user/sven/linux.git/include/uapi/linux/can, branch v4.19.159

can: dev: Add support for limiting configured bitrate

2018-01-16T14:11:32Z

Various CAN or CAN-FD IP may be able to run at a faster rate than what the transceiver the CAN node is connected to. This can lead to unexpected errors. However, CAN transceivers typically have fixed limitations and provide no means to discover these limitations at runtime. Therefore, add support for a can-transceiver node that can be reused by other CAN peripheral drivers to determine for both CAN and CAN-FD what the max bitrate that can be used. If the user tries to configure CAN to pass these maximum bitrates it will throw an error. Also add support for reading bitrate_max via the netlink interface. Reviewed-by: Suman Anna Signed-off-by: Franklin S Cooper Jr [nsekhar@ti.com: fix build error with !CONFIG_OF] Signed-off-by: Sekhar Nori Signed-off-by: Faiz Abbas Signed-off-by: Marc Kleine-Budde

License cleanup: add SPDX license identifier to uapi header files with a license

2017-11-02T10:20:11Z

Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX license identifier to uapi header files with no license

2017-11-02T10:19:54Z

Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

uapi: export all headers under uapi directories

2017-05-10T15:21:54Z

Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch//include/uapi/asm/Kbuild; - arch//include/asm/Kbuild. Signed-off-by: Nicolas Dichtel Acked-by: Daniel Vetter Acked-by: Russell King Acked-by: Mark Salter Acked-by: Michael Ellerman (powerpc) Signed-off-by: Masahiro Yamada

can: add Virtual CAN Tunnel driver (vxcan)

2017-04-25T07:04:30Z

Similar to the virtual ethernet driver veth, vxcan implements a local CAN traffic tunnel between two virtual CAN network devices. See Kconfig entry for details. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: dev: add CAN interface API for fixed bitrates

2017-01-24T12:52:00Z

Some CAN interfaces only support fixed fixed bitrates. This patch adds a netlink interface to get the list of the CAN interface's fixed bitrates and data bitrates. Inside the driver arrays of supported data- bitrate values are defined. const u32 drvname_bitrate[] = { 20000, 50000, 100000 }; const u32 drvname_data_bitrate[] = { 200000, 500000, 1000000 }; struct drvname_priv *priv; priv = netdev_priv(dev); priv->bitrate_const = drvname_bitrate; priv->bitrate_const_cnt = ARRAY_SIZE(drvname_bitrate); priv->data_bitrate_const = drvname_data_bitrate; priv->data_bitrate_const_cnt = ARRAY_SIZE(drvname_data_bitrate); Signed-off-by: Marc Kleine-Budde

can: dev: add CAN interface termination API

2017-01-24T12:52:00Z

This patch adds a netlink interface to configure the CAN bus termination of CAN interfaces. Inside the driver an array of supported termination values is defined: const u16 drvname_termination[] = { 60, 120, CAN_TERMINATION_DISABLED }; struct drvname_priv *priv; priv = netdev_priv(dev); priv->termination_const = drvname_termination; priv->termination_const_cnt = ARRAY_SIZE(drvname_termination); priv->termination = CAN_TERMINATION_DISABLED; And the funtion to set the value has to be defined: priv->do_set_termination = drvname_set_termination; Signed-off-by: Oliver Hartkopp Reviewed-by: Ramesh Shanmugasundaram Signed-off-by: Marc Kleine-Budde

can: bcm: add support for CAN FD frames

2016-06-17T13:39:46Z

The programming API of the CAN_BCM depends on struct can_frame which is given as array directly behind the bcm_msg_head structure. To follow this schema for the CAN FD frames a new flag 'CAN_FD_FRAME' in the bcm_msg_head flags indicates that the concatenated CAN frame structures behind the bcm_msg_head are defined as struct canfd_frame. This patch adds the support to handle CAN and CAN FD frames on a per BCM-op base. Main changes: - generally use struct canfd_frames instead if struct can_frames - use canfd_frame.flags instead of can_frame.can_dlc for private BCM flags - make all CAN frame sizes depending on the new CAN_FD_FRAME flags - separate between CAN and CAN FD when sending/receiving frames Due to the dependence of the CAN_FD_FRAME flag the former binary interface for classic CAN frames remains stable. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: avoid using timeval for uapi

2015-10-13T15:42:34Z

The can subsystem communicates with user space using a bcm_msg_head header, which contains two timestamps. This is problematic for multiple reasons: a) The structure layout is currently incompatible between 64-bit user space and 32-bit user space, and cannot work in compat mode (other than x32). b) The timeval structure layout will change in 32-bit user space when we fix the y2038 overflow problem by redefining time_t to 64-bit, making new 32-bit user space incompatible with the current kernel interface. Cars last a long time and often use old kernels, so the actual users of this code are the most likely ones to migrate to y2038 safe user space. This tries to work around part of the problem by changing the publicly visible user interface in the header, but not the binary interface. Fortunately, the values passed around in the structure are relative times and do not actually suffer from the y2038 overflow, so 32-bit is enough here. We replace the use of 'struct timeval' with a newly defined 'struct bcm_timeval' that uses the exact same binary layout as before and that still suffers from problem a) but not problem b). The downside of this approach is that any user space program that currently assigns a timeval structure to these members rather than writing the tv_sec/tv_usec portions individually will suffer a compile-time error when built with an updated kernel header. Fixing this error makes it work fine with old and new headers though. We could address problem a) by using '__u32' or 'int' members rather than 'long', but that would have a more significant downside in also breaking support for all existing 64-bit user binaries that might be using this interface, which is likely not acceptable. Signed-off-by: Arnd Bergmann Acked-by: Oliver Hartkopp Cc: linux-can@vger.kernel.org Cc: linux-api@vger.kernel.org Signed-off-by: Marc Kleine-Budde

can: cangw: introduce optional uid to reference created routing jobs

2015-06-09T07:39:49Z

Similar to referencing iptables rules by their line number this UID allows to reference created routing jobs, e.g. to alter configured data modifications. The UID is an optional non-zero value which can be provided at routing job creation time. When the UID is set the UID replaces the data modification configuration as job identification attribute e.g. at job removal time. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde