user/sven/linux.git/include/uapi/linux/ethtool.h, branch v4.9.109

net: ethtool: add support for 2500BaseT and 5000BaseT link modes

2017-07-05T12:40:19Z

[ Upstream commit 94842b4fc4d6b1691cfc86c6f5251f299d27f4ba ] This patch introduce support for 2500BaseT and 5000BaseT link modes. These modes are included in the new IEEE 802.3bz standard. Signed-off-by: Pavel Belous Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ethtool: silence warning on bit loss

2016-10-14T20:05:42Z

Sparse was complaining when we went to prototype some code using ethtool_cmd_speed_set and SPEED_100000, which uses the upper 16 bits of __u32 speed for the first time. CHECK ... .../uapi/linux/ethtool.h:123:28: warning: cast truncates bits from constant value (186a0 becomes 86a0) The warning is actually bogus, as no bits are really lost, but we can get rid of the sparse warning with this one small change. Reported-by: Preethi Banala Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller

net: ethtool: add support for 1000BaseX and missing 10G link modes

2016-08-29T04:27:34Z

This patch enhances ethtool link mode bitmap to include missing interface modes for 1G/10G speeds Changes: 1000baseX is the mode introduced to cover all 1G Fiber cases. All modes under 1000BaseX i.e. 1000BASE-SX, 1000BASE-LX, 1000BASE-LX10 and 1000BASE-BX10 are not explicitly defined at this moment. 10G CR,SR,LR and ER link modes are included for 10G speed.. Issue: ethtool on 1G/10G SFP port reports Base-T as this port supports 1000baseX,10G CR, SR and LR modes. root@tor-02$ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: off Current message level: 0x00000000 (0) Link detected: yes After fix: root@tor-02$ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full 10000baseER/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: off Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Vidya Sagar Ravipati Signed-off-by: David S. Miller

ethtool: Add 50G baseSR2 link mode

2016-06-27T08:10:41Z

Add ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT bit. Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Cc: Ben Hutchings Cc: David Decotigny Acked-By: David Decotigny Signed-off-by: David S. Miller

ethtool: add support for 25G/50G/100G speed modes

2016-05-25T19:26:54Z

This patch enhances ethtool link mode bitmap to include 25G/50G/100G speed along with interface modes Signed-off-by: Vidya Sagar Ravipati Signed-off-by: David S. Miller

ethtool: minor doc update

2016-03-22T19:45:44Z

Updates: commit 793cf87de9d1 ("ethtool: Set cmd field in ETHTOOL_GLINKSETTINGS response to wrong nwords") Signed-off-by: David Decotigny Signed-off-by: David S. Miller

ethtool.h: define INT_MAX for userland

2016-03-04T21:10:37Z

INT_MAX needs limits.h in userland. When ethtool.h is included by a userland app, we got the following error: .../usr/include/linux/ethtool.h: In function 'ethtool_validate_speed': .../usr/include/linux/ethtool.h:1471:18: error: 'INT_MAX' undeclared (first use in this function) return speed <= INT_MAX || speed == SPEED_UNKNOWN ^ Fixes: e02564ee334a ("ethtool: make validate_speed accept all speeds between 0 and INT_MAX") CC: Nikolay Aleksandrov Signed-off-by: Nicolas Dichtel Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

uapi: define DIV_ROUND_UP for userland

2016-03-04T21:10:36Z

DIV_ROUND_UP is defined in linux/kernel.h only for the kernel. When ethtool.h is included by a userland app, we got the following error: include/linux/ethtool.h:1218:8: error: variably modified 'queue_mask' at file scope __u32 queue_mask[DIV_ROUND_UP(MAX_NUM_QUEUE, 32)]; ^ Let's add a common definition in uapi and use it everywhere. Fixes: ac2c7ad0e5d6 ("net/ethtool: introduce a new ioctl for per queue setting") CC: Kan Liang Suggested-by: Ben Hutchings Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller

net: ethtool: add new ETHTOOL_xLINKSETTINGS API

2016-02-26T03:06:45Z

This patch defines a new ETHTOOL_GLINKSETTINGS/SLINKSETTINGS API, handled by the new get_link_ksettings/set_link_ksettings callbacks. This API provides support for most legacy ethtool_cmd fields, adds support for larger link mode masks (up to 4064 bits, variable length), and removes ethtool_cmd deprecated fields (transceiver/maxrxpkt/maxtxpkt). This API is deprecating the legacy ETHTOOL_GSET/SSET API and provides the following backward compatibility properties: - legacy ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks. - legacy ethtool with new get/set_link_ksettings drivers: the new driver callbacks are used, data internally converted to legacy ethtool_cmd. ETHTOOL_GSET will return only the 1st 32b of each link mode mask. ETHTOOL_SSET will fail if user tries to set the ethtool_cmd deprecated fields to non-0 (transceiver/maxrxpkt/maxtxpkt). A kernel warning is logged if driver sets higher bits. - future ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks, internally converted to new data structure. Deprecated fields (transceiver/maxrxpkt/maxtxpkt) will be ignored and seen as 0 from user space. Note that that "future" ethtool tool will not allow changes to these deprecated fields. - future ethtool with new drivers: direct call to the new callbacks. By "future" ethtool, what is meant is: - query: first try ETHTOOL_GLINKSETTINGS, and revert to ETHTOOL_GSET if fails - set: query first and remember which of ETHTOOL_GLINKSETTINGS or ETHTOOL_GSET was successful + if ETHTOOL_GLINKSETTINGS was successful, then change config with ETHTOOL_SLINKSETTINGS. A failure there is final (do not try ETHTOOL_SSET). + otherwise ETHTOOL_GSET was successful, change config with ETHTOOL_SSET. A failure there is final (do not try ETHTOOL_SLINKSETTINGS). The interaction user/kernel via the new API requires a small ETHTOOL_GLINKSETTINGS handshake first to agree on the length of the link mode bitmaps. If kernel doesn't agree with user, it returns the bitmap length it is expecting from user as a negative length (and cmd field is 0). When kernel and user agree, kernel returns valid info in all fields (ie. link mode length > 0 and cmd is ETHTOOL_GLINKSETTINGS). Data structure crossing user/kernel boundary is 32/64-bit agnostic. Converted internally to a legal kernel bitmap. The internal __ethtool_get_settings kernel helper will gradually be replaced by __ethtool_get_link_ksettings by the time the first "link_settings" drivers start to appear. So this patch doesn't change it, it will be removed before it needs to be changed. Signed-off-by: David Decotigny Signed-off-by: David S. Miller

net/ethtool: introduce a new ioctl for per queue setting

2016-02-20T03:54:09Z

Introduce a new ioctl ETHTOOL_PERQUEUE for per queue parameters setting. The following patches will enable some SUB_COMMANDs for per queue setting. Signed-off-by: Kan Liang Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller