user/sven/linux.git/include/uapi/linux/if_link.h, branch v4.19.259

net: report min and max mtu network device settings

2018-07-29T19:57:26Z

Report the minimum and maximum MTU allowed on a device via netlink so that it can be displayed by tools like ip link. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next

2018-07-27T16:33:37Z

Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-07-27 1) Extend the output_mark to also support the input direction and masking the mark values before applying to the skb. 2) Add a new lookup key for the upcomming xfrm interfaces. 3) Extend the xfrm lookups to match xfrm interface IDs. 4) Add virtual xfrm interfaces. The purpose of these interfaces is to overcome the design limitations that the existing VTI devices have. The main limitations that we see with the current VTI are the following: VTI interfaces are L3 tunnels with configurable endpoints. For xfrm, the tunnel endpoint are already determined by the SA. So the VTI tunnel endpoints must be either the same as on the SA or wildcards. In case VTI tunnel endpoints are same as on the SA, we get a one to one correlation between the SA and the tunnel. So each SA needs its own tunnel interface. On the other hand, we can have only one VTI tunnel with wildcard src/dst tunnel endpoints in the system because the lookup is based on the tunnel endpoints. The existing tunnel lookup won't work with multiple tunnels with wildcard tunnel endpoints. Some usecases require more than on VTI tunnel of this type, for example if somebody has multiple namespaces and every namespace requires such a VTI. VTI needs separate interfaces for IPv4 and IPv6 tunnels. So when routing to a VTI, we have to know to which address family this traffic class is going to be encapsulated. This is a lmitation because it makes routing more complex and it is not always possible to know what happens behind the VTI, e.g. when the VTI is move to some namespace. VTI works just with tunnel mode SAs. We need generic interfaces that ensures transfomation, regardless of the xfrm mode and the encapsulated address family. VTI is configured with a combination GRE keys and xfrm marks. With this we have to deal with some extra cases in the generic tunnel lookup because the GRE keys on the VTI are actually not GRE keys, the GRE keys were just reused for something else. All extensions to the VTI interfaces would require to add even more complexity to the generic tunnel lookup. So to overcome this, we developed xfrm interfaces with the following design goal: It should be possible to tunnel IPv4 and IPv6 through the same interface. No limitation on xfrm mode (tunnel, transport and beet). Should be a generic virtual interface that ensures IPsec transformation, no need to know what happens behind the interface. Interfaces should be configured with a new key that must match a new policy/SA lookup key. The lookup logic should stay in the xfrm codebase, no need to change or extend generic routing and tunnel lookups. Should be possible to use IPsec hardware offloads of the underlying interface. 5) Remove xfrm pcpu policy cache. This was added after the flowcache removal, but it turned out to make things even worse. From Florian Westphal. 6) Allow to update the set mark on SA updates. From Nathan Harold. 7) Convert some timestamps to time64_t. From Arnd Bergmann. 8) Don't check the offload_handle in xfrm code, it is an opaque data cookie for the driver. From Shannon Nelson. 9) Remove xfrmi interface ID from flowi. After this pach no generic code is touched anymore to do xfrm interface lookups. From Benedict Wong. 10) Allow to update the xfrm interface ID on SA updates. From Nathan Harold. 11) Don't pass zero to ERR_PTR() in xfrm_resolve_and_create_bundle. From YueHaibing. 12) Return more detailed errors on xfrm interface creation. From Benedict Wong. 13) Use PTR_ERR_OR_ZERO instead of IS_ERR + PTR_ERR. From the kbuild test robot. ==================== Signed-off-by: David S. Miller

net: bridge: add support for backup port

2018-07-23T16:32:15Z

This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

xdp: support simultaneous driver and hw XDP attachment

2018-07-13T18:26:35Z

Split the query of HW-attached program from the software one. Introduce new .ndo_bpf command to query HW-attached program. This will allow drivers to install different programs in HW and SW at the same time. Netlink can now also carry multiple programs on dump (in which case mode will be set to XDP_ATTACHED_MULTI and user has to check per-attachment point attributes, IFLA_XDP_PROG_ID will not be present). We reuse IFLA_XDP_PROG_ID skb space for second mode, so rtnl_xdp_size() doesn't need to be updated. Note that the installation side is still not there, since all drivers currently reject installing more than one program at the time. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Signed-off-by: Daniel Borkmann

xdp: add per mode attributes for attached programs

2018-07-13T18:26:35Z

In preparation for support of simultaneous driver and hardware XDP support add per-mode attributes. The catch-all IFLA_XDP_PROG_ID will still be reported, but user space can now also access the program ID in a new IFLA_XDP__PROG_ID attribute. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Signed-off-by: Daniel Borkmann

xfrm: Add virtual xfrm interfaces

2018-06-23T14:07:25Z

This patch adds support for virtual xfrm interfaces. Packets that are routed through such an interface are guaranteed to be IPsec transformed or dropped. It is a generic virtual interface that ensures IPsec transformation, no need to know what happens behind the interface. This means that we can tunnel IPv4 and IPv6 through the same interface and support all xfrm modes (tunnel, transport and beet) on it. Co-developed-by: Lorenzo Colitti Co-developed-by: Benedict Wong Signed-off-by: Lorenzo Colitti Signed-off-by: Benedict Wong Signed-off-by: Steffen Klassert Acked-by: Shannon Nelson Tested-by: Benedict Wong Tested-by: Antony Antony Reviewed-by: Eyal Birger

net: bridge: add support for port isolation

2018-05-25T18:37:20Z

This patch adds support for a new port flag - BR_ISOLATED. If it is set then isolated ports cannot communicate between each other, but they can still communicate with non-isolated ports. The same can be achieved via ACLs but they can't scale with large number of ports and also the complexity of the rules grows. This feature can be used to achieve isolated vlan functionality (similar to pvlan) as well, though currently it will be port-wide (for all vlans on the port). The new test in should_deliver uses data that is already cache hot and the new boolean is used to avoid an additional source port test in should_deliver. Signed-off-by: Nikolay Aleksandrov Reviewed-by: Toshiaki Makita Signed-off-by: David S. Miller

vxlan: add ttl inherit support

2018-04-17T17:53:13Z

Like tos inherit, ttl inherit should also means inherit the inner protocol's ttl values, which actually not implemented in vxlan yet. But we could not treat ttl == 0 as "use the inner TTL", because that would be used also when the "ttl" option is not specified and that would be a behavior change, and breaking real use cases. So add a different attribute IFLA_VXLAN_TTL_INHERIT when "ttl inherit" is specified with ip cmd. Reported-by: Jianlin Shi Suggested-by: Jiri Benc Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller

net: qualcomm: rmnet: Export mux_id and flags to netlink

2018-03-22T19:00:44Z

Define new netlink attributes for rmnet mux_id and flags. These flags / mux_id were earlier using vlan flags / id respectively. The flag bits are also moved to uapi and are renamed with prefix RMNET_FLAG_*. Also add the rmnet policy to handle the new netlink attributes. Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller

tun: export flags, uid, gid, queue information over netlink

2018-02-16T21:58:22Z

Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller