011-10-25T00:15:33Z Boaz Harrosh bharrosh@panasas.com 2011-10-14T13:33:51Z urn:sha1:769ba8d92025fa390f3097e658b8ed6e032d68e9 This is finally the RAID5 Write support. The bigger part of this patch is not the XOR engine itself, But the read4write logic, which is a complete mini prepare_for_striping reading engine that can read scattered pages of a stripe into cache so it can be used for XOR calculation. That is, if the write was not stripe aligned. The main algorithm behind the XOR engine is the 2 dimensional array: struct __stripe_pages_2d. A drawing might save 1000 words --- __stripe_pages_2d | n = pages_in_stripe_unit; w = group_width - parity; | pages array presented to the XOR lib | | V | __1_page_stripe[0].pages --> [c0][c1]..[cw][c_par] <---| | | __1_page_stripe[1].pages --> [c0][c1]..[cw][c_par] <--- | ... | ... | __1_page_stripe[n].pages --> [c0][c1]..[cw][c_par] ^ | data added columns first then row --- The pages are put on this array columns first. .i.e: p0-of-c0, p1-of-c0, ... pn-of-c0, p0-of-c1, ... So we are doing a corner turn of the pages. Note that pages will zigzag down and left. but are put sequentially in growing order. So when the time comes to XOR the stripe, only the beginning and end of the array need be checked. We scan the array and any NULL spot will be field by pages-to-be-read. The FS that wants to support RAID5 needs to supply an operations-vector that searches a given page in cache, and specifies if the page is uptodate or need reading. All these pages to be read are put on a slave ore_io_state and synchronously read. All the pages of a stripe are read in one IO, using the scatter gather mechanism. In write we constrain our IO to only be incomplete on a single stripe. Meaning either the complete IO is within a single stripe so we might have pages to read from both beginning or end of the strip. Or we have some reading to do at beginning but end at strip boundary. The left over pages are pushed to the next IO by the API already established by previous work, where an IO offset/length combination presented to the ORE might get the length truncated and the user must re-submit the leftover pages. (Both exofs and NFS support this) But any ORE user should make it's best effort to align it's IO before hand and avoid complications. A cached ore_layout->stripe_size member can be used for that calculation. (NOTE: that ORE demands that stripe_size may not be bigger then 32bit) What else? Well read it and tell me. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> 2011-10-24T23:55:36Z Boaz Harrosh bharrosh@panasas.com 2011-10-12T16:42:22Z urn:sha1:a1fec1dbbc8db974d2582e4040590cebe72171e4 This patch introduces the first stage of RAID5 support mainly the skip-over-raid-units when reading. For writes it inserts BLANK units, into where XOR blocks should be calculated and written to. It introduces the new "general raid maths", and the main additional parameters and components needed for raid5. Since at this stage it could corrupt future version that actually do support raid5. The enablement of raid5 mounting and setting of parity-count > 0 is disabled. So the raid5 code will never be used. Mounting of raid5 is only enabled later once the basic XOR write is also in. But if the patch "enable RAID5" is applied this code has been tested to be able to properly read raid5 volumes and is according to standard. Also it has been tested that the new maths still properly supports RAID0 and grouping code just as before. (BTW: I have found more bugs in the pnfs-obj RAID math fixed here) The ore.c file is getting too big, so new ore_raid.[hc] files are added that will include the special raid stuff that are not used in striping and mirrors. In future write support these will get bigger. When adding the ore_raid.c to Kbuild file I was forced to rename ore.ko to libore.ko. Is it possible to keep source file, say ore.c and module file ore.ko the same even if there are multiple files inside ore.ko? Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> 2011-10-24T23:30:08Z Boaz Harrosh bharrosh@panasas.com 2011-10-04T12:20:17Z urn:sha1:611d7a5dc6f2a1a0cfd8cc07b9d15f794cbe5f98 ore_calc_stripe_info is needed by exofs::export.c for the layout calculations. Make it exportable Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> 2011-10-20T15:13:55Z Mike Christie michaelc@cs.wisc.edu 2011-10-11T22:55:11Z urn:sha1:2d63673b4d469cf2ddba309a916090b54e31cc35 Userspace was sending the priority/id part of the vlan tag and sysfs was displaying the id in the vlan file. This renames the vlan sysfs file to vlan_id to reflect that it was showing the id and to match the vlan_priority file. This also adds a ISCSI_NET_PARAM_VLAN_TAG iscsi nl command to relfect that we are sending down the vlan/priority part of the tag. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>