user/sven/linux.git/include/uapi/linux/rtnetlink.h, branch v5.15.80

Add Open Routing Protocol ID to `rtnetlink.h`

2021-03-24T23:31:23Z

- The Open Routing (Open/R) network protocol netlink handler uses ID 99 - Will also add to `/etc/iproute2/rt_protos` once this is accepted - For more information: https://github.com/facebook/openr Signed-off-by: From: Cooper Lees Signed-off-by: David S. Miller

nexthop: Add netlink defines and enumerators for resilient NH groups

2021-03-12T00:12:59Z

- RTM_NEWNEXTHOP et.al. that handle resilient groups will have a new nested attribute, NHA_RES_GROUP, whose elements are attributes NHA_RES_GROUP_*. - RTM_NEWNEXTHOPBUCKET et.al. is a suite of new messages that will currently serve only for dumping of individual buckets of resilient next hop groups. For nexthop group buckets, these messages will carry a nested attribute NHA_RES_BUCKET, whose elements are attributes NHA_RES_BUCKET_*. There are several reasons why a new suite of messages is created for nexthop buckets instead of overloading the information on the existing RTM_{NEW,DEL,GET}NEXTHOP messages. First, a nexthop group can contain a large number of nexthop buckets (4k is not unheard of). This imposes limits on the amount of information that can be encoded for each nexthop bucket given a netlink message is limited to 64k bytes. Second, while RTM_NEWNEXTHOPBUCKET is only used for notifications at this point, in the future it can be extended to provide user space with control over nexthop buckets configuration. - The new group type is NEXTHOP_GRP_TYPE_RES. Note that nexthop code is adjusted to bounce groups with that type for now. Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Reviewed-by: David Ahern Signed-off-by: Petr Machata Signed-off-by: David S. Miller

rtnetlink: Add RTM_F_OFFLOAD_FAILED flag

2021-02-09T00:47:02Z

The flag indicates to user space that route offload failed. Previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, but if the offload fails there is no indication to user-space. The flag will be used in subsequent patches by netdevsim and mlxsw to indicate to user space that route offload failed, so that users will have better visibility into the offload process. Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

net: sched: alias action flags with TCA_ACT_ prefix

2020-11-25T20:34:44Z

Currently both filter and action flags use same "TCA_" prefix which makes them hard to distinguish to code and confusing for users. Create aliases for existing action flags constants with "TCA_ACT_" prefix. Signed-off-by: Vlad Buslov Link: https://lore.kernel.org/r/20201124164054.893168-1-vlad@buslov.dev Signed-off-by: Jakub Kicinski

rtnetlink: Add RTNH_F_TRAP flag

2020-11-06T19:28:49Z

The flag indicates to user space that the nexthop is not programmed to forward packets in hardware, but rather to trap them to the CPU. This is needed, for example, when the MAC of the nexthop neighbour is not resolved and packets should reach the CPU to trigger neighbour resolution. The flag will be used in subsequent patches by netdevsim to test nexthop objects programming to device drivers and in the future by mlxsw as well. Changes since RFC: * Reword commit message Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski

net: sched: implement action-specific terse dump

2020-11-05T16:27:43Z

Allow user to request action terse dump with new flag value TCA_FLAG_TERSE_DUMP. Only output essential action info in terse dump (kind, stats, index and cookie, if set by the user when creating the action). This is different from filter terse dump where index is excluded (filter can be identified by its own handle). Move tcf_action_dump_terse() function to the beginning of source file in order to call it from tcf_dump_walker(). Signed-off-by: Vlad Buslov Suggested-by: Jamal Hadi Salim Acked-by: Cong Wang Link: https://lore.kernel.org/r/20201102201243.287486-1-vlad@buslov.dev Signed-off-by: Jakub Kicinski

bridge: cfm: Netlink GET status Interface.

2020-10-30T01:39:44Z

This is the implementation of CFM netlink status get information interface. Add new nested netlink attributes. These attributes are used by the user space to get status information. GETLINK: Request filter RTEXT_FILTER_CFM_STATUS: Indicating that CFM status information must be delivered. IFLA_BRIDGE_CFM: Points to the CFM information. IFLA_BRIDGE_CFM_MEP_STATUS_INFO: This indicate that the MEP instance status are following. IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO: This indicate that the peer MEP status are following. CFM nested attribute has the following attributes in next level. GETLINK RTEXT_FILTER_CFM_STATUS: IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is u32. IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected Opcode. The type is u32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN: The MEP instance received CFM PDU with unexpected version. The type is u32 (bool). IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN: The MEP instance received CCM PDU with MD level lower than configured level. This frame is discarded. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE: The MEP instance number of the delivered status. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID: The added Peer MEP ID of the delivered status. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT: The CCM defect status. The type is u32 (bool). True means no CCM frame is received for 3.25 intervals. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL. IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI: The last received CCM PDU RDI. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE: The last received CCM PDU Port Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE: The last received CCM PDU Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN: A CCM frame has been received from Peer MEP. The type is u32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN: A CCM frame with TLV has been received from Peer MEP. The type is u32 (bool). This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN: A CCM frame with unexpected sequence number has been received from Peer MEP. The type is u32 (bool). When a sequence number is not one higher than previously received then it is unexpected. This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO. Signed-off-by: Henrik Bjoernlund Reviewed-by: Horatiu Vultur Acked-by: Nikolay Aleksandrov Signed-off-by: Jakub Kicinski

bridge: cfm: Netlink SET configuration Interface.

2020-10-30T01:39:43Z

This is the implementation of CFM netlink configuration set information interface. Add new nested netlink attributes. These attributes are used by the user space to create/delete/configure CFM instances. SETLINK: IFLA_BRIDGE_CFM: Indicate that the following attributes are CFM. IFLA_BRIDGE_CFM_MEP_CREATE: This indicate that a MEP instance must be created. IFLA_BRIDGE_CFM_MEP_DELETE: This indicate that a MEP instance must be deleted. IFLA_BRIDGE_CFM_MEP_CONFIG: This indicate that a MEP instance must be configured. IFLA_BRIDGE_CFM_CC_CONFIG: This indicate that a MEP instance Continuity Check (CC) functionality must be configured. IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD: This indicate that a CC Peer MEP must be added. IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE: This indicate that a CC Peer MEP must be removed. IFLA_BRIDGE_CFM_CC_CCM_TX: This indicate that the CC transmitted CCM PDU must be configured. IFLA_BRIDGE_CFM_CC_RDI: This indicate that the CC transmitted CCM PDU RDI must be configured. CFM nested attribute has the following attributes in next level. SETLINK RTEXT_FILTER_CFM_CONFIG: IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE: The created MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN: The created MEP domain. The type is u32 (br_cfm_domain). It must be BR_CFM_PORT. This means that CFM frames are transmitted and received directly on the port - untagged. Not in a VLAN. IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION: The created MEP direction. The type is u32 (br_cfm_mep_direction). It must be BR_CFM_MEP_DIRECTION_DOWN. This means that CFM frames are transmitted and received on the port. Not in the bridge. IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX: The created MEP residence port ifindex. The type is u32 (ifindex). IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE: The deleted MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC: The configured MEP unicast MAC address. The type is 6*u8 (array). This is used as SMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL: The configured MEP unicast MD level. The type is u32. It must be in the range 1-7. No CFM frames are passing through this MEP on lower levels. IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID: The configured MEP ID. The type is u32. It must be in the range 0-0x1FFF. This MEP ID is inserted in any transmitted CCM frame. IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE: The Continuity Check (CC) functionality is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL: The CC expected receive interval of CCM frames. The type is u32 (br_cfm_ccm_interval). This is also the transmission interval of CCM frames when enabled. IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID: The CC expected receive MAID in CCM frames. The type is CFM_MAID_LENGTH*u8. This is MAID is also inserted in transmitted CCM frames. IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_PEER_MEPID: The CC Peer MEP ID added. The type is u32. When a Peer MEP ID is added and CC is enabled it is expected to receive CCM frames from that Peer MEP. IFLA_BRIDGE_CFM_CC_RDI_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_RDI_RDI: The RDI that is inserted in transmitted CCM PDU. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE: The configured MEP instance number. The type is u32. IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC: The transmitted CCM frame destination MAC address. The type is 6*u8 (array). This is used as DMAC in all transmitted CFM frames. IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE: The transmitted CCM frame update (increment) of sequence number is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD: The period of time where CCM frame are transmitted. The type is u32. The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX must be done before timeout to keep transmission alive. When period is zero any ongoing CCM frame transmission will be stopped. IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV: The transmitted CCM frame update with Interface Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE: The transmitted Interface Status TLV value field. The type is u8. IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV: The transmitted CCM frame update with Port Status TLV is enabled or disabled. The type is u32 (bool). IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE: The transmitted Port Status TLV value field. The type is u8. Signed-off-by: Henrik Bjoernlund Reviewed-by: Horatiu Vultur Acked-by: Nikolay Aleksandrov Signed-off-by: Jakub Kicinski

bridge: Extend br_fill_ifinfo to return MPR status

2020-07-02T21:19:15Z

This patch extends the function br_fill_ifinfo to return also the MRP status for each instance on a bridge. It also adds a new filter RTEXT_FILTER_MRP to return the MRP status only when this is set, not to interfer with the vlans. The MRP status is return only on the bridge interfaces. Signed-off-by: Horatiu Vultur Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

rtnetlink: add keepalived rtm_protocol

2020-06-23T21:35:12Z

Keepalived can set global static ip routes or virtual ip routes dynamically following VRRP protocol states. Using a dedicated rtm_protocol will help keeping track of it. Changes in v2: - fix tab/space indenting Signed-off-by: Alexandre Cassen Signed-off-by: David S. Miller