user/sven/linux.git/include/uapi/linux/Kbuild, branch v5.2.4

treewide: Add SPDX license identifier - Kbuild

2019-05-30T18:32:33Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman Reviewed-by: Kate Stewart Signed-off-by: Greg Kroah-Hartman

KVM: export and iif KVM is supported

2019-03-28T16:27:42Z

I do not see any consistency about headers_install of and . According to my analysis of Linux 5.1-rc1, there are 3 groups: [1] Both and are exported alpha, arm, hexagon, mips, powerpc, s390, sparc, x86 [2] is exported, but is not arc, arm64, c6x, h8300, ia64, m68k, microblaze, nios2, openrisc, parisc, sh, unicore32, xtensa [3] Neither nor is exported csky, nds32, riscv This does not match to the actual KVM support. At least, [2] is half-baked. Nor do arch maintainers look like they care about this. For example, commit 0add53713b1c ("microblaze: Add missing kvm_para.h to Kbuild") exported to user-space in order to fix an in-kernel build error. We have two ways to make this consistent: [A] export both and for all architectures, irrespective of the KVM support [B] Match the header export of and to the KVM support My first attempt was [A] because the code looks cleaner, but Paolo suggested [B]. So, this commit goes with [B]. For most architectures, was moved to the kernel-space. I changed include/uapi/linux/Kbuild so that it checks generated asm/kvm_para.h as well as check-in ones. After this commit, there will be two groups: [1] Both and are exported arm, arm64, mips, powerpc, s390, x86 [2] Neither nor is exported alpha, arc, c6x, csky, h8300, hexagon, ia64, m68k, microblaze, nds32, nios2, openrisc, parisc, riscv, sh, sparc, unicore32, xtensa Signed-off-by: Masahiro Yamada Acked-by: Cornelia Huck Signed-off-by: Paolo Bonzini

arch: remove stale comments "UAPI Header export list"

2019-01-06T00:46:51Z

These comments are leftovers of commit fcc8487d477a ("uapi: export all headers under uapi directories"). Prior to that commit, exported headers must be explicitly added to header-y. Now, all headers under the uapi/ directories are exported. Signed-off-by: Masahiro Yamada

uapi: export all headers under uapi directories

2017-05-10T15:21:54Z

Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch//include/uapi/asm/Kbuild; - arch//include/asm/Kbuild. Signed-off-by: Nicolas Dichtel Acked-by: Daniel Vetter Acked-by: Russell King Acked-by: Mark Salter Acked-by: Michael Ellerman (powerpc) Signed-off-by: Masahiro Yamada

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-05-09T02:03:25Z

Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...

misc: Add host side PCI driver for PCI test function device

2017-04-28T15:23:19Z

Add PCI endpoint test driver that can verify base address register, legacy interrupt/MSI interrupt and read/write/copy buffers between host and device. The corresponding pci-epf-test function driver should be used on the EP side. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Bjorn Helgaas

VSOCK: Add vsockmon device

2017-04-24T16:35:56Z

Add vsockmon virtual network device that receives packets from the vsock transports and exposes them to user space. Based on the nlmon device. Signed-off-by: Gerard Garcia Signed-off-by: Stefan Hajnoczi Signed-off-by: David S. Miller

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-04-15T00:51:16Z

Pull input fixes from Dmitry Torokhov: "Just a small update to xpad driver to recognize yet another gamepad, and another change making sure userio.h is exported" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add support for Razer Wildcat gamepad uapi: add missing install of userio.h

uapi: add missing install of userio.h

2017-03-25T06:06:39Z

While commit 5523662edd4f ("Input: add userio module") added userio.h under the uapi/ directory, it forgot to add the header file to Kbuild. Thus, the file was missing from header installation. Signed-off-by: Naohiro Aota Reviewed-by: Lyude Paul Signed-off-by: Dmitry Torokhov

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2017-03-02T21:53:13Z

Pull vhost updates from Michael Tsirkin: "virtio, vhost: optimizations, fixes Looks like a quiet cycle for vhost/virtio, just a couple of minor tweaks. Most notable is automatic interrupt affinity for blk and scsi. Hopefully other devices are not far behind" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-console: avoid DMA from stack vhost: introduce O(1) vq metadata cache virtio_scsi: use virtio IRQ affinity virtio_blk: use virtio IRQ affinity blk-mq: provide a default queue mapping for virtio device virtio: provide a method to get the IRQ affinity mask for a virtqueue virtio: allow drivers to request IRQ affinity when creating VQs virtio_pci: simplify MSI-X setup virtio_pci: don't duplicate the msix_enable flag in struct pci_dev virtio_pci: use shared interrupts for virtqueues virtio_pci: remove struct virtio_pci_vq_info vhost: try avoiding avail index access when getting descriptor virtio_mmio: expose header to userspace