user/sven/linux.git/include/uapi/linux/if_link.h, branch v4.9.277

net: Update API for VF vlan protocol 802.1ad support

2016-09-24T12:01:26Z

Introduce new rtnl UAPI that exposes a list of vlans per VF, giving the ability for user-space application to specify it for the VF, as an option to support 802.1ad. We adjusted IP Link tool to support this option. For future use cases, the new UAPI supports multiple vlans. For now we limit the list size to a single vlan in kernel. Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward compatibility with older versions of IP Link tool. Add a vlan protocol parameter to the ndo_set_vf_vlan callback. We kept 802.1Q as the drivers' default vlan protocol. Suitable ip link tool command examples: Set vf vlan protocol 802.1ad: ip link set eth0 vf 1 vlan 100 proto 802.1ad Set vf to VST (802.1Q) mode: ip link set eth0 vf 1 vlan 100 proto 802.1Q Or by omitting the new parameter ip link set eth0 vf 1 vlan 100 Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller

ipvlan: Introduce l3s mode

2016-09-19T05:25:22Z

In a typical IPvlan L3 setup where master is in default-ns and each slave is into different (slave) ns. In this setup egress packet processing for traffic originating from slave-ns will hit all NF_HOOKs in slave-ns as well as default-ns. However same is not true for ingress processing. All these NF_HOOKs are hit only in the slave-ns skipping them in the default-ns. IPvlan in L3 mode is restrictive and if admins want to deploy iptables rules in default-ns, this asymmetric data path makes it impossible to do so. This patch makes use of the l3_rcv() (added as part of l3mdev enhancements) to perform input route lookup on RX packets without changing the skb->dev and then uses nf_hook at NF_INET_LOCAL_IN to change the skb->dev just before handing over skb to L4. Signed-off-by: Mahesh Bandewar CC: David Ahern Reviewed-by: David Ahern Signed-off-by: David S. Miller

net: core: Add offload stats to if_stats_msg

2016-09-19T02:33:42Z

Add a nested attribute of offload stats to if_stats_msg named IFLA_STATS_LINK_OFFLOAD_XSTATS. Under it, add SW stats, meaning stats only per packets that went via slowpath to the cpu, named IFLA_OFFLOAD_XSTATS_CPU_HIT. Signed-off-by: Nogah Frankel Signed-off-by: Jiri Pirko Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: bridge: add per-port multicast flood flag

2016-09-02T05:48:33Z

Add a per-port flag to control the unknown multicast flood, similar to the unknown unicast flood flag and break a few long lines in the netlink flag exports. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

rtnl: add option for setting link xdp prog

2016-07-20T04:46:32Z

Sets the bpf program represented by fd as an early filter in the rx path of the netdev. The fd must have been created as BPF_PROG_TYPE_XDP. Providing a negative value as fd clears the program. Getting the fd back via rtnl is not possible, therefore reading of this value merely provides a bool whether the program is valid on the link or not. Signed-off-by: Brenden Blanco Signed-off-by: David S. Miller

net: bridge: add support for IGMP/MLD stats and export them via netlink

2016-06-30T10:18:24Z

This patch adds stats support for the currently used IGMP/MLD types by the bridge. The stats are per-port (plus one stat per-bridge) and per-direction (RX/TX). The stats are exported via netlink via the new linkxstats API (RTM_GETSTATS). In order to minimize the performance impact, a new option is used to enable/disable the stats - multicast_stats_enabled, similar to the recent vlan stats. Also in order to avoid multiple IGMP/MLD type lookups and checks, we make use of the current "igmp" member of the bridge private skb->cb region to record the type on Rx (both host-generated and external packets pass by multicast_rcv()). We can do that since the igmp member was used as a boolean and all the valid IGMP/MLD types are positive values. The normal bridge fast-path is not affected at all, the only affected paths are the flooding ones and since we make use of the IGMP/MLD type, we can quickly determine if the packet should be counted using cache-hot data (cb's igmp member). We add counters for: * IGMP Queries * IGMP Leaves * IGMP v1/v2/v3 reports * MLD Queries * MLD Leaves * MLD v1/v2 reports These are invaluable when monitoring or debugging complex multicast setups with bridges. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

net: rtnetlink: add support for the IFLA_STATS_LINK_XSTATS_SLAVE attribute

2016-06-30T10:15:04Z

This patch adds support for the IFLA_STATS_LINK_XSTATS_SLAVE attribute which allows to export per-slave statistics if the master device supports the linkxstats callback. The attribute is passed down to the linkxstats callback and it is up to the callback user to use it (an example has been added to the only current user - the bridge). This allows us to query only specific slaves of master devices like bridge ports and export only what we're interested in instead of having to dump all ports and searching only for a single one. This will be used to export per-port IGMP/MLD stats and also per-port vlan stats in the future, possibly other statistics as well. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)

2016-05-10T16:25:04Z

This is an initial implementation of a netdev driver for GTP datapath (GTP-U) v0 and v1, according to the GSM TS 09.60 and 3GPP TS 29.060 standards. This tunneling protocol is used to prevent subscribers from accessing mobile carrier core network infrastructure. This implementation requires a GGSN userspace daemon that implements the signaling protocol (GTP-C), such as OpenGGSN [1]. This userspace daemon updates the PDP context database that represents active subscriber sessions through a genetlink interface. For more context on this tunneling protocol, you can check the slides that were presented during the NetDev 1.1 [2]. Only IPv4 is supported at this time. [1] http://git.osmocom.org/openggsn/ [2] http://www.netdevconf.org/1.1/proceedings/slides/schultz-welte-osmocom-gtp.pdf Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

bridge: netlink: export per-vlan stats

2016-05-03T02:27:06Z

Add a new LINK_XSTATS_TYPE_BRIDGE attribute and implement the RTM_GETSTATS callbacks for IFLA_STATS_LINK_XSTATS (fill_linkxstats and get_linkxstats_size) in order to export the per-vlan stats. The paddings were added because soon these fields will be needed for per-port per-vlan stats (or something else if someone beats me to it) so avoiding at least a few more netlink attributes. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: vlan: learn to count

2016-05-03T02:27:06Z

Add support for per-VLAN Tx/Rx statistics. Every global vlan context gets allocated a per-cpu stats which is then set in each per-port vlan context for quick access. The br_allowed_ingress() common function is used to account for Rx packets and the br_handle_vlan() common function is used to account for Tx packets. Stats accounting is performed only if the bridge-wide vlan_stats_enabled option is set either via sysfs or netlink. A struct hole between vlan_enabled and vlan_proto is used for the new option so it is in the same cache line. Currently it is binary (on/off) but it is intentionally restricted to exactly 0 and 1 since other values will be used in the future for different purposes (e.g. per-port stats). Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller