user/sven/linux.git/include/scsi, branch v6.6.6

scsi: sd: Fix system start for ATA devices

2023-12-08T07:52:17Z

commit b09d7f8fd50f6e93cbadd8d27fde178f745b42a1 upstream. It is not always possible to keep a device in the runtime suspended state when a system level suspend/resume cycle is executed. E.g. for ATA devices connected to AHCI adapters, system resume resets the ATA ports, which causes connected devices to spin up. In such case, a runtime suspended disk will incorrectly be seen with a suspended runtime state because the device is not resumed by sd_resume_system(). The power state seen by the user is different than the actual device physical power state. Fix this issue by introducing the struct scsi_device flag force_runtime_start_on_system_start. When set, this flag causes sd_resume_system() to request a runtime resume operation for runtime suspended devices. This results in the user seeing the device runtime_state as active after a system resume, thus correctly reflecting the device physical power state. Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: Change SCSI device boolean fields to single bit flags

2023-12-08T07:52:17Z

commit 6371be7aeb986905bb60ec73d002fc02343393b4 upstream. Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") changed the single bit manage_start_stop flag into 2 boolean fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") introduced the manage_shutdown boolean field for the same structure. Together, these 2 commits increase the size of struct scsi_device by 8 bytes by using booleans instead of defining the manage_xxx fields as single bit flags, similarly to other flags of this structure. Avoid this unnecessary structure size increase and be consistent with the definition of other flags by reverting the definitions of the manage_xxx fields as single bit flags. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: sd: Introduce manage_shutdown device flag

2023-10-27T01:00:19Z

Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") change setting the manage_system_start_stop flag to false for libata managed disks to enable libata internal management of disk suspend/resume. However, a side effect of this change is that on system shutdown, disks are no longer being stopped (set to standby mode with the heads unloaded). While this is not a critical issue, this unclean shutdown is not recommended and shows up with increased smart counters (e.g. the unexpected power loss counter "Unexpect_Power_Loss_Ct"). Instead of defining a shutdown driver method for all ATA adapter drivers (not all of them define that operation), this patch resolves this issue by further refining the sd driver start/stop control of disks using the new flag manage_shutdown. If this new flag is set to true by a low level driver, the function sd_shutdown() will issue a START STOP UNIT command with the start argument set to 0 when a disk needs to be powered off (suspended) on system power off, that is, when system_state is equal to SYSTEM_POWER_OFF. Similarly to the other manage_xxx flags, the new manage_shutdown flag is exposed through sysfs as a read-write device attribute. To avoid any confusion between manage_shutdown and manage_system_start_stop, the comments describing these flags in include/scsi/scsi.h are also improved. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038 Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/ Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Hannes Reinecke Reviewed-by: James Bottomley Acked-by: Martin K. Petersen

Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-09-29T20:38:34Z

Pull ATA fixes from Damien Le Moal: "A larger than usual set of fixes for 6.6-rc4 due to the unexpected number of fixes needed to address ATA disks suspend/resume issues. In more detail: - Add missing additionalProperties on child nodes to the pata-common DT bindings (Rob) - Fix handling of the REPORT SUPPORTED OPERATION CODES command to ignore reserved bits (Niklas) - Increase port multiplier soft reset timeout to accomodate slow devices and avoid issues on wakeup (Matthias) - A couple of minor code fixes to avoid compilation warnings in libata-core and libata-eh (me) - Many patches from me to address suspend/resume issues, and in particular a potential deadlock on resume due to the SCSI disk driver resume operation not being synchronized with libata EH port resume handling. This is addressed by changing the scsi disk driver disk start/stop control to allow libata to execute disk suspend (spin down) and resume (spin up) on its own during system suspend/resume. Runtime suspend/resume control remains with the SCSI disk driver. Other fixes include: - Fix libata power management request issuing to avoid races - Establish a link between ATA ports and SCSI devices to order PM operations - Fix device removal to avoid issues with driver rmmod removal - Fix synchronization of libata device rescan and SCSI disk resume operation - Remove libsas PM operations as suspend/resume is handled directly by the sas controller resume - Fix the SCSI disk driver to not issue commands to suspended disks, thus avoiding potential system lock-up on resume" * tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-eh: Fix compilation warning in ata_eh_link_report() ata: libata-core: Fix compilation warning in ata_dev_config_ncq() scsi: sd: Do not issue commands to suspended disks on shutdown ata: libata-core: Do not register PM operations for SAS ports ata: libata-scsi: Fix delayed scsi_rescan_device() execution scsi: Do not attempt to rescan suspended devices ata: libata-scsi: Disable scsi device manage_system_start_stop scsi: sd: Differentiate system and runtime start/stop management ata: libata-scsi: link ata port and scsi device ata: libata-core: Fix port and device removal ata: libata-core: Fix ata_port_request_pm() locking ata: libata-sata: increase PMP SRST timeout to 10s ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

scsi: Do not attempt to rescan suspended devices

2023-09-28T12:23:07Z

scsi_rescan_device() takes a scsi device lock before executing a device handler and device driver rescan methods. Waiting for the completion of any command issued to the device by these methods will thus be done with the device lock held. As a result, there is a risk of deadlocking within the power management code if scsi_rescan_device() is called to handle a device resume with the associated scsi device not yet resumed. Avoid such situation by checking that the target scsi device is in the running state, that is, fully capable of executing commands, before proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise. With this error return, the caller can retry rescaning the device after a delay. The state check is done with the device lock held and is thus safe against incoming suspend power management operations. Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Niklas Cassel Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Reviewed-by: Bart Van Assche

scsi: sd: Differentiate system and runtime start/stop management

2023-09-28T12:23:00Z

The underlying device and driver of a SCSI disk may have different system and runtime power mode control requirements. This is because runtime power management affects only the SCSI disk, while system level power management affects all devices, including the controller for the SCSI disk. For instance, issuing a START STOP UNIT command when a SCSI disk is runtime suspended and resumed is fine: the command is translated to a STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY command to wake it up. The SCSI disk runtime operations have no effect on the ata port device used to connect the ATA disk. However, for system suspend/resume operations, the ATA port used to connect the device will also be suspended and resumed, with the resume operation requiring re-validating the device link and the device itself. In this case, issuing a VERIFY command to spinup the disk must be done before starting to revalidate the device, when the ata port is being resumed. In such case, we must not allow the SCSI disk driver to issue START STOP UNIT commands. Allow a low level driver to refine the SCSI disk start/stop management by differentiating system and runtime cases with two new SCSI device flags: manage_system_start_stop and manage_runtime_start_stop. These new flags replace the current manage_start_stop flag. Drivers setting the manage_start_stop are modifed to set both new flags, thus preserving the existing start/stop management behavior. For backward compatibility, the old manage_start_stop sysfs device attribute is kept as a read-only attribute showing a value of 1 for devices enabling both new flags and 0 otherwise. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen

scsi: core: ata: Do no try to probe for CDL on old drives

2023-09-22T01:07:23Z

Some old drives (e.g. an Ultra320 SCSI disk as reported by John) do not seem to execute MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES commands correctly and hang when a non-zero service action is specified (one command format with service action case in scsi_report_opcode()). Currently, CDL probing with scsi_cdl_check_cmd() is the only caller using a non zero service action for scsi_report_opcode(). To avoid issues with these old drives, do not attempt CDL probe if the device reports support for an SPC version lower than 5 (CDL was introduced in SPC-5). To keep things working with ATA devices which probe for the CDL T2A and T2B pages introduced with SPC-6, modify ata_scsiop_inq_std() to claim SPC-6 version compatibility for ATA drives supporting CDL. SPC-6 standard version number is defined as Dh (= 13) in SPC-6 r09. Fix scsi_probe_lun() to correctly capture this value by changing the bit mask for the second byte of the INQUIRY response from 0x7 to 0xf. include/scsi/scsi.h is modified to add the definition SCSI_SPC_6 with the value 14 (Dh + 1). The missing definitions for the SCSI_SPC_4 and SCSI_SPC_5 versions are also added. Reported-by: John David Anglin Fixes: 624885209f31 ("scsi: core: Detect support for command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20230915022034.678121-1-dlemoal@kernel.org Tested-by: David Gow Reviewed-by: Bart Van Assche Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-09-09T19:01:33Z

Pull more SCSI updates from James Bottomley: "Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD scsi: mpt3sas: Remove volatile qualifier scsi: mpt3sas: Perform additional retries if doorbell read returns 0 scsi: libsas: Simplify sas_queue_reset() and remove unused code scsi: ufs: Fix the build for the old ARM OABI scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt() scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag() scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport" scsi: fnic: Replace sgreset tag with max_tag_id scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs() scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error scsi: smartpqi: Change driver version to 2.1.24-046 scsi: smartpqi: Enhance error messages scsi: smartpqi: Enhance controller offline notification scsi: smartpqi: Enhance shutdown notification scsi: smartpqi: Simplify lun_number assignment scsi: smartpqi: Rename pciinfo to pci_info scsi: smartpqi: Rename MACRO to clarify purpose scsi: smartpqi: Add abort handler ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-09-02T19:02:41Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas) and the usual minor updates and bug fixes but no significant core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (116 commits) scsi: storvsc: Handle additional SRB status values scsi: libsas: Delete sas_ata_task.retry_count scsi: libsas: Delete sas_ata_task.stp_affil_pol scsi: libsas: Delete sas_ata_task.set_affil_pol scsi: libsas: Delete sas_ssp_task.task_prio scsi: libsas: Delete sas_ssp_task.enable_first_burst scsi: libsas: Delete sas_ssp_task.retry_count scsi: libsas: Delete struct scsi_core scsi: libsas: Delete enum sas_phy_type scsi: libsas: Delete enum sas_class scsi: libsas: Delete sas_ha_struct.lldd_module scsi: target: Fix write perf due to unneeded throttling scsi: lpfc: Do not abuse UUID APIs and LPFC_COMPRESS_VMID_SIZE scsi: pm8001: Remove unused declarations scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock scsi: elx: sli4: Remove code duplication scsi: bfa: Replace one-element array with flexible-array member in struct fc_rscn_pl_s scsi: qla2xxx: Remove unused declarations scsi: pmcraid: Use pci_dev_id() to simplify the code scsi: pm80xx: Set RETFIS when requested by libsas ...

scsi: core: Improve type safety of scsi_rescan_device()

2023-08-25T02:11:29Z

Most callers of scsi_rescan_device() have the scsi_device pointer readily available. Pass a struct scsi_device pointer to scsi_rescan_device() instead of a struct device pointer. This change prevents that a pointer to another struct device would be passed accidentally to scsi_rescan_device(). Remove the scsi_rescan_device() declaration from the scsi_priv.h header file since it duplicates the declaration in . Reviewed-by: Hannes Reinecke Reviewed-by: Damien Le Moal Reviewed-by: John Garry Cc: Mike Christie Cc: Ming Lei Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20230822153043.4046244-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen