user/sven/linux.git/include/uapi/linux/ethtool.h, branch v4.19.62

ethtool: Add WAKE_FILTER and RX_CLS_FLOW_WAKE

2018-08-07T19:15:03Z

Add the ability to specify through ethtool::rxnfc that a rule location is special and will be used to participate in Wake-on-LAN, by e.g: having a specific pattern be matched. When this is the case, fs->ring_cookie must be set to the special value RX_CLS_FLOW_WAKE. We also define an additional ethtool::wolinfo flag: WAKE_FILTER which can be used to configure an Ethernet adapter to allow Wake-on-LAN using previously programmed filters. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

ethtool: Remove trailing semicolon for static inline

2018-08-04T21:56:23Z

Android's header sanitization tool chokes on static inline functions having a trailing semicolon, leading to an incorrectly parsed header file. While the tool should obviously be fixed, also fix the header files for the two affected functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf(). Fixes: 8cf6f497de40 ("ethtool: Add helper routines to pass vf to rx_flow_spec") Reporetd-by: Blair Prescott Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: ethtool: fix spelling mistake: "tubale" -> "tunable"

2018-07-14T01:26:27Z

Signed-off-by: Michael Heimpold Signed-off-by: David S. Miller

ethtool: Add support for configuring PFC stall prevention in ethtool

2018-03-26T20:46:46Z

In the event where the device unexpectedly becomes unresponsive for a long period of time, flow control mechanism may propagate pause frames which will cause congestion spreading to the entire network. To prevent this scenario, when the device is stalled for a period longer than a pre-configured timeout, flow control mechanisms are automatically disabled. This patch adds support for the ETHTOOL_PFC_STALL_PREVENTION as a tunable. This API provides support for configuring flow control storm prevention timeout (msec). Signed-off-by: Inbar Karmy Cc: Michal Kubecek Cc: Andrew Lunn Signed-off-by: Saeed Mahameed

net: ethtool: extend RXNFC API to support RSS spreading of filter matches

2018-03-09T02:54:52Z

We use a two-step process to configure a filter with RSS spreading. First, the RSS context is allocated and configured using ETHTOOL_SRSSH; this returns an identifier (rss_context) which can then be passed to subsequent invocations of ETHTOOL_SRXCLSRLINS to specify that the offset from the RSS indirection table lookup should be added to the queue number (ring_cookie) when delivering the packet. Drivers for devices which can only use the indirection table entry directly (not add it to a base queue number) should reject rule insertions combining RSS with a nonzero ring_cookie. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

net: ethtool: add support for reset of AP inside NIC interface.

2017-12-01T20:29:40Z

Add ETH_RESET_AP to reset the application processor(s) inside the NIC interface. Current ETH_RESET_MGMT supports a management processor inside this NIC. This is typically used for remote NIC management purposes. Application processors exist inside some SmartNICs to run various applications inside the NIC processor - be it a simple algorithm without an OS to as complex as hosting multiple VMs. Signed-off-by: Scott Branden Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

License cleanup: add SPDX license identifier to uapi header files with no license

2017-11-02T10:19:54Z

Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: ethtool: Add back transceiver type

2017-09-21T22:20:40Z

Commit 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") deprecated the ethtool_cmd::transceiver field, which was fine in premise, except that the PHY library was actually using it to report the type of transceiver: internal or external. Use the first word of the reserved field to put this __u8 transceiver field back in. It is made read-only, and we don't expect the ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this is mostly for the legacy path where we do: ethtool_get_settings() -> dev->ethtool_ops->get_link_ksettings() -> convert_link_ksettings_to_legacy_settings() to have no information loss compared to the legacy get_settings API. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: ethtool: add support for forward error correction modes

2017-07-30T06:23:44Z

Forward Error Correction (FEC) modes i.e Base-R and Reed-Solomon modes are introduced in 25G/40G/100G standards for providing good BER at high speeds. Various networking devices which support 25G/40G/100G provides ability to manage supported FEC modes and the lack of FEC encoding control and reporting today is a source for interoperability issues for many vendors. FEC capability as well as specific FEC mode i.e. Base-R or RS modes can be requested or advertised through bits D44:47 of base link codeword. This patch set intends to provide option under ethtool to manage and report FEC encoding settings for networking devices as per IEEE 802.3 bj, bm and by specs. set-fec/show-fec option(s) are designed to provide control and report the FEC encoding on the link. SET FEC option: root@tor: ethtool --set-fec swp1 encoding [off | RS | BaseR | auto] Encoding: Types of encoding Off : Turning off any encoding RS : enforcing RS-FEC encoding on supported speeds BaseR : enforcing Base R encoding on supported speeds Auto : IEEE defaults for the speed/medium combination Here are a few examples of what we would expect if encoding=auto: - if autoneg is on, we are expecting FEC to be negotiated as on or off as long as protocol supports it - if the hardware is capable of detecting the FEC encoding on it's receiver it will reconfigure its encoder to match - in absence of the above, the configuration would be set to IEEE defaults. >From our understanding , this is essentially what most hardware/driver combinations are doing today in the absence of a way for users to control the behavior. SHOW FEC option: root@tor: ethtool --show-fec swp1 FEC parameters for swp1: Active FEC encodings: RS Configured FEC encodings: RS | BaseR ETHTOOL DEVNAME output modification: ethtool devname output: root@tor:~# ethtool swp1 Settings for swp1: root@hpe-7712-03:~# ethtool swp18 Settings for swp18: Supported ports: [ FIBRE ] Supported link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: [RS | BaseR | None | Not reported] Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: [RS | BaseR | None | Not reported] <<<< One or more FEC modes Speed: 100000Mb/s Duplex: Full Port: FIBRE PHYAD: 106 Transceiver: internal Auto-negotiation: off Link detected: yes This patch includes following changes a) New ETHTOOL_SFECPARAM/SFECPARAM API, handled by the new get_fecparam/set_fecparam callbacks, provides support for configuration of forward error correction modes. b) Link mode bits for FEC modes i.e. None (No FEC mode), RS, BaseR/FC are defined so that users can configure these fec modes for supported and advertising fields as part of link autonegotiation. Signed-off-by: Vidya Sagar Ravipati Signed-off-by: Dustin Byford Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

ethtool.h: remind to update 802.3ad when adding new speeds

2017-06-08T20:05:41Z

Each time a new speed is added, the bonding 802.3ad isn't updated. Add a comment to remind the developer to update this driver. Signed-off-by: Nicolas Dichtel Acked-by: Andy Gospodarek Signed-off-by: David S. Miller