user/sven/linux.git/include/target, branch v3.16.58

target/iscsi: Fix iSCSI task reassignment handling

2018-02-13T18:42:18Z

commit 59b6986dbfcdab96a971f9663221849de79a7556 upstream. Allocate a task management request structure for all task management requests, including task reassignment. This change avoids that the se_tmr->response assignment dereferences an uninitialized se_tmr pointer. Reported-by: Moshe David Signed-off-by: Bart Van Assche Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Cc: Moshe David Signed-off-by: Nicholas Bellinger [bwh: Backported to 3.16: - Add definition of TMR_UNKNOWN - Adjust context] Signed-off-by: Ben Hutchings

target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK

2018-02-13T18:42:18Z

commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream. This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White Cc: Donald White Cc: Mike Christie Cc: Hannes Reinecke Signed-off-by: Nicholas Bellinger [bwh: Backported to 3.16: - Use target_core_fabric_ops::get_task_tag to get the tag and %u to format it - Adjust context] Signed-off-by: Ben Hutchings

target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE

2017-02-23T03:54:18Z

commit 449a137846c84829a328757cd21fd9ca65c08519 upstream. This patch addresses a bug where EXTENDED_COPY across multiple LUNs results in a CHECK_CONDITION when the source + destination are not located on the same physical node. ESX Host environments expect sense COPY_ABORTED w/ COPY TARGET DEVICE NOT REACHABLE to be returned when this occurs, in order to signal fallback to local copy method. As described in section 6.3.3 of spc4r22: "If it is not possible to complete processing of a segment because the copy manager is unable to establish communications with a copy target device, because the copy target device does not respond to INQUIRY, or because the data returned in response to INQUIRY indicates an unsupported logical unit, then the EXTENDED COPY command shall be terminated with CHECK CONDITION status, with the sense key set to COPY ABORTED, and the additional sense code set to COPY TARGET DEVICE NOT REACHABLE." Tested on v4.1.y with ESX v5.5u2+ with BlockCopy across multiple nodes. Reported-by: Nixon Vincent Tested-by: Nixon Vincent Cc: Nixon Vincent Tested-by: Dinesh Israni Signed-off-by: Dinesh Israni Cc: Dinesh Israni Signed-off-by: Nicholas Bellinger [bwh: Backported to 3.16: generate the sense data in transport_send_check_condition_and_sense() rather than adding to sense_info_table] Signed-off-by: Ben Hutchings

target: Fix max_unmap_lba_count calc overflow

2016-11-20T01:16:55Z

commit ea263c7fada4af8ec7fe5fcfd6e7d7705a89351b upstream. max_discard_sectors only 32bits, and some non scsi backend devices will set this to the max 0xffffffff, so we can end up overflowing during the max_unmap_lba_count calculation. This fixes a regression caused by my patch: commit 8a9ebe717a133ba7bc90b06047f43cc6b8bcb8b3 Author: Mike Christie Date: Mon Jan 18 14:09:27 2016 -0600 target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors which can result in extra discards being sent to due the overflow causing max_unmap_lba_count to be smaller than what the backing device can actually support. Signed-off-by: Mike Christie Reviewed-by: Bart Van Assche Signed-off-by: Nicholas Bellinger Signed-off-by: Ben Hutchings

target: Fix remote-port TMR ABORT + se_cmd fabric stop

2016-03-24T10:00:49Z

commit 0f4a943168f31d29a1701908931acaba518b131a upstream. To address the bug where fabric driver level shutdown of se_cmd occurs at the same time when TMR CMD_T_ABORTED is happening resulting in a -1 ->cmd_kref, this patch adds a CMD_T_FABRIC_STOP bit that is used to determine when TMR + driver I_T nexus shutdown is happening concurrently. It changes target_sess_cmd_list_set_waiting() to obtain se_cmd->cmd_kref + set CMD_T_FABRIC_STOP, and drop local reference in target_wait_for_sess_cmds() and invoke extra target_put_sess_cmd() during Task Aborted Status (TAS) when necessary. Also, it adds a new target_wait_free_cmd() wrapper around transport_wait_for_tasks() for the special case within transport_generic_free_cmd() to set CMD_T_FABRIC_STOP, and is now aware of CMD_T_ABORTED + CMD_T_TAS status bits to know when an extra transport_put_cmd() during TAS is required. Note transport_generic_free_cmd() is expected to block on cmd->cmd_wait_comp in order to follow what iscsi-target expects during iscsi_conn context se_cmd shutdown. Cc: Quinn Tran Cc: Himanshu Madhani Cc: Sagi Grimberg Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Andy Grover Cc: Mike Christie Signed-off-by: Nicholas Bellinger [ luis: backported to 3.16: used Nicholas' backport to 3.14 ] Signed-off-by: Luis Henriques

target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors

2016-02-25T00:18:38Z

commit 8a9ebe717a133ba7bc90b06047f43cc6b8bcb8b3 upstream. In a couple places we are not converting to/from the Linux block layer 512 bytes sectors. 1. The request queue values and what we do are a mismatch of things: max_discard_sectors - This is in linux block layer 512 byte sectors. We are just copying this to max_unmap_lba_count. discard_granularity - This is in bytes. We are converting it to Linux block layer 512 byte sectors. discard_alignment - This is in bytes. We are just copying this over. The problem is that the core LIO code exports these values in spc_emulate_evpd_b0 and we use them to test request arguments in sbc_execute_unmap, but we never convert to the block size we export to the initiator. If we are not using 512 byte sectors then we are exporting the wrong values or are checks are off. And, for the discard_alignment/bytes case we are just plain messed up. 2. blkdev_issue_discard's start and number of sector arguments are supposed to be in linux block layer 512 byte sectors. We are currently passing in the values we get from the initiator which might be based on some other sector size. There is a similar problem in iblock_execute_write_same where the bio functions want values in 512 byte sectors but we are passing in what we got from the initiator. Signed-off-by: Mike Christie Signed-off-by: Nicholas Bellinger [ luis: backported to 3.16: - dropped changes to attribute unmap_zeroes_data as 3.16 doesn't support LBPRZ - functions rename: * fd_execute_unmap -> fd_do_unmap * iblock_execute_unmap -> iblock_do_unmap - adjusted context ] Signed-off-by: Luis Henriques

target: Fix race for SCF_COMPARE_AND_WRITE_POST checking

2015-12-18T16:06:38Z

commit 057085e522f8bf94c2e691a5b76880f68060f8ba upstream. This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg Signed-off-by: Nicholas Bellinger [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques

target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling

2015-05-06T09:24:23Z

commit c8e639852ad720499912acedfd6b072325fd2807 upstream. This patch fixes a bug for COMPARE_AND_WRITE handling with fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC. It adds the missing allocation for cmd->t_bidi_data_sg within transport_generic_new_cmd() that is used by COMPARE_AND_WRITE for the initial READ payload, even if the fabric is already providing a pre-allocated buffer for cmd->t_data_sg. Also, fix zero-length COMPARE_AND_WRITE handling within the compare_and_write_callback() and target_complete_ok_work() to queue the response, skipping the initial READ. This fixes COMPARE_AND_WRITE emulation with loopback, vhost, and xen-backend fabric drivers using SG_TO_MEM_NOALLOC. Reported-by: Christoph Hellwig Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger Signed-off-by: Luis Henriques

target: Fix PR_APTPL_BUF_LEN buffer size limitation

2015-03-02T13:17:18Z

commit f161d4b44d7cc1dc66b53365215227db356378b1 upstream. This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation for write-out of PR APTPL metadata that Martin has recently been running into. It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed memory instead of kzalloc, and increases the default hardcoded length to 256k. It also adds logic in core_scsi3_update_and_write_aptpl() to double the original length upon core_scsi3_update_aptpl_buf() failure, and retries until the vzalloc'ed buffer is large enough to accommodate the outgoing APTPL metadata. Reported-by: Martin Svec Signed-off-by: Nicholas Bellinger Signed-off-by: Luis Henriques

target: Report correct response length for some commands

2014-06-11T19:15:30Z

When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier Tested-by: Christophe Vu-Brugier Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger