user/sven/linux.git/include/uapi/linux/if_ether.h, branch v4.14.252

uapi/if_ether.h: move __UAPI_DEF_ETHHDR libc define

2019-02-20T09:20:55Z

commit da360299b6734135a5f66d7db458dcc7801c826a upstream. This fixes a compile problem of some user space applications by not including linux/libc-compat.h in uapi/if_ether.h. linux/libc-compat.h checks which "features" the header files, included from the libc, provide to make the Linux kernel uapi header files only provide no conflicting structures and enums. If a user application mixes kernel headers and libc headers it could happen that linux/libc-compat.h gets included too early where not all other libc headers are included yet. Then the linux/libc-compat.h would not prevent all the redefinitions and we run into compile problems. This patch removes the include of linux/libc-compat.h from uapi/if_ether.h to fix the recently introduced case, but not all as this is more or less impossible. It is no problem to do the check directly in the if_ether.h file and not in libc-compat.h as this does not need any fancy glibc header detection as glibc never provided struct ethhdr and should define __UAPI_DEF_ETHHDR by them self when they will provide this. The following test program did not compile correctly any more: #include #include #include int main(void) { return 0; } Fixes: 6926e041a892 ("uapi/if_ether.h: prevent redefinition of struct ethhdr") Reported-by: Guillaume Nault Cc: # 4.15 Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller Cc: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

uapi/if_ether.h: prevent redefinition of struct ethhdr

2019-02-20T09:20:44Z

commit 6926e041a8920c8ec27e4e155efa760aa01551fd upstream. Musl provides its own ethhdr struct definition. Add a guard to prevent its definition of the appropriate musl header has already been included. glibc does not implement this header, but when glibc will implement this they can just define __UAPI_DEF_ETHHDR 0 to make it work with the kernel. Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off

2018-05-30T05:52:16Z

[ Upstream commit 4bbb3e0e8239f9079bf1fe20b3c0cb598714ae61 ] When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by: Brandon Carpenter Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX license identifier to uapi header files with a license

2017-11-02T10:20:11Z

Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: ether: Add support for multiplexing and aggregation type

2017-08-30T18:41:13Z

Define the Qualcomm multiplexing and aggregation (MAP) ether type 0x00F9. This is needed for receiving data in the MAP protocol like RMNET. This is not an officially registered ID. Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller

ether: add NSH ethertype

2017-08-29T22:16:52Z

The NSH draft says: An IEEE EtherType, 0x894F, has been allocated for NSH. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller

if_ether: add forces ife lfb type

2017-08-29T22:14:18Z

This patch adds the forces IFE lfb type according to IEEE registered ethertypes. See http://standards-oui.ieee.org/ethertype/eth.txt for more information. Since there exists the IFE subsystem it can be used there. This patch also use the correct word "ForCES" instead of "FoRCES" which is a spelling error inside the IEEE ethertype specification. Signed-off-by: Alexander Aring Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller

gre: introduce native tunnel support for ERSPAN

2017-08-22T21:29:30Z

The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu Signed-off-by: Meenakshi Vohra Cc: Alexey Kuznetsov Cc: Hideaki YOSHIFUJI Signed-off-by: David S. Miller

RDMA: Adding ethertype ETH_P_IBOE

2017-01-10T19:05:11Z

Update the if_ether.h with the ethertype for Infiniband over Ethernet packets. Also, removing the occurances of 0x8915 from infiniband vendor drivers. Signed-off-by: Selvin Xavier Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford

ethernet: use net core MTU range checking in more drivers

2016-10-20T18:51:08Z

Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen CC: Netanel Belgazal CC: Tom Lendacky CC: Santosh Raspatur CC: Hariprasad S CC: Sathya Perla CC: Ajit Khaparde CC: Sriharsha Basavapatna CC: Somnath Kotur CC: Thomas Falcon CC: John Allen CC: Guo-Fu Tseng CC: Sebastian Hesselbarth CC: Jiri Pirko CC: Ido Schimmel CC: Manish Chopra CC: Sony Chacko CC: Rajesh Borundia CC: Timur Tabi CC: Anirudha Sarangi CC: John Linn Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller