user/sven/linux.git/include/soc, branch v6.1.40

net: mscc: ocelot: don't keep PTP configuration of all ports in single structure

2023-07-19T14:22:01Z

[ Upstream commit 45d0fcb5bc9558d0bf3d2fa7fabc5d8a88d35439 ] In a future change, the driver will need to determine whether PTP RX timestamping is enabled on a port (including whether traps were set up on that port in particular) and that is currently not possible. The driver supports different RX filters (L2, L4) and kinds of TX timestamping (one-step, two-step) on its ports, but it saves all configuration in a single struct hwtstamp_config that is global to the switch. So, the latest timestamping configuration on one port (including a request to disable timestamping) affects what gets reported for all ports, even though the configuration itself is still individual to each port. The port timestamping configurations are only coupled because of the common structure, so replace the hwtstamp_config with a mask of trapped protocols saved per port. We also have the ptp_cmd to distinguish between one-step and two-step PTP timestamping, so with those 2 bits of information we can fully reconstruct a descriptive struct hwtstamp_config for each port, during the SIOCGHWTSTAMP ioctl. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets") Signed-off-by: Vladimir Oltean Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

ARM: at91: pm: avoid soft resetting AC DLL

2022-11-01T10:25:19Z

Do not soft reset AC DLL as controller is buggy and this operation my introduce glitches in the controller leading to undefined behavior. Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5") Depends-on: a02875c4cbd6 ("ARM: at91: pm: fix self-refresh for sama7g5") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20221026124114.985876-2-claudiu.beznea@microchip.com

Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2022-10-14T18:21:11Z

Pull more RISC-V updates from Palmer Dabbelt: - DT updates for the PolarFire SOC - a fix to correct the handling of write-only mappings - m{vetndor,arcd,imp}id is now in /proc/cpuinfo - the SiFive L2 cache controller support has been refactored to also support L3 caches - misc fixes, cleanups and improvements throughout the tree * tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) MAINTAINERS: add RISC-V's patchwork RISC-V: Make port I/O string accessors actually work riscv: enable software resend of irqs RISC-V: Re-enable counter access from userspace riscv: vdso: fix NULL deference in vdso_join_timens() when vfork riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache riscv: check for kernel config option in t-head memory types errata riscv: use BIT() marco for cpufeature probing riscv: use BIT() macros in t-head errata init riscv: drop some idefs from CMO initialization riscv: cleanup svpbmt cpufeature probing riscv: Pass -mno-relax only on lld < 15.0.0 RISC-V: Avoid dereferening NULL regs in die() dt-bindings: riscv: add new riscv,isa strings for emulators ...

Merge patch series "Use composable cache instead of L2 cache"

2022-10-13T18:07:13Z

Zong Li says: Since composable cache may be L3 cache if private L2 cache exists, we should use its original name "composable cache" to prevent confusion. This patchset contains the modification which is related to ccache, such as DT binding and EDAC driver. * b4-shazam-merge: riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache Link: https://lore.kernel.org/r/20220913061817.22564-1-zong.li@sifive.com Signed-off-by: Palmer Dabbelt

soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.

2022-10-13T18:06:51Z

Since composable cache may be L3 cache if there is a L2 cache, we should use its original name composable cache to prevent confusion. There are some new lines were generated due to adding the compatible "sifive,ccache0" into ID table and indent requirement. The sifive L2 has been renamed to sifive CCACHE, EDAC driver needs to apply the change as well. Signed-off-by: Greentime Hu Signed-off-by: Zong Li Co-developed-by: Zong Li Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20220913061817.22564-3-zong.li@sifive.com Signed-off-by: Palmer Dabbelt

Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-10-11T17:59:59Z

Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2022-10-08T17:06:48Z

Pull clk updates from Stephen Boyd: "We have some late breaking reports that a patch series to rework clk rate range support broke boot on some devices, so I've left that branch out of this. Hopefully we can get to that next week, or punt on it and let it bake another cycle. That means we don't really have any changes to the core framework this time around besides a few typo fixes. Instead this is all clk driver updates and fixes. The usual suspects are here (again), with Qualcomm dominating the diffstat. We look to have gained support for quite a few new Qualcomm SoCs and Dmitry worked on updating many of the existing Qualcomm drivers to use clk_parent_data. After that we have MediaTek drivers getting some much needed updates, in particular to support GPU DVFS. There are also quite a few Samsung clk driver patches, but that's mostly because there was a maintainer change and so last release we missed some of those patches. Overall things look normal, but I'm slowly reviewing core framework code nowadays and that shows given the rate range patches had to be yanked last minute. Let's hope this situation changes soon. New Drivers: - Support for Renesas VersaClock7 clock generator family - Add Spreadtrum UMS512 SoC clk support - New clock drivers for MediaTek Helio X10 MT6795 - Display clks for Qualcomm SM6115, SM8450 - GPU clks for Qualcomm SC8280XP - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers Deleted Drivers: - Remove DaVinci DM644x and DM646x clk driver support Updates: - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - More devm helpers for fixed rate registration - Various PXA168 clk driver fixes - Add resets for MediaTek MT8195 PCIe and USB - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging - Add missing DPI1_HDMI clock in MT8195 VDOSYS1 - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195 - Fix GPU clock topology on MT8195 - Propogate rate changes from GPU clock gate up the tree - Clock mux notifiers for GPU-related PLLs - Conversion of more "simple" drivers to mtk_clk_simple_probe() - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek - Shrink MT8192 clock driver by deduplicating clock parent lists - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk' clocks for i.MX8MP - Drop unnecessary newline in i.MX8MM dt-bindings - Add more MU1 and SAI clocks dt-bindings Ids - Introduce slice busy bit check for i.MX93 composite clock - Introduce white list bit check for i.MX93 composite clock - Add new i.MX93 clock gate - Add MU1 and MU2 clocks to i.MX93 clock provider - Add SAI IPG clocks to i.MX93 clock provider - add generic clocks for U(S)ART available on SAMA5D2 SoCs - reset controller support for Polarfire clocks - .round_rate and .set rate support for clk-mpfs - code cleanup for clk-mpfs - PLL support for PolarFire SoC's Clock Conditioning Circuitry - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8 - Add I2C clocks and resets on RZ/V2M - Document clock support for the RZ/Five SoC - mux-variant clock using the table variant to select parents - clock controller for the rv1126 soc - conversion of rk3128 to yaml and relicensing of the yaml bindings to gpl2+MIT (following dt-binding guildelines) - Exynos7885: add FSYS, TREX and MFC clock controllers - Exynos850: add IS and AUD (audio) clock controllers with bindings - ExynosAutov9: add FSYS clock controllers with bindings - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers - ExynosAutov9: add few missing Peric 0/1 gates - ExynosAutov9: correct register offsets of few Peric 0/1 clocks - Minor code improvements (use of_device_get_match_data() helper, code style) - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration - Qualcomm SDM660 SDCC1 moved to floor clk ops - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was added/fixed - The Qualcomm MSM8996 CPU clocks are updated with support for ACD - Support for Qualcomm SDM670 GCC and RPMh clks was added - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for many Qualcomm SoCs - Support for per-reset defined delay on Qualcomm was introduced" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: ast2600: BCLK comes from EPLL clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: nxp: fix typo in comment clk: pxa: add a check for the return value of kzalloc() clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: imx: scu: fix memleak on platform_device_add() fails clk: vc5: Use regmap_{set,clear}_bits() where appropriate ...

Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-10-06T18:04:57Z

Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...

Merge branches 'clk-rockchip', 'clk-renesas', 'clk-microchip', 'clk-allwinner' and 'clk-imx' into clk-next

2022-10-04T17:54:02Z

* clk-rockchip: dt-bindings: clock: rockchip: change SPDX-License-Identifier dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML clk: rockchip: Add clock controller support for RV1126 SoC dt-bindings: clock: rockchip: Document RV1126 CRU clk: rockchip: Add dt-binding header for RV1126 clk: rockchip: Add MUXTBL variant * clk-renesas: clk: renesas: r8a779g0: Add EtherAVB clocks clk: renesas: r8a779g0: Add PFC/GPIO clocks clk: renesas: r8a779g0: Add I2C clocks clk: renesas: r8a779g0: Add watchdog clock dt-bindings: clock: renesas,rzg2l: Document RZ/Five SoC clk: renesas: r8a779f0: Add MSIOF clocks clk: renesas: r9a09g011: Add IIC clock and reset entries clk: renesas: r9a07g044: Add conditional compilation for r9a07g044_cpg_info clk: renesas: r8a779f0: Add TMU and parent SASYNC clocks clk: renesas: r8a779f0: Add CMT clocks clk: renesas: r8a779f0: Add SDH0 clock * clk-microchip: clk: at91: sama5d2: Add Generic Clocks for UART/USART clk: microchip: add PolarFire SoC fabric clock support dt-bindings: clk: add PolarFire SoC fabric clock ids dt-bindings: clk: document PolarFire SoC fabric clocks dt-bindings: clk: rename mpfs-clkcfg binding clk: microchip: mpfs: update module authorship & licencing clk: microchip: mpfs: convert periph_clk to clk_gate clk: microchip: mpfs: convert cfg_clk to clk_divider clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo() clk: microchip: mpfs: simplify control reg access clk: microchip: mpfs: move id & offset out of clock structs clk: microchip: mpfs: add MSS pll's set & round rate MAINTAINERS: add polarfire soc reset controller reset: add polarfire soc reset support clk: microchip: mpfs: add reset controller dt-bindings: clk: microchip: mpfs: add reset controller support clk: microchip: mpfs: make the rtc's ahb clock critical clk: microchip: mpfs: fix clk_cfg array bounds violation * clk-allwinner: clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helper clk: sunxi-ng: sun8i-de2: Use dev_err_probe() helper clk: sunxi-ng: d1: Limit PLL rates to stable ranges * clk-imx: clk: imx: scu: fix memleak on platform_device_add() fails clk: imx93: add SAI IPG clk clk: imx93: add MU1/2 clock clk: imx93: switch to use new clk gate API clk: imx: add i.MX93 clk gate clk: imx: clk-composite-93: check white_list clk: imx: clk-composite-93: check slice busy dt-bindings: clock: imx93-clock: add more MU/SAI clocks dt-bindings: clock: imx8mm: don't use multiple blank lines clk: imx8mp: tune the order of enet_qos_root_clk

Merge tag 'tegra-for-6.1-cbb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

2022-09-23T16:04:29Z

soc/tegra: cbb: Changes for v6.1-rc1 This introduces the CBB driver that is used to provide (a lot of) information about SErrors when things go wrong, instead of the kernel just crashing or hanging. * tag 'tegra-for-6.1-cbb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: cbb: Add support for Tegra241 (Grace) soc/tegra: cbb: Add driver for Tegra234 CBB 2.0 soc/tegra: cbb: Add CBB 1.0 driver for Tegra194 soc/tegra: Set ERD bit to mask inband errors Link: https://lore.kernel.org/r/20220916101957.1635854-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann