user/sven/linux.git/include/scsi, branch v6.11.3

scsi: core: Fix the return value of scsi_logical_block_count()

2024-08-17T01:02:06Z

scsi_logical_block_count() should return the block count of a given SCSI command. The original implementation ended up shifting twice, leading to an incorrect count being returned. Fix the conversion between bytes and logical blocks. Cc: stable@vger.kernel.org Fixes: 6a20e21ae1e2 ("scsi: core: Add helper to return number of logical blocks in a request") Signed-off-by: Chaotian Jing Link: https://lore.kernel.org/r/20240813053534.7720-1-chaotian.jing@mediatek.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2024-07-25T17:42:22Z

Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...

Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux

2024-07-15T21:20:22Z

Pull block updates from Jens Axboe: - NVMe updates via Keith: - Device initialization memory leak fixes (Keith) - More constants defined (Weiwen) - Target debugfs support (Hannes) - PCIe subsystem reset enhancements (Keith) - Queue-depth multipath policy (Redhat and PureStorage) - Implement get_unique_id (Christoph) - Authentication error fixes (Gaosheng) - MD updates via Song - sync_action fix and refactoring (Yu Kuai) - Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li) - Fix loop detach/open race (Gulam) - Fix lower control limit for blk-throttle (Yu) - Add module descriptions to various drivers (Jeff) - Add support for atomic writes for block devices, and statx reporting for same. Includes SCSI and NVMe (John, Prasad, Alan) - Add IO priority information to block trace points (Dongliang) - Various zone improvements and tweaks (Damien) - mq-deadline tag reservation improvements (Bart) - Ignore direct reclaim swap writes in writeback throttling (Baokun) - Block integrity improvements and fixes (Anuj) - Add basic support for rust based block drivers. Has a dummy null_blk variant for now (Andreas) - Series converting driver settings to queue limits, and cleanups and fixes related to that (Christoph) - Cleanup for poking too deeply into the bvec internals, in preparation for DMA mapping API changes (Christoph) - Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas, Ming, Zhu, Damien, Christophe, Chaitanya) * tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits) floppy: add missing MODULE_DESCRIPTION() macro loop: add missing MODULE_DESCRIPTION() macro ublk_drv: add missing MODULE_DESCRIPTION() macro xen/blkback: add missing MODULE_DESCRIPTION() macro block/rnbd: Constify struct kobj_type block: take offset into account in blk_bvec_map_sg again block: fix get_max_segment_size() warning loop: Don't bother validating blocksize virtio_blk: Don't bother validating blocksize null_blk: Don't bother validating blocksize block: Validate logical block size in blk_validate_limits() virtio_blk: Fix default logical block size fallback nvmet-auth: fix nvmet_auth hash error handling nvme: implement ->get_unique_id block: pass a phys_addr_t to get_max_segment_size block: add a bvec_phys helper blk-lib: check for kill signal in ioctl BLKZEROOUT block: limit the Write Zeroes to manually writing zeroes fallback block: refacto blkdev_issue_zeroout block: move read-only and supported checks into (__)blkdev_issue_zeroout ...

driver core: have match() callback in struct bus_type take a const *

2024-07-03T13:16:54Z

In the match() callback, the struct device_driver * should not be changed, so change the function callback to be a const *. This is one step of many towards making the driver core safe to have struct device_driver in read-only memory. Because the match() callback is in all busses, all busses are modified to handle this properly. This does entail switching some container_of() calls to container_of_const() to properly handle the constant *. For some busses, like PCI and USB and HV, the const * is cast away in the match callback as those busses do want to modify those structures at this point in time (they have a local lock in the driver structure.) That will have to be changed in the future if they wish to have their struct device * in read-only-memory. Cc: Rafael J. Wysocki Reviewed-by: Alex Elder Acked-by: Sumit Garg Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh Signed-off-by: Greg Kroah-Hartman

scsi: sd: Atomic write support

2024-06-20T21:19:17Z

Support is divided into two main areas: - reading VPD pages and setting sdev request_queue limits - support WRITE ATOMIC (16) command and tracing The relevant block limits VPD page need to be read to allow the block layer request_queue atomic write limits to be set. These VPD page limits are described in sbc4r22 section 6.6.4 - Block limits VPD page. There are five limits of interest: - MAXIMUM ATOMIC TRANSFER LENGTH - ATOMIC ALIGNMENT - ATOMIC TRANSFER LENGTH GRANULARITY - MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY - MAXIMUM ATOMIC BOUNDARY SIZE MAXIMUM ATOMIC TRANSFER LENGTH is the maximum length for a WRITE ATOMIC (16) command. It will not be greater than the device MAXIMUM TRANSFER LENGTH. ATOMIC ALIGNMENT and ATOMIC TRANSFER LENGTH GRANULARITY are the minimum alignment and length values for an atomic write in terms of logical blocks. Unlike NVMe, SCSI does not specify an LBA space boundary, but does specify a per-IO boundary granularity. The maximum boundary size is specified in MAXIMUM ATOMIC BOUNDARY SIZE. When used, this boundary value is set in the WRITE ATOMIC (16) ATOMIC BOUNDARY field - layout for the WRITE_ATOMIC_16 command can be found in sbc4r22 section 5.48. This boundary value is the granularity size at which the device may atomically write the data. A value of zero in WRITE ATOMIC (16) ATOMIC BOUNDARY field means that all data must be atomically written together. MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY is the maximum atomic write length if a non-zero boundary value is set. For atomic write support, the WRITE ATOMIC (16) boundary is not of much interest, as the block layer expects each request submitted to be executed atomically. However, the SCSI spec does leave itself open to a quirky scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero, yet MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY and MAXIMUM ATOMIC BOUNDARY SIZE are both non-zero. This case will be supported. To set the block layer request_queue atomic write capabilities, sanitize the VPD page limits and set limits as follows: - atomic_write_unit_min is derived from granularity and alignment values. If no granularity value is not set, use physical block size - atomic_write_unit_max is derived from MAXIMUM ATOMIC TRANSFER LENGTH. In the scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero and boundary limits are non-zero, use MAXIMUM ATOMIC BOUNDARY SIZE for atomic_write_unit_max. New flag scsi_disk.use_atomic_write_boundary is set for this scenario. - atomic_write_boundary_bytes is set to zero always SCSI also supports a WRITE ATOMIC (32) command, which is for type 2 protection enabled. This is not going to be supported now, so check for T10_PI_TYPE2_PROTECTION when setting any request_queue limits. To handle an atomic write request, add support for WRITE ATOMIC (16) command in handler sd_setup_atomic_cmnd(). Flag use_atomic_write_boundary is checked here for encoding ATOMIC BOUNDARY field. Trace info is also added for WRITE_ATOMIC_16 command. Reviewed-by: Martin K. Petersen Signed-off-by: John Garry Acked-by: Darrick J. Wong Reviewed-by: Darrick J. Wong Link: https://lore.kernel.org/r/20240620125359.2684798-9-john.g.garry@oracle.com Signed-off-by: Jens Axboe

scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag

2024-06-14T01:03:13Z

Prepare for skipping the IO Advice Hints Grouping mode page for USB storage devices. Cc: Alan Stern Cc: Joao Machado Cc: Andy Shevchenko Cc: Christian Heusel Cc: stable@vger.kernel.org Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240613211828.2077477-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: mpi3mr: Fix ATA NCQ priority support

2024-06-12T01:40:23Z

The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to the HBA if a read or write command directed at an ATA device should be translated to an NCQ read/write command with the high prioiryt bit set when the request uses the RT priority class and the user has enabled NCQ priority through sysfs. However, unlike the mpt3sas driver, the mpi3mr driver does not define the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never actually set and NCQ Priority cannot ever be used. Fix this by defining these missing atributes to allow a user to check if an ATA device supports NCQ priority and to enable/disable the use of NCQ priority. To do this, lift the function scsih_ncq_prio_supp() out of the mpt3sas driver and make it the generic SCSI SAS transport function sas_ata_ncq_prio_supported(). Nothing in that function is hardware specific, so this function can be used in both the mpt3sas driver and the mpi3mr driver. Reported-by: Scott McCoy Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-05-15T01:25:53Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...

scsi: libfc: Add some kernel-doc comments

2024-04-25T01:29:27Z

Complete the kernel-doc notation for enum fc_lport_state. This fixes 7 kernel-doc warnings. - In struct fc_rport_priv, change 'event_callback' to 'lld_event_callback' to match the struct member name. - In struct fc_fcp_pkt, add a description for 'timer_delay' to eliminate one kernel-doc warning. - Add return value notation for 3 functions. This fixes 3 kernel-doc warnings. There are still 12 warnings for struct members not described in struct fc_rport_priv and struct fc_lport, e.g: libfc.h:218: warning: Function parameter or struct member 'event' not described in 'fc_rport_priv' libfc.h:760: warning: Function parameter or struct member 'vlan' not described in 'fc_lport' Warnings that are fixed in this patch: libfc.h:75: warning: Enum value 'LPORT_ST_RNN_ID' not described in enum 'fc_lport_state' libfc.h:75: warning: Enum value 'LPORT_ST_RSNN_NN' not described in enum 'fc_lport_state' libfc.h:75: warning: Enum value 'LPORT_ST_RSPN_ID' not described in enum 'fc_lport_state' libfc.h:75: warning: Enum value 'LPORT_ST_RPA' not described in enum 'fc_lport_state' libfc.h:75: warning: Enum value 'LPORT_ST_DHBA' not described in enum 'fc_lport_state' libfc.h:75: warning: Enum value 'LPORT_ST_DPRT' not described in enum 'fc_lport_state' libfc.h:75: warning: Excess enum value 'LPORT_ST_RPN_ID' description in 'fc_lport_state' libfc.h:218: warning: Excess struct member 'event_callback' description in 'fc_rport_priv' libfc.h:793: warning: No description found for return value of 'fc_lport_test_ready' libfc.h:835: warning: No description found for return value of 'fc_lport_init_stats' libfc.h:856: warning: No description found for return value of 'lport_priv' Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20240424050038.31403-1-rdunlap@infradead.org Cc: Hannes Reinecke Cc: James E.J. Bottomley Cc: Martin K. Petersen Signed-off-by: Martin K. Petersen

scsi: core: Don't use "proxy" headers

2024-04-25T01:27:15Z

Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240423211843.3996046-1-andriy.shevchenko@linux.intel.com Signed-off-by: Martin K. Petersen