user/sven/linux.git/include/target, branch v3.14.42

target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling

2015-05-06T19:59:17Z

commit c8e639852ad720499912acedfd6b072325fd2807 upstream. This patch fixes a bug for COMPARE_AND_WRITE handling with fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC. It adds the missing allocation for cmd->t_bidi_data_sg within transport_generic_new_cmd() that is used by COMPARE_AND_WRITE for the initial READ payload, even if the fabric is already providing a pre-allocated buffer for cmd->t_data_sg. Also, fix zero-length COMPARE_AND_WRITE handling within the compare_and_write_callback() and target_complete_ok_work() to queue the response, skipping the initial READ. This fixes COMPARE_AND_WRITE emulation with loopback, vhost, and xen-backend fabric drivers using SG_TO_MEM_NOALLOC. Reported-by: Christoph Hellwig Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Fix PR_APTPL_BUF_LEN buffer size limitation

2015-03-18T12:31:24Z

commit f161d4b44d7cc1dc66b53365215227db356378b1 upstream. This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation for write-out of PR APTPL metadata that Martin has recently been running into. It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed memory instead of kzalloc, and increases the default hardcoded length to 256k. It also adds logic in core_scsi3_update_and_write_aptpl() to double the original length upon core_scsi3_update_aptpl_buf() failure, and retries until the vzalloc'ed buffer is large enough to accommodate the outgoing APTPL metadata. Reported-by: Martin Svec Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Report correct response length for some commands

2014-07-01T03:12:00Z

commit 2426bd456a61407388b6e61fc5f98dbcbebc50e2 upstream. When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier Tested-by: Christophe Vu-Brugier Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

Target/iscsi: Fix sendtargets response pdu for iser transport

2014-07-01T03:12:00Z

commit 22c7aaa57e80853b4904a46c18f97db0036a3b97 upstream. In case the transport is iser we should not include the iscsi target info in the sendtargets text response pdu. This causes sendtargets response to include the target info twice. Modify iscsit_build_sendtargets_response to filter transport types that don't match. Signed-off-by: Sagi Grimberg Reported-by: Slava Shwartsman Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iscsi/iser-target: Fix isert_conn->state hung shutdown issues

2014-03-05T01:54:09Z

This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg Cc: Or Gerlitz Cc: #3.10+ Signed-off-by: Nicholas Bellinger

target: Simplify command completion by removing CMD_T_FAILED flag

2014-02-12T23:14:30Z

The CMD_T_FAILED flag is set used in one place to record the result of a trivial test, and it is only tested once, few lines later. We might as well make the code simpler and easier to read by directly doing the test of "success" where we want to use it. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-01-31T23:31:23Z

Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...

target: Fix percpu_ref_put race in transport_lun_remove_cmd

2014-01-30T11:58:34Z

This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel Cc: Tommy Apel Cc: #3.13+ Signed-off-by: Nicholas Bellinger

target: Report bad sector in sense data for DIF errors

2014-01-25T06:58:53Z

SPC-4 states that data-integrity errors shall also report the failed sector in CHECK_CONDITION response sense data information field. Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger

iscsi-target: Convert gfp_t parameter to task state bitmask

2014-01-25T06:58:52Z

This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger