user/sven/linux.git/include/soc, branch v5.16

net: mscc: ocelot: create a function that replaces an existing VCAP filter

2021-11-26T19:38:20Z

VCAP (Versatile Content Aware Processor) is the TCAM-based engine behind tc flower offload on ocelot, among other things. The ingress port mask on which VCAP rules match is present as a bit field in the actual key of the rule. This means that it is possible for a rule to be shared among multiple source ports. When the rule is added one by one on each desired port, that the ingress port mask of the key must be edited and rewritten to hardware. But the API in ocelot_vcap.c does not allow for this. For one thing, ocelot_vcap_filter_add() and ocelot_vcap_filter_del() are not symmetric, because ocelot_vcap_filter_add() works with a preallocated and prepopulated filter and programs it to hardware, and ocelot_vcap_filter_del() does both the job of removing the specified filter from hardware, as well as kfreeing it. That is to say, the only option of editing a filter in place, which is to delete it, modify the structure and add it back, does not work because it results in use-after-free. This patch introduces ocelot_vcap_filter_replace, which trivially reprograms a VCAP entry to hardware, at the exact same index at which it existed before, without modifying any list or allocating any memory. Signed-off-by: Vladimir Oltean Acked-by: Richard Cochran Signed-off-by: Jakub Kicinski

Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-11-04T00:00:52Z

Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2021-11-02T13:20:58Z

Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...

Merge tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-11-01T20:44:55Z

Pull timer updates from Thomas Gleixner: "Time, timers and timekeeping updates: - No core updates - No new clocksource/event driver - A large rework of the ARM architected timer driver to prepare for the support of the upcoming ARMv8.6 support - Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers - Address a namespace collison in the ARC sp804 timer driver" * tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Select TIMER_OF clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM clocksource/drivers/arch_arm_timer: Move workaround synchronisation around clocksource/drivers/arm_arch_timer: Fix masking for high freq counters clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64 clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses clocksource/drivers/arc_timer: Eliminate redefined macro error

net: mscc: ocelot: serialize access to the MAC table

2021-10-25T11:59:41Z

DSA would like to remove the rtnl_lock from its SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE handlers, and the felix driver uses the same MAC table functions as ocelot. This means that the MAC table functions will no longer be implicitly serialized with respect to each other by the rtnl_mutex, we need to add a dedicated lock in ocelot for the non-atomic operations of selecting a MAC table row, reading/writing what we want and polling for completion. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Revert "Merge branch 'dsa-rtnl'"

2021-10-25T11:59:25Z

This reverts commit 965e6b262f48257dbdb51b565ecfd84877a0ab5f, reversing changes made to 4d98bb0d7ec2d0b417df6207b0bafe1868bad9f8.

net: mscc: ocelot: serialize access to the MAC table

2021-10-24T12:47:44Z

net: mscc: ocelot: track the port pvid using a pointer

2021-10-21T11:14:29Z

Now that we have a list of struct ocelot_bridge_vlan entries, we can rewrite the pvid logic to simply point to one of those structures, instead of having a separate structure with a "bool valid". The NULL pointer will represent the lack of a bridge pvid (not to be confused with the lack of a hardware pvid on the port, that is present at all times). Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: allow a config where all bridge VLANs are egress-untagged

2021-10-21T11:14:29Z

At present, the ocelot driver accepts a single egress-untagged bridge VLAN, meaning that this sequence of operations: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 bridge vlan add dev swp0 vid 2 pvid untagged fails because the bridge automatically installs VID 1 as a pvid & untagged VLAN, and vid 2 would be the second untagged VLAN on this port. It is necessary to delete VID 1 before proceeding to add VID 2. This limitation comes from the fact that we operate the port tag, when it has an egress-untagged VID, in the OCELOT_PORT_TAG_NATIVE mode. The ocelot switches do not have full flexibility and can either have one single VID as egress-untagged, or all of them. There are use cases for having all VLANs as egress-untagged as well, and this patch adds support for that. The change rewrites ocelot_port_set_native_vlan() into a more generic ocelot_port_manage_port_tag() function. Because the software bridge's state, transmitted to us via switchdev, can become very complex, we don't attempt to track all possible state transitions, but instead take a more declarative approach and just make ocelot_port_manage_port_tag() figure out which more to operate in: - port is VLAN-unaware: the classified VLAN (internal, unrelated to the 802.1Q header) is not inserted into packets on egress - port is VLAN-aware: - port has tagged VLANs: -> port has no untagged VLAN: set up as pure trunk -> port has one untagged VLAN: set up as trunk port + native VLAN -> port has more than one untagged VLAN: this is an invalid config which is rejected by ocelot_vlan_prepare - port has no tagged VLANs -> set up as pure egress-untagged port We don't keep the number of tagged and untagged VLANs, we just count the structures we keep. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: convert the VLAN masks to a list

2021-10-21T11:14:29Z

First and foremost, the driver currently allocates a constant sized 4K * u32 (16KB memory) array for the VLAN masks. However, a typical application might not need so many VLANs, so if we dynamically allocate the memory as needed, we might actually save some space. Secondly, we'll need to keep more advanced bookkeeping of the VLANs we have, notably we'll have to check how many untagged and how many tagged VLANs we have. This will have to stay in a structure, and allocating another 16 KB array for that is again a bit too much. So refactor the bridge VLANs in a linked list of structures. The hook points inside the driver are ocelot_vlan_member_add() and ocelot_vlan_member_del(), which previously used to operate on the ocelot->vlan_mask[vid] array element. ocelot_vlan_member_add() and ocelot_vlan_member_del() used to call ocelot_vlan_member_set() to commit to the ocelot->vlan_mask. Additionally, we had two calls to ocelot_vlan_member_set() from outside those callers, and those were directly from ocelot_vlan_init(). Those calls do not set up bridging service VLANs, instead they: - clear the VLAN table on reset - set the port pvid to the value used by this driver for VLAN-unaware standalone port operation (VID 0) So now, when we have a structure which represents actual bridge VLANs, VID 0 doesn't belong in that structure, since it is not part of the bridging layer. So delete the middle man, ocelot_vlan_member_set(), and let ocelot_vlan_init() call directly ocelot_vlant_set_mask() which forgoes any data structure and writes directly to hardware, which is all that we need. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller