user/sven/linux.git/include/target, branch v4.4.184

target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK

2018-01-17T08:35:31Z

commit 1c21a48055a67ceb693e9c2587824a8de60a217c upstream. This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White Cc: Donald White Cc: Mike Christie Cc: Hannes Reinecke Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: fix ALUA transition timeout handling

2017-12-20T09:04:57Z

[ Upstream commit d7175373f2745ed4abe5b388d5aabd06304f801e ] The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: Mike Christie Signed-off-by: Nicholas Bellinger Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

target/iscsi: Fix iSCSI task reassignment handling

2017-11-18T10:11:07Z

commit 59b6986dbfcdab96a971f9663221849de79a7556 upstream. Allocate a task management request structure for all task management requests, including task reassignment. This change avoids that the se_tmr->response assignment dereferences an uninitialized se_tmr pointer. Reported-by: Moshe David Signed-off-by: Bart Van Assche Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Cc: Moshe David Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix iscsi_np reset hung task during parallel delete

2017-08-16T20:40:28Z

commit 978d13d60c34818a41fc35962602bdfa5c03f214 upstream. This patch fixes a bug associated with iscsit_reset_np_thread() that can occur during parallel configfs rmdir of a single iscsi_np used across multiple iscsi-target instances, that would result in hung task(s) similar to below where configfs rmdir process context was blocked indefinately waiting for iscsi_np->np_restart_comp to finish: [ 6726.112076] INFO: task dcp_proxy_node_:15550 blocked for more than 120 seconds. [ 6726.119440] Tainted: G W O 4.1.26-3321 #2 [ 6726.125045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 6726.132927] dcp_proxy_node_ D ffff8803f202bc88 0 15550 1 0x00000000 [ 6726.140058] ffff8803f202bc88 ffff88085c64d960 ffff88083b3b1ad0 ffff88087fffeb08 [ 6726.147593] ffff8803f202c000 7fffffffffffffff ffff88083f459c28 ffff88083b3b1ad0 [ 6726.155132] ffff88035373c100 ffff8803f202bca8 ffffffff8168ced2 ffff8803f202bcb8 [ 6726.162667] Call Trace: [ 6726.165150] [] schedule+0x32/0x80 [ 6726.170156] [] schedule_timeout+0x214/0x290 [ 6726.176030] [] ? __send_signal+0x52/0x4a0 [ 6726.181728] [] wait_for_completion+0x96/0x100 [ 6726.187774] [] ? wake_up_state+0x10/0x10 [ 6726.193395] [] iscsit_reset_np_thread+0x62/0xe0 [iscsi_target_mod] [ 6726.201278] [] iscsit_tpg_disable_portal_group+0x96/0x190 [iscsi_target_mod] [ 6726.210033] [] lio_target_tpg_store_enable+0x4f/0xc0 [iscsi_target_mod] [ 6726.218351] [] configfs_write_file+0xaa/0x110 [ 6726.224392] [] vfs_write+0xa4/0x1b0 [ 6726.229576] [] SyS_write+0x41/0xb0 [ 6726.234659] [] system_call_fastpath+0x12/0x71 It would happen because each iscsit_reset_np_thread() sets state to ISCSI_NP_THREAD_RESET, sends SIGINT, and then blocks waiting for completion on iscsi_np->np_restart_comp. However, if iscsi_np was active processing a login request and more than a single iscsit_reset_np_thread() caller to the same iscsi_np was blocked on iscsi_np->np_restart_comp, iscsi_np kthread process context in __iscsi_target_login_thread() would flush pending signals and only perform a single completion of np->np_restart_comp before going back to sleep within transport specific iscsit_transport->iscsi_accept_np code. To address this bug, add a iscsi_np->np_reset_count and update __iscsi_target_login_thread() to keep completing np->np_restart_comp until ->np_reset_count has reached zero. Reported-by: Gary Guo Tested-by: Gary Guo Cc: Mike Christie Cc: Hannes Reinecke Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iscsi-target: Fix initial login PDU asynchronous socket close OOPs

2017-08-11T16:08:49Z

commit 25cdda95fda78d22d44157da15aa7ea34be3c804 upstream. This patch fixes a OOPs originally introduced by: commit bb048357dad6d604520c91586334c9c230366a14 Author: Nicholas Bellinger Date: Thu Sep 5 14:54:04 2013 -0700 iscsi-target: Add sk->sk_state_change to cleanup after TCP failure which would trigger a NULL pointer dereference when a TCP connection was closed asynchronously via iscsi_target_sk_state_change(), but only when the initial PDU processing in iscsi_target_do_login() from iscsi_np process context was blocked waiting for backend I/O to complete. To address this issue, this patch makes the following changes. First, it introduces some common helper functions used for checking socket closing state, checking login_flags, and atomically checking socket closing state + setting login_flags. Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP connection has dropped via iscsi_target_sk_state_change(), but the initial PDU processing within iscsi_target_do_login() in iscsi_np context is still running. For this case, it sets LOGIN_FLAGS_CLOSED, but doesn't invoke schedule_delayed_work(). The original NULL pointer dereference case reported by MNC is now handled by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before transitioning to FFP to determine when the socket has already closed, or iscsi_target_start_negotiation() if the login needs to exchange more PDUs (eg: iscsi_target_do_login returned 0) but the socket has closed. For both of these cases, the cleanup up of remaining connection resources will occur in iscsi_target_start_negotiation() from iscsi_np process context once the failure is detected. Finally, to handle to case where iscsi_target_sk_state_change() is called after the initial PDU procesing is complete, it now invokes conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once existing iscsi_target_sk_check_close() checks detect connection failure. For this case, the cleanup of remaining connection resources will occur in iscsi_target_do_login_rx() from delayed workqueue process context once the failure is detected. Reported-by: Mike Christie Reviewed-by: Mike Christie Tested-by: Mike Christie Cc: Mike Christie Reported-by: Hannes Reinecke Cc: Hannes Reinecke Cc: Sagi Grimberg Cc: Varun Prakash Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Avoid mappedlun symlink creation during lun shutdown

2017-08-11T16:08:49Z

commit 49cb77e297dc611a1b795cfeb79452b3002bd331 upstream. This patch closes a race between se_lun deletion during configfs unlink in target_fabric_port_unlink() -> core_dev_del_lun() -> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks waiting for percpu_ref RCU grace period to finish, but a new NodeACL mappedlun is added before the RCU grace period has completed. This can happen in target_fabric_mappedlun_link() because it only checks for se_lun->lun_se_dev, which is not cleared until after transport_clear_lun_ref() percpu_ref RCU grace period finishes. This bug originally manifested as NULL pointer dereference OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on v4.1.y code, because it dereferences lun->lun_se_dev without a explicit NULL pointer check. In post v4.1 code with target-core RCU conversion, the code in target_stat_scsi_att_intr_port_show_attr_dev() no longer uses se_lun->lun_se_dev, but the same race still exists. To address the bug, go ahead and set se_lun>lun_shutdown as early as possible in core_tpg_remove_lun(), and ensure new NodeACL mappedlun creation in target_fabric_mappedlun_link() fails during se_lun shutdown. Reported-by: James Shen Cc: James Shen Tested-by: James Shen Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iscsi-target: Add login_keys_workaround attribute for non RFC initiators

2017-07-27T22:06:04Z

commit 138d351eefb727ab9e41a3dc5f112ceb4f6e59f2 upstream. This patch re-introduces part of a long standing login workaround that was recently dropped by: commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46 Author: Nicholas Bellinger Date: Sun Apr 2 13:36:44 2017 -0700 iscsi-target: Drop work-around for legacy GlobalSAN initiator Namely, the workaround for FirstBurstLength ended up being required by Mellanox Flexboot PXE boot ROMs as reported by Robert. So this patch re-adds the work-around for FirstBurstLength within iscsi_check_proposer_for_optional_reply(), and makes the key optional to respond when the initiator does not propose, nor respond to it. Also as requested by Arun, this patch introduces a new TPG attribute named 'login_keys_workaround' that controls the use of both the FirstBurstLength workaround, as well as the two other existing workarounds for gPXE iSCSI boot client. By default, the workaround is enabled with login_keys_workaround=1, since Mellanox FlexBoot requires it, and Arun has verified the Qlogic MSFT initiator already proposes FirstBurstLength, so it's uneffected by this re-adding this part of the original work-around. Reported-by: Robert LeBlanc Cc: Robert LeBlanc Reviewed-by: Arun Easi Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Convert ACL change queue_depth se_session reference usage

2017-05-20T12:26:58Z

commit d36ad77f702356afb1009d2987b0ab55da4c7d57 upstream. This patch converts core_tpg_set_initiator_node_queue_depth() to use struct se_node_acl->acl_sess_list when performing explicit se_tpg_tfo->shutdown_session() for active sessions, in order for new se_node_acl->queue_depth to take effect. This follows how core_tpg_del_initiator_node_acl() currently works when invoking se_tpg_tfo->shutdown-session(), and ahead of the next patch to take se_node_acl->acl_kref during lookup, the extra get_initiator_node_acl() can go away. In order to achieve this, go ahead and change target_get_session() to use kref_get_unless_zero() and propigate up the return value to know when a session is already being released. This is because se_node_acl->acl_group is already protecting se_node_acl->acl_group reference via configfs, and shutdown within core_tpg_del_initiator_node_acl() won't occur until sys_write() to core_tpg_set_initiator_node_queue_depth() attribute returns back to user-space. Also, drop the left-over iscsi-target hack, and obtain se_portal_group->session_lock in lio_tpg_shutdown_session() internally. Remove iscsi-target wrapper and unused se_tpg + force parameters and associated code. Reported-by: Christoph Hellwig Cc: Sagi Grimberg Cc: Hannes Reinecke Cc: Andy Grover Cc: Mike Christie Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Fix NULL dereference during LUN lookup + active I/O shutdown

2017-03-15T01:57:14Z

commit bd4e2d2907fa23a11d46217064ecf80470ddae10 upstream. When transport_clear_lun_ref() is shutting down a se_lun via configfs with new I/O in-flight, it's possible to trigger a NULL pointer dereference in transport_lookup_cmd_lun() due to the fact percpu_ref_get() doesn't do any __PERCPU_REF_DEAD checking before incrementing lun->lun_ref.count after lun->lun_ref has switched to atomic_t mode. This results in a NULL pointer dereference as LUN shutdown code in core_tpg_remove_lun() continues running after the existing ->release() -> core_tpg_lun_ref_release() callback completes, and clears the RCU protected se_lun->lun_se_dev pointer. During the OOPs, the state of lun->lun_ref in the process which triggered the NULL pointer dereference looks like the following on v4.1.y stable code: struct se_lun { lun_link_magic = 4294932337, lun_status = TRANSPORT_LUN_STATUS_FREE, ..... lun_se_dev = 0x0, lun_sep = 0x0, ..... lun_ref = { count = { counter = 1 }, percpu_count_ptr = 3, release = 0xffffffffa02fa1e0 , confirm_switch = 0x0, force_atomic = false, rcu = { next = 0xffff88154fa1a5d0, func = 0xffffffff8137c4c0 } } } To address this bug, use percpu_ref_tryget_live() to ensure once __PERCPU_REF_DEAD is visable on all CPUs and ->lun_ref has switched to atomic_t, all new I/Os will fail to obtain a new lun->lun_ref reference. Also use an explicit percpu_ref_kill_and_confirm() callback to block on ->lun_ref_comp to allow the first stage and associated RCU grace period to complete, and then block on ->lun_ref_shutdown waiting for the final percpu_ref_put() to drop the last reference via transport_lun_remove_cmd() before continuing with core_tpg_remove_lun() shutdown. Reported-by: Rob Millner Tested-by: Rob Millner Cc: Rob Millner Tested-by: Vaibhav Tandon Cc: Vaibhav Tandon Tested-by: Bryant G. Ly Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

target: Fix multi-session dynamic se_node_acl double free OOPs

2017-03-12T05:37:27Z

commit 01d4d673558985d9a118e1e05026633c3e2ade9b upstream. This patch addresses a long-standing bug with multi-session (eg: iscsi-target + iser-target) se_node_acl dynamic free withini transport_deregister_session(). This bug is caused when a storage endpoint is configured with demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1) initiators, and initiator login creates a new dynamic node acl and attaches two sessions to it. After that, demo-mode for the storage instance is disabled via configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and the existing dynamic acl is never converted to an explicit ACL. The end result is dynamic acl resources are released twice when the sessions are shutdown in transport_deregister_session(). If the storage instance is not changed to disable demo-mode, or the dynamic acl is converted to an explict ACL, or there is only a single session associated with the dynamic ACL, the bug is not triggered. To address this big, move the release of dynamic se_node_acl memory into target_complete_nacl() so it's only freed once when se_node_acl->acl_kref reaches zero. (Drop unnecessary list_del_init usage - HCH) Reported-by: Rob Millner Tested-by: Rob Millner Cc: Rob Millner Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman