user/sven/linux.git/include/trace, branch v6.6.25

tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string

2024-03-15T14:48:16Z

[ Upstream commit 51270d573a8d9dd5afdc7934de97d66c0e14b5fd ] I'm updating __assign_str() and will be removing the second parameter. To make sure that it does not break anything, I make sure that it matches the __string() field, as that is where the string is actually going to be saved in. To make sure there's nothing that breaks, I added a WARN_ON() to make sure that what was used in __string() is the same that is used in __assign_str(). In doing this change, an error was triggered as __assign_str() now expects the string passed in to be a char * value. I instead had the following warning: include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’: include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types] 91 | __assign_str(dev, qdisc_dev(q)); That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q) to __assign_str() and to __string(). But that function returns a pointer to struct net_device and not a string. It appears that these events are just saving the pointer as a string and then reading it as a string as well. Use qdisc_dev(q)->name to save the device instead. Fixes: a34dac0b90552 ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()") Signed-off-by: Steven Rostedt (Google) Reviewed-by: Jamal Hadi Salim Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

rxrpc: Fix counting of new acks and nacks

2024-02-16T18:10:50Z

[ Upstream commit 41b7fa157ea1c8c3a575ca7f5f32034de9bee3ae ] Fix the counting of new acks and nacks when parsing a packet - something that is used in congestion control. As the code stands, it merely notes if there are any nacks whereas what we really should do is compare the previous SACK table to the new one, assuming we get two successive ACK packets with nacks in them. However, we really don't want to do that if we can avoid it as the tables might not correspond directly as one may be shifted from the other - something that will only get harder to deal with once extended ACK tables come into full use (with a capacity of up to 8192). Instead, count the number of nacks shifted out of the old SACK, the number of nacks retained in the portion still active and the number of new acks and nacks in the new table then calculate what we need. Note this ends up a bit of an estimate as the Rx protocol allows acks to be withdrawn by the receiver and packets requested to be retransmitted. Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs") Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

9p: prevent read overrun in protocol dump tracepoint

2024-01-01T12:42:43Z

commit a931c6816078af3e306e0f444f492396ce40de31 upstream. An out of bounds read can occur within the tracepoint 9p_protocol_dump. In the fast assign, there is a memcpy that uses a constant size of 32 (macro named P9_PROTO_DUMP_SZ). When the copy is invoked, the source buffer is not guaranteed match this size. It was found that in some cases the source buffer size is less than 32, resulting in a read that overruns. The size of the source buffer seems to be known at the time of the tracepoint being invoked. The allocations happen within p9_fcall_init(), where the capacity field is set to the allocated size of the payload buffer. This patch tries to fix the overrun by changing the fixed array to a dynamically sized array and using the minimum of the capacity value or P9_PROTO_DUMP_SZ as its length. The trace log statement is adjusted to account for this. Note that the trace log no longer splits the payload on the first 16 bytes. The full payload is now logged to a single line. To repro the orignal problem, operations to a plan 9 managed resource can be used. The simplest approach might just be mounting a shared filesystem (between host and guest vm) using the plan 9 protocol while the tracepoint is enabled. mount -t 9p -o trans=virtio The bpftrace program below can be used to show the out of bounds read. Note that a recent version of bpftrace is needed for the raw tracepoint support. The script was tested using v0.19.0. /* from include/net/9p/9p.h */ struct p9_fcall { u32 size; u8 id; u16 tag; size_t offset; size_t capacity; struct kmem_cache *cache; u8 *sdata; bool zc; }; tracepoint:9p:9p_protocol_dump { /* out of bounds read can happen when this tracepoint is enabled */ } rawtracepoint:9p_protocol_dump { $pdu = (struct p9_fcall *)arg1; $dump_sz = (uint64)32; if ($dump_sz > $pdu->capacity) { printf("reading %zu bytes from src buffer of %zu bytes\n", $dump_sz, $pdu->capacity); } } Signed-off-by: JP Kobryn Message-ID: <20231204202321.22730-1-inwardvessel@gmail.com> Fixes: 60ece0833b6c ("net/9p: allocate appropriate reduced message buffers") Cc: stable@vger.kernel.org Reviewed-by: Christian Schoenebeck Signed-off-by: Dominique Martinet Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix RTT determination to use any ACK as a source

2023-12-03T06:33:02Z

[ Upstream commit 3798680f2fbbe0ca3ab6138b34e0d161c36497ee ] Fix RTT determination to be able to use any type of ACK as the response from which RTT can be calculated provided its ack.serial is non-zero and matches the serial number of an outgoing DATA or ACK packet. This shouldn't be limited to REQUESTED-type ACKs as these can have other types substituted for them for things like duplicate or out-of-order packets. Fixes: 4700c4d80b7b ("rxrpc: Fix loss of RTT samples due to interposed ACK") Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

neighbor: tracing: Move pin6 inside CONFIG_IPV6=y section

2023-10-18T10:16:43Z

When CONFIG_IPV6=n, and building with W=1: In file included from include/trace/define_trace.h:102, from include/trace/events/neigh.h:255, from net/core/net-traces.c:51: include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’: include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable] 42 | struct in6_addr *pin6; | ^~~~ include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’ 402 | { assign; } \ | ^~~~~~ include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’ 44 | PARAMS(assign), \ | ^~~~~~ include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’ 23 | TRACE_EVENT(neigh_create, | ^~~~~~~~~~~ include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’ 41 | TP_fast_assign( | ^~~~~~~~~~~~~~ In file included from include/trace/define_trace.h:103, from include/trace/events/neigh.h:255, from net/core/net-traces.c:51: include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’: include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable] 42 | struct in6_addr *pin6; | ^~~~ include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’ 51 | { assign; } \ | ^~~~~~ include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’ 44 | PARAMS(assign), \ | ^~~~~~ include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’ 23 | TRACE_EVENT(neigh_create, | ^~~~~~~~~~~ include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’ 41 | TP_fast_assign( | ^~~~~~~~~~~~~~ Indeed, the variable pin6 is declared and initialized unconditionally, while it is only used and needlessly re-initialized when support for IPv6 is enabled. Fix this by dropping the unused variable initialization, and moving the variable declaration inside the existing section protected by a check for CONFIG_IPV6. Fixes: fc651001d2c5ca4f ("neighbor: Add tracepoint to __neigh_create") Signed-off-by: Geert Uytterhoeven Reviewed-by: Simon Horman Tested-by: Simon Horman # build-tested Reviewed-by: David Ahern Signed-off-by: David S. Miller

x86/xen: move paravirt lazy code

2023-09-19T05:04:49Z

Only Xen is using the paravirt lazy mode code, so it can be moved to Xen specific sources. This allows to make some of the functions static or to merge them into their only call sites. While at it do a rename from "paravirt" to "xen" for all moved specifiers. No functional change. Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20230913113828.18421-3-jgross@suse.com Signed-off-by: Juergen Gross

tracing: Replace strlcpy with strscpy in trace/events/task.h

2023-09-02T01:00:00Z

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Link: https://lore.kernel.org/linux-trace-kernel/20230831194212.1529941-1-azeemshaikh38@gmail.com Cc: Masami Hiramatsu Reviewed-by: Kees Cook Signed-off-by: Azeem Shaikh Signed-off-by: Steven Rostedt (Google)

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2023-09-01T16:53:54Z

Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ...

Merge tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

2023-08-31T22:32:18Z

Pull nfsd updates from Chuck Lever: "I'm thrilled to announce that the Linux in-kernel NFS server now offers NFSv4 write delegations. A write delegation enables a client to cache data and metadata for a single file more aggressively, reducing network round trips and server workload. Many thanks to Dai Ngo for contributing this facility, and to Jeff Layton and Neil Brown for reviewing and testing it. This release also sees the removal of all support for DES- and triple-DES-based Kerberos encryption types in the kernel's SunRPC implementation. These encryption types have been deprecated by the Internet community for years and are considered insecure. This change affects both the in-kernel NFS client and server. The server's UDP and TCP socket transports have now fully adopted David Howells' new bio_vec iterator so that no more than one sendmsg() call is needed to transmit each RPC message. In particular, this helps kTLS optimize record boundaries when sending RPC-with-TLS replies, and it takes the server a baby step closer to handling file I/O via folios. We've begun work on overhauling the SunRPC thread scheduler to remove a costly linked-list walk when looking for an idle RPC service thread to wake. The pre-requisites are included in this release. Thanks to Neil Brown for his ongoing work on this improvement" * tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits) Documentation: Add missing documentation for EXPORT_OP flags SUNRPC: Remove unused declaration rpc_modcount() SUNRPC: Remove unused declarations NFSD: da_addr_body field missing in some GETDEVICEINFO replies SUNRPC: Remove return value of svc_pool_wake_idle_thread() SUNRPC: make rqst_should_sleep() idempotent() SUNRPC: Clean up svc_set_num_threads SUNRPC: Count ingress RPC messages per svc_pool SUNRPC: Deduplicate thread wake-up code SUNRPC: Move trace_svc_xprt_enqueue SUNRPC: Add enum svc_auth_status SUNRPC: change svc_xprt::xpt_flags bits to enum SUNRPC: change svc_rqst::rq_flags bits to enum SUNRPC: change svc_pool::sp_flags bits to enum SUNRPC: change cache_head.flags bits to enum SUNRPC: remove timeout arg from svc_recv() SUNRPC: change svc_recv() to return void. SUNRPC: call svc_process() from svc_recv(). nfsd: separate nfsd_last_thread() from nfsd_put() nfsd: Simplify code around svc_exit_thread() call in nfsd() ...

Merge tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm

2023-08-31T22:02:12Z

Pull dlm updates from David Teigland: - Allow blocking posix lock requests to be interrupted while waiting. This requires a cancel request to be sent to the userspace daemon where posix lock requests are processed across the cluster. - Fix a posix lock patch from the previous cycle in which lock requests from different file systems could be mixed up. - Fix some long standing problems with nfs posix lock cancelation. - Add a new debugfs file for printing queued callbacks. - Stop modifying buffers that have been used to receive a message. - Misc cleanups and some refactoring. * tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix plock lookup when using multiple lockspaces fs: dlm: don't use RCOM_NAMES for version detection fs: dlm: create midcomms nodes when configure fs: dlm: constify receive buffer fs: dlm: drop rxbuf manipulation in dlm_recover_master_copy fs: dlm: drop rxbuf manipulation in dlm_copy_master_names fs: dlm: get recovery sequence number as parameter fs: dlm: cleanup lock order fs: dlm: remove clear_members_cb fs: dlm: add plock dev tracepoints fs: dlm: check on plock ops when exit dlm fs: dlm: debugfs for queued callbacks fs: dlm: remove unused processed_nodes fs: dlm: add missing spin_unlock fs: dlm: fix F_CANCELLK to cancel pending request fs: dlm: allow to F_SETLKW getting interrupted fs: dlm: remove twice newline