user/sven/linux.git/include/scsi, branch v5.0.19

scsi: fcoe: make use of fip_mode enum complete

2019-04-05T20:34:33Z

[ Upstream commit 8beb90aaf334a6efa3e924339926b5f93a234dbb ] commit 1917d42d14b7 ("fcoe: use enum for fip_mode") introduces a separate enum for the fip_mode that shall be used during initialisation handling until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That change was incomplete and gcc quietly converted in various places between the fip_mode and the fip_state enum values with implicit enum conversions, which fortunately cannot cause any issues in the actual code's execution. clang however warns about these implicit enum conversions in the scsi drivers. This commit consolidates the use of the two enums, guided by clang's enum-conversion warnings. This commit now completes the use of the fip_mode: It expects and uses fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to indicate these two enums are distinct. Link: https://github.com/ClangBuiltLinux/linux/issues/151 Fixes: 1917d42d14b7 ("fcoe: use enum for fip_mode") Reported-by: Dmitry Golovin Original-by: Lukas Bulwahn CC: Lukas Bulwahn CC: Nick Desaulniers CC: Nathan Chancellor Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Suggested-by: Johannes Thumshirn Signed-off-by: Sedat Dilek Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2018-12-28T22:57:10Z

Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-12-28T22:48:06Z

Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...

include/scsi/srp.h: Add support for immediate data

2018-12-19T20:07:25Z

Add constants and data structures to support immediate data. These changes conform to SRP2r04. Cc: Sergey Gorenko Cc: Max Gurtovoy Cc: Laurence Oberman Signed-off-by: Bart Van Assche Signed-off-by: Doug Ledford

include/scsi/srp.h: Move response flag definitions into this file

2018-12-19T20:07:25Z

This patch moves all constants that come from the SRP standard into the include/scsi/srp.h header file. Cc: Sergey Gorenko Cc: Max Gurtovoy Cc: Laurence Oberman Signed-off-by: Bart Van Assche Signed-off-by: Doug Ledford

scsi: remove the use_clustering flag

2018-12-19T04:19:21Z

The same effects can be achieved by setting the dma_boundary to PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those settings into the drivers. Note that in many cases the setting might be bogus, but this keeps the status quo. [mkp: fix myrs and myrb] Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: introduce a max_segment_size host_template parameters

2018-12-19T04:13:12Z

This allows the host driver to indicate the maximum supported segment size in a nice an easy way, so that the driver doesn't have to worry about DMA-layer imposed limitations. Signed-off-by: Christoph Hellwig Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: flip the default on use_clustering

2018-12-19T04:13:12Z

Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: Fix a harmless double shift bug

2018-12-08T05:27:01Z

Smatch generates a warning: drivers/scsi/scsi_lib.c:1656 scsi_mq_done() warn: test_bit() takes a bit number The problem is that SCMD_STATE_COMPLETE is supposed to be bit number 0 and not a mask like "(1 << 0)". It is used like this: if (test_and_set_bit(SCMD_STATE_COMPLETE, &scmd->state)) The test_and_set_bit() has a shift built in so it's a double left shift and uses bit number 1 instead of number 0. This bug is harmless because it's done consistently and it doesn't clash with any other flags. Fixes: f1342709d18a ("scsi: Do not rely on blk-mq for double completions") Reviewed-by: Keith Busch Acked-by: Martin K. Petersen Signed-off-by: Dan Carpenter Signed-off-by: Jens Axboe

scsi: Do not rely on blk-mq for double completions

2018-11-26T17:34:26Z

The scsi timeout error handling had been directly updating the block layer's request state to prevent a error handling and a natural completion from completing the same request twice. Fix this layering violation by having scsi control the fate of its commands with scsi owned flags rather than use blk-mq's. Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Jens Axboe