user/sven/linux.git/include/uapi/linux/if_bridge.h, branch v4.9.10

net: bridge: export vlan flags with the stats

2016-08-19T06:18:42Z

Use one of the vlan xstats padding fields to export the vlan flags. This is needed in order to be able to distinguish between master (bridge) and port vlan entries in user-space when dumping the bridge vlan stats. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: bridge: extend MLD/IGMP query stats

2016-07-09T21:40:09Z

As was suggested this patch adds support for the different versions of MLD and IGMP query types. Since the user visible structure is still in net-next we can augment it instead of adding netlink attributes. The distinction between the different IGMP/MLD query types is done as suggested in Section 7.1, RFC 3376 [1] and Section 8.1, RFC 3810 [2] based on query payload size and code for IGMP. Since all IGMP packets go through multicast_rcv() and it uses ip_mc_check_igmp/ipv6_mc_check_mld we can be sure that at least the ip/ipv6 header can be directly used. [1] https://tools.ietf.org/html/rfc3376#section-7 [2] https://tools.ietf.org/html/rfc3810#section-8.1 Suggested-by: Linus Lüssing Signed-off-by: Nikolay Aleksandrov Acked-by: Stephen Hemminger Signed-off-by: David S. Miller

net: bridge: add support for IGMP/MLD stats and export them via netlink

2016-06-30T10:18:24Z

This patch adds stats support for the currently used IGMP/MLD types by the bridge. The stats are per-port (plus one stat per-bridge) and per-direction (RX/TX). The stats are exported via netlink via the new linkxstats API (RTM_GETSTATS). In order to minimize the performance impact, a new option is used to enable/disable the stats - multicast_stats_enabled, similar to the recent vlan stats. Also in order to avoid multiple IGMP/MLD type lookups and checks, we make use of the current "igmp" member of the bridge private skb->cb region to record the type on Rx (both host-generated and external packets pass by multicast_rcv()). We can do that since the igmp member was used as a boolean and all the valid IGMP/MLD types are positive values. The normal bridge fast-path is not affected at all, the only affected paths are the flooding ones and since we make use of the IGMP/MLD type, we can quickly determine if the packet should be counted using cache-hot data (cb's igmp member). We add counters for: * IGMP Queries * IGMP Leaves * IGMP v1/v2/v3 reports * MLD Queries * MLD Leaves * MLD v1/v2 reports These are invaluable when monitoring or debugging complex multicast setups with bridges. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: netlink: export per-vlan stats

2016-05-03T02:27:06Z

Add a new LINK_XSTATS_TYPE_BRIDGE attribute and implement the RTM_GETSTATS callbacks for IFLA_STATS_LINK_XSTATS (fill_linkxstats and get_linkxstats_size) in order to export the per-vlan stats. The paddings were added because soon these fields will be needed for per-port per-vlan stats (or something else if someone beats me to it) so avoiding at least a few more netlink attributes. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: mcast: add support for more router port information dumping

2016-03-01T21:55:07Z

Allow for more multicast router port information to be dumped such as timer and type attributes. For that that purpose we need to extend the MDBA_ROUTER_PORT attribute similar to how it was done for the mdb entries recently. The new format is thus: [MDBA_ROUTER_PORT] = { <- nested attribute u32 ifindex <- router port ifindex for user-space compatibility [MDBA_ROUTER_PATTR attributes] } This way it remains compatible with older users (they'll simply retrieve the u32 in the beginning) and new users can parse the remaining attributes. It would also allow to add future extensions to the router port without breaking compatibility. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: mcast: add support for temporary port router

2016-03-01T21:55:07Z

Add support for a temporary router port which doesn't depend only on the incoming query. It can be refreshed if set to the same value, which is a no-op for the rest. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: mcast: use names for the different multicast_router types

2016-03-01T21:55:07Z

Using raw values makes it difficult to extend and also understand the code, give them names and do explicit per-option manipulation in br_multicast_set_port_router. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: mdb: add support for more attributes and export timer

2016-02-19T20:27:36Z

Currently mdb entries are exported directly as a structure inside MDBA_MDB_ENTRY_INFO attribute, we can't really extend it without breaking user-space. In order to export new mdb fields, I've converted the MDBA_MDB_ENTRY_INFO into a nested attribute which starts like before with struct br_mdb_entry (without header, as it's casted directly in iproute2) and continues with MDBA_MDB_EATTR_ attributes. This way we keep compatibility with older users and can export new data. I've tested this with iproute2, both with and without support for the added attribute and it works fine. So basically we again have MDBA_MDB_ENTRY_INFO with struct br_mdb_entry inside but it may contain also some additional MDBA_MDB_EATTR_ attributes such as MDBA_MDB_EATTR_TIMER which can be parsed by user-space. So the new structure is: [MDBA_MDB] = { [MDBA_MDB_ENTRY] = { [MDBA_MDB_ENTRY_INFO] [MDBA_MDB_ENTRY_INFO] { <- Nested attribute struct br_mdb_entry <- nla_put_nohdr() [MDBA_MDB_ENTRY attributes] <- normal netlink attributes } } } Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: mdb: add support for offloaded mdb entries

2016-02-09T09:42:47Z

Add new bitmask member 'flags' to br_mdb_entry structure. Adding MDB_FLAGS_OFFLOAD bit which indicates MDB entries is offloaded to hardware. Signed-off-by: Elad Raz Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

bridge: vlan: add per-vlan struct and move to rhashtables

2015-09-29T20:36:06Z

This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller