user/sven/linux.git/include/scsi, branch v4.19.59

scsi: fcoe: make use of fip_mode enum complete

2019-04-05T20:33:04Z

[ Upstream commit 8beb90aaf334a6efa3e924339926b5f93a234dbb ] commit 1917d42d14b7 ("fcoe: use enum for fip_mode") introduces a separate enum for the fip_mode that shall be used during initialisation handling until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That change was incomplete and gcc quietly converted in various places between the fip_mode and the fip_state enum values with implicit enum conversions, which fortunately cannot cause any issues in the actual code's execution. clang however warns about these implicit enum conversions in the scsi drivers. This commit consolidates the use of the two enums, guided by clang's enum-conversion warnings. This commit now completes the use of the fip_mode: It expects and uses fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to indicate these two enums are distinct. Link: https://github.com/ClangBuiltLinux/linux/issues/151 Fixes: 1917d42d14b7 ("fcoe: use enum for fip_mode") Reported-by: Dmitry Golovin Original-by: Lukas Bulwahn CC: Lukas Bulwahn CC: Nick Desaulniers CC: Nathan Chancellor Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Suggested-by: Johannes Thumshirn Signed-off-by: Sedat Dilek Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-08-16T05:06:26Z

Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...

scsi: Check sense buffer size at build time

2018-08-02T21:23:51Z

To avoid introducing problems like those fixed in commit f7068114d45e ("sr: pass down correctly sized SCSI sense buffer"), this creates a macro wrapper for scsi_execute() that verifies the size of the sense buffer similar to what was done for command string sizes in commit 3756f6401c30 ("exec: avoid gcc-8 warning for get_task_comm"). Another solution could be to add a length argument to scsi_execute(), but this function already takes a lot of arguments and Jens was not fond of that approach. Additionally, this moves the SCSI_SENSE_BUFFERSIZE definition into scsi_device.h, and removes a redundant include for scsi_device.h from scsi_cmnd.h. Reviewed-by: Christoph Hellwig Signed-off-by: Kees Cook Signed-off-by: Jens Axboe

block: move ref_tag calculation func to the block layer

2018-07-30T14:27:01Z

Currently this function is implemented in the scsi layer, but it's actual place should be the block layer since T10-PI is a general data integrity feature that is used in the nvme protocol as well. Suggested-by: Christoph Hellwig Cc: Martin K. Petersen Signed-off-by: Max Gurtovoy Signed-off-by: Jens Axboe

scsi: read host_busy via scsi_host_busy()

2018-06-26T16:53:26Z

No functional change. Just introduce scsi_host_busy() and replace the direct read of scsi_host->host_busy with this new API. Cc: Omar Sandoval , Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Mike Snitzer Cc: Hannes Reinecke Cc: Laurence Oberman Cc: Bart Van Assche Signed-off-by: Ming Lei Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: libsas: dynamically allocate and free ata host

2018-06-20T02:02:25Z

Commit 2623c7a5f2 ("libata: add refcounting to ata_host") v4.17+ introduced refcounting to ata_host and will increase or decrease the refcount when adding or deleting transport ATA port. Now the ata host for libsas is embedded in domain_device, and the ->kref member is not initialized. Afer we add ata transport class, ata_host_get() will be called when adding transport ATA port and a warning will be triggered as below: refcount_t: increment on 0; use-after-free. WARNING: CPU: 2 PID: 103 at lib/refcount.c:153 refcount_inc+0x40/0x48 ...... Call trace: refcount_inc+0x40/0x48 ata_host_get+0x10/0x18 ata_tport_add+0x40/0x120 ata_sas_tport_add+0xc/0x14 sas_ata_init+0x7c/0xc8 sas_discover_domain+0x380/0x53c process_one_work+0x12c/0x288 worker_thread+0x58/0x3f0 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 And also when removing transport ATA port ata_host_put() will be called and another similar warning will be triggered. If the refcount decreased to zero, the ata host will be freed. But this ata host is only part of domain_device, it cannot be freed directly. So we have to change this embedded static ata host to a dynamically allocated ata host and initialize the ->kref member. To use ata_host_get() and ata_host_put() in libsas, we need to move the declaration of these functions to the public libata.h and export them. Fixes: b6240a4df018 ("scsi: libsas: add transport class for ATA devices") Signed-off-by: Jason Yan CC: John Garry CC: Taras Kondratiuk CC: Tejun Heo Acked-by: Tejun Heo Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-06-10T20:01:12Z

Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...

block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONE

2018-05-29T14:59:21Z

The BLK_EH_NOT_HANDLED implies nothing happen, but very often that is not what is happening - instead the driver already completed the command. Fix the symbolic name to reflect that a little better. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Jens Axboe

scsi/osd: remove the gfp argument to osd_start_request

2018-05-14T14:55:09Z

Always GFP_KERNEL, and keeping it would cause serious complications for the next change. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS

2018-04-20T23:14:36Z

On Fujitsu ETERNUS systems, sense code ABORTED COMMAND with ASC/Q C1/01 is used to indicate temporary condition where the storage-internal path to a target is switched from one controller to another. SCSI commands that return with this error code must be retried unconditionally (i.e. without the "maybe_retry" logic in scsi_decide_disposition); otherwise dm-multipath might initiate a failover from a healthy path e.g. for REQ_FAILFAST_DEV commands. Introduce a new blist flag for this case. [mkp: applied by hand] Signed-off-by: Martin Wilck Signed-off-by: Martin K. Petersen