user/sven/linux.git/include/trace/events/workqueue.h, branch v4.19.85

tracing: Add missing forward declaration

2018-04-19T15:05:48Z

Without this forward declaration compile may fail if this header is included only for registering other probe event without struct pool_workqueue. Link: http://lkml.kernel.org/r/20180416023626.139915-1-cwahbong@google.com Reviewed-by: Todd Poynor Signed-off-by: Ahbong Chang Signed-off-by: Steven Rostedt (VMware)

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

workqueue: rename cpu_workqueue to pool_workqueue

2013-02-14T03:29:12Z

workqueue has moved away from global_cwqs to worker_pools and with the scheduled custom worker pools, wforkqueues will be associated with pools which don't have anything to do with CPUs. The workqueue code went through significant amount of changes recently and mass renaming isn't likely to hurt much additionally. Let's replace 'cpu' with 'pool' so that it reflects the current design. * s/struct cpu_workqueue_struct/struct pool_workqueue/ * s/cpu_wq/pool_wq/ * s/cwq/pwq/ This patch is purely cosmetic. Signed-off-by: Tejun Heo

workqueue: move global_cwq->cpu to worker_pool

2013-01-24T19:01:33Z

Move gcwq->cpu to pool->cpu. This introduces a couple places where gcwq->pools[0].cpu is used. These will soon go away as gcwq is further reduced. This is part of an effort to remove global_cwq and make worker_pool the top level abstraction, which in turn will help implementing worker pools with user-specified attributes. Signed-off-by: Tejun Heo Reviewed-by: Lai Jiangshan

workqueue: factor out worker_pool from global_cwq

2012-07-12T21:46:37Z

Move worklist and all worker management fields from global_cwq into the new struct worker_pool. worker_pool points back to the containing gcwq. worker and cpu_workqueue_struct are updated to point to worker_pool instead of gcwq too. This change is mechanical and doesn't introduce any functional difference other than rearranging of fields and an added level of indirection in some places. This is to prepare for multiple pools per gcwq. v2: Comment typo fixes as suggested by Namhyung. Signed-off-by: Tejun Heo Cc: Namhyung Kim

workqueue: Fix workqueue_execute_end() comment

2012-04-10T08:49:47Z

workqueue_execute_end() is called after the callback function, not before. Signed-off-by: Stephen Boyd Acked-by: Tejun Heo Signed-off-by: Jiri Kosina

workqueue: add queue_work and activate_work trace points

2010-10-05T08:49:55Z

These two tracepoints allow tracking when and how a work is queued and activated. This patch is based on Frederic's patch to add queue_work trace point. Signed-off-by: Tejun Heo Cc: Frederic Weisbecker

workqueue: prepare for more tracepoints

2010-10-05T08:41:14Z

Define workqueue_work event class and use it for workqueue_execute_end trace point. Also, move trace/events/workqueue.h include downwards such that all struct definitions are visible to it. This is to prepare for more tracepoints and doesn't cause any functional change. Signed-off-by: Tejun Heo Cc: Frederic Weisbecker

workqueue: Add basic tracepoints to track workqueue execution

2010-08-21T20:19:37Z

With the introduction of the new unified work queue thread pools, we lost one feature: It's no longer possible to know which worker is causing the CPU to wake out of idle. The result is that PowerTOP now reports a lot of "kworker/a:b" instead of more readable results. This patch adds a pair of tracepoints to the new workqueue code, similar in style to the timer/hrtimer tracepoints. With this pair of tracepoints, the next PowerTOP can correctly report which work item caused the wakeup (and how long it took): Interrupt (43) i915 time 3.51ms wakeups 141 Work ieee80211_iface_work time 0.81ms wakeups 29 Work do_dbs_timer time 0.55ms wakeups 24 Process Xorg time 21.36ms wakeups 4 Timer sched_rt_period_timer time 0.01ms wakeups 1 Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds

workqueue: temporarily remove workqueue tracing

2010-06-29T08:07:11Z

Strip tracing code from workqueue and remove workqueue tracing. This is temporary measure till concurrency managed workqueue is complete. Signed-off-by: Tejun Heo Cc: Frederic Weisbecker