user/sven/linux.git/include/uapi/linux/nl80211.h, branch v4.4.284

cfg80211: further limit wiphy names to 64 bytes

2018-06-06T14:46:21Z

commit 814596495dd2b9d4aab92d8f89cf19060d25d2ea upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by: Eric Biggers Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

cfg80211: limit wiphy names to 128 bytes

2018-05-26T06:49:00Z

commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream. There's currently no limit on wiphy names, other than netlink message size and memory limitations, but that causes issues when, for example, the wiphy name is used in a uevent, e.g. in rfkill where we use the same name for the rfkill instance, and then the buffer there is "only" 2k for the environment variables. This was reported by syzkaller, which used a 4k name. Limit the name to something reasonable, I randomly picked 128. Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

cfg80211: Add multiple scan plans for scheduled scan

2015-10-13T08:35:26Z

Add the option to configure multiple 'scan plans' for scheduled scan. Each 'scan plan' defines the number of scan cycles and the interval between scans. The scan plans are executed in the order they were configured. The last scan plan will always run infinitely and thus defines only the interval between scans. The maximum number of scan plans supported by the device and the maximum number of iterations in a single scan plan are advertised to userspace so it can configure the scan plans appropriately. When scheduled scan results are received there is no way to know which scan plan is being currently executed, so there is no way to know when the next scan iteration will start. This is not a problem, however. The scan start timestamp is only used for flushing old scan results, and there is no difference between flushing all results received until the end of the previous iteration or the start of the current one, since no results will be received in between. Signed-off-by: Avraham Stern Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg

nl80211: allow BSS data to include CLOCK_BOOTTIME timestamp

2015-10-13T08:32:17Z

For location and connectivity services, userspace would often like to know the time when the BSS was last seen. The current "last seen" value is calculated in a way that makes it less useful, especially if the system suspended in the meantime. Add the ability for the driver to report a real CLOCK_BOOTTIME stamp that can then be reported to userspace (if present). Drivers wishing to use this must be converted to the new API to call cfg80211_inform_bss_data() or cfg80211_inform_bss_frame_data(). They need to ensure the reported value is accurate enough even when the frame might have been buffered in the device (e.g. firmware.) Signed-off-by: Dmitry Shmidt [modified to use struct, inlines] Signed-off-by: Johannes Berg

cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA

2015-05-06T13:50:02Z

The GO_CONCURRENT regulatory definition can be extended to station interfaces requesting to IR as part of TDLS off-channel operations. Rename the GO_CONCURRENT flag to IR_CONCURRENT and allow the added use-case. Change internal users of GO_CONCURRENT to use the new definition. Signed-off-by: Arik Nemtsov Reviewed-by: Johannes Berg Signed-off-by: Johannes Berg

nl80211: small clarification of the sched_scan delay attribute

2015-03-30T08:25:35Z

Just clarify that the delay is only before the first cycle. Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg

cfg80211: Add API to change the indoor regulatory setting

2015-03-06T08:37:47Z

Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez Signed-off-by: ArikX Nemtsov Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg

nl80211: prohibit mixing 'any' and regular wowlan triggers

2015-03-04T09:34:11Z

If the device supports waking up on 'any' signal - i.e. it continues operating as usual and wakes up the host on pretty much anything that happens, then it makes no sense to also configure the more restricted WoWLAN mode where the device operates more autonomously but also in a more restricted fashion. Currently only cw2100 supports both 'any' and other triggers, but it seems to be broken as it doesn't configure anything to the device, so we can't currently get into a situation where both even can correctly be configured. This is about to change (Intel devices are going to support both and have different behaviour depending on configuration) so make sure the conflicting modes cannot be configured. (It seems that cw2100 advertises 'any' and 'disconnect' as a means of saying that's what it will always do, but that isn't really the way this API was meant to be used nor does it actually mean anything as 'any' always implies 'disconnect' already, and the driver doesn't change device configuration in any way depending on the settings.) Signed-off-by: Johannes Berg

nl80211: add notes about userspace API/ABI modifications

2015-03-03T14:56:06Z

Add notes about userspace ABI/API modifications, including the fact that we decided that API submissions should come with a driver implementation. Signed-off-by: Johannes Berg

cfg80211: add VHT support for IBSS

2015-03-03T14:56:04Z

Add NL80211_EXT_FEATURE_VHT_IBSS flag and VHT support for IBSS. Signed-off-by: Janusz Dziedzic Signed-off-by: Johannes Berg