user/sven/linux.git/include/soc, branch v5.4.130

irqchip/eznps: Fix build error for !ARC700 builds

2020-09-17T11:47:47Z

[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ] eznps driver is supposed to be platform independent however it ends up including stuff from inside arch/arc headers leading to rand config build errors. The quick hack to fix this (proper fix is too much chrun for non active user-base) is to add following to nps platform agnostic header. - copy AUX_IENABLE from arch/arc header - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/** Reported-by: kernel test robot Reported-by: Sebastian Andrzej Siewior Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin

Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2019-09-18T18:14:31Z

Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...

Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next

2019-09-11T10:39:19Z

Merge tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next

2019-09-03T19:47:37Z

Georgi writes: interconnect patches for 5.4 Here are the interconnect driver updates for the 5.4-rc1 merge window. - New feature is the path tagging support that helps with grouping and aggregating the bandwidth requests into separate buckets based on a tag. - The first user of the path tagging is the Qualcomm sdm845 driver that now implements support for wake/sleep sets. This allows consumer drivers to express their bandwidth needs for the different CPU power states. - New interconnect driver for the qcs404 platforms and a driver that communicates bandwidth requests with remote processor over shared memory. - Cleanups and fixes. Signed-off-by: Georgi Djakov * tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux: drivers: qcom: Add BCM vote macro to header interconnect: qcom: remove COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404 interconnect: qcom: Add QCS404 interconnect provider driver interconnect: qcom: Add interconnect RPM over SMD driver dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings interconnect: qcom: Add tagging and wake/sleep support for sdm845 interconnect: Add pre_aggregate() callback interconnect: Add support for path tags

iommu/mediatek: Clean up struct mtk_smi_iommu

2019-08-30T13:57:27Z

Remove the "struct mtk_smi_iommu" to simplify the code since it has only one item in it right now. Signed-off-by: Yong Wu Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

memory: mtk-smi: Get rid of need_larbid

2019-08-30T13:57:27Z

The "mediatek,larb-id" has already been parsed in MTK IOMMU driver. It's no need to parse it again in SMI driver. Only clean some codes. This patch is fit for all the current mt2701, mt2712, mt7623, mt8173 and mt8183. After this patch, the "mediatek,larb-id" only be needed for mt2712 which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U in which the larbs in the "mediatek,larbs" always are ordered. Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also be deleted. CC: Matthias Brugger Signed-off-by: Yong Wu Reviewed-by: Evan Green Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

Merge tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

2019-08-27T17:50:27Z

Pull ARC updates from Vineet Gupta: - support for Edge Triggered IRQs in ARC IDU intc - other fixes here and there * tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: prefer __section from compiler_attributes.h dt-bindings: IDU-intc: Add support for edge-triggered interrupts dt-bindings: IDU-intc: Clean up documentation ARCv2: IDU-intc: Add support for edge-triggered interrupts ARC: unwind: Mark expected switch fall-throughs ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations ARC: fix typo in setup_dma_ops log message ARCv2: entry: early return from exception need not clear U & DE bits

ARCv2: IDU-intc: Add support for edge-triggered interrupts

2019-08-26T17:04:59Z

This adds support for an optional extra interrupt cell to specify edge vs level triggered. It is backward compatible with dts files with only one cell, and will default to level-triggered in such a case. Note that I had to make a change to idu_irq_set_affinity as well, as this function was setting the interrupt type to "level" unconditionally, since this was the only type supported previously. Signed-off-by: Mischa Jonker Reviewed-by: Vineet Gupta Signed-off-by: Vineet Gupta

drivers: qcom: Add BCM vote macro to header

2019-08-20T07:09:56Z

The macro to generate a Bus Controller Manager (BCM) TCS command is used by the interconnect driver but might also be interesting to other drivers that need to construct TCS commands for sub processors so move it out of the sdm845 specific file and into the header. Signed-off-by: Jordan Crouse Acked-by: Stephen Boyd Acked-by: Bjorn Andersson Signed-off-by: Georgi Djakov

Merge branch 'pdf_fixes_v1' of https://git.linuxtv.org/mchehab/experimental into mauro

2019-07-22T19:51:20Z

Bring in a set of post-thrashup fixes from Mauro.