user/sven/linux.git/include/uapi/linux/usb, branch v4.19.62

ALSA: usb-audio: Fix parse of UAC2 Extension Units

2019-07-14T06:11:16Z

commit ca95c7bf3d29716916baccdc77c3c2284b703069 upstream. Extension Unit (XU) is used to have a compatible layout with Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it for parsing the descriptors. Meanwhile, on UAC2, XU became slightly incompatible with PU; namely, XU has a one-byte bmControls bitmap while PU has two bytes bmControls bitmap. This incompatibility results in the read of a wrong address for the last iExtension field, which ended up with an incorrect string for the mixer element name, as recently reported for Focusrite Scarlett 18i20 device. This patch corrects this misalignment by introducing a couple of new macros and calling them depending on the descriptor type. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: Stefan Sauer Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-08-18T17:21:49Z

Pull USB/PHY updates from Greg KH: "Here is the big USB and phy driver patch set for 4.19-rc1. Nothing huge but there was a lot of work that happened this development cycle: - lots of type-c work, with drivers graduating out of staging, and displayport support being added. - new PHY drivers - the normal collection of gadget driver updates and fixes - code churn to work on the urb handling path, using irqsave() everywhere in anticipation of making this codepath a lot simpler in the future. - usbserial driver fixes and reworks - other misc changes All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: serial: pl2303: add a new device id for ATEN usb: renesas_usbhs: Kconfig: convert to SPDX identifiers usb: dwc3: gadget: Check MaxPacketSize from descriptor usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms usb: dwc2: Turn on uframe_sched on "amlogic" platforms usb: dwc2: Turn on uframe_sched on "his" platforms usb: dwc2: Turn on uframe_sched on "bcm" platforms usb: dwc2: gadget: ISOC's starting flow improvement usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic. usb: dwc3: core: Enable AutoRetry feature in the controller usb: dwc3: Set default mode for dwc_usb31 usb: gadget: udc: renesas_usb3: Add register of usb role switch usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep usb: dwc2: Modify dwc2_readl/writel functions prototype usb: dwc3: pci: Intel Merrifield can be host usb: dwc3: pci: Supply device properties via driver data arm64: dts: dwc3: description of incr burst type usb: dwc3: Enable undefined length INCR burst type usb: dwc3: add global soc bus configuration reg0 usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci ...

Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2018-07-30T08:21:14Z

Felipe writes: usb: changes for v4.19 Not a big pull request with only 37 non-merge commits, most of which are touching dwc2 (74% of the changes). The most important changes are dwc2's support for uframe scheduling and its endian-agnostic readl/writel wrappers. From dwc3 side we have a special new glue layer for Synopsys HAPS which will help Synopsys running FPGA validation using our upstream driver. We also have the beginnings of dual-role support for Intel Merrifield platform. Apart from these, just a series of non-critical changes.

usb: gadget: uvc: Move userspace API definition to public header

2018-07-26T10:33:39Z

The UVC gadget userspace API (V4L2 events and custom ioctls) is defined in a header internal to the kernel. Move it to a new public header to make it accessible to userspace. The UVC_INTF_CONTROL and UVC_INTF_STREAMING macros are not used, so remove them in the process. Signed-off-by: Laurent Pinchart Signed-off-by: Felipe Balbi

usb: usbtmc: Add ioctl for termination character

2018-07-21T06:22:15Z

add USBTMC_IOCTL_CONFIG_TERMCHAR to control TermChar handling for next read(). Controls field 'TermChar' and Bit 1 of field 'bmTransferAttributes' of REQUEST_DEV_DEP_MSG_IN BULK-OUT header. Allows enabling/disabling of terminating a read on reception of term_char individually for each read request. Reviewed-by: Steve Bayless Tested-by: Dave Penkler Signed-off-by: Dave Penkler Signed-off-by: Guido Kiener Signed-off-by: Greg Kroah-Hartman

usb: usbtmc: Add ioctl for EOM bit

2018-07-21T06:22:15Z

add USBTMC_IOCTL_EOM_ENABLE to specify EOM bit for next write() call. Sets Bit 0 of field 'bmTransferAttributes' of DEV_DEP_MSG_OUT Bulk-OUT Header. Allows fine grained control over end of message handling on a per file descriptor basis. Reviewed-by: Steve Bayless Tested-by: Dave Penkler Signed-off-by: Dave Penkler Signed-off-by: Guido Kiener Signed-off-by: Greg Kroah-Hartman

usb: usbtmc: Add ioctl for trigger

2018-07-21T06:22:15Z

add USBTMC488_IOCTL_TRIGGER to send TRIGGER Bulk-OUT header according to Subclass USB488 Specification The usbtmc trigger command is equivalent to the IEEE 488 GET (Group Execute Trigger) action. While the "*TRG" command can be sent as data to perform the same operation, in some situations an instrument will be busy and unable to process the data immediately in which case the USBTMC488_IOCTL_TRIGGER can be used to trigger the instrument with lower latency. Reviewed-by: Steve Bayless Tested-by: Dave Penkler Signed-off-by: Dave Penkler Signed-off-by: Guido Kiener Signed-off-by: Greg Kroah-Hartman

usb: usbtmc: Add ioctls to set/get usb timeout

2018-07-21T06:22:15Z

Add ioctls USBTMC_IOCTL_GET_TIMEOUT / USBTMC_IOCTL_SET_TIMEOUT to get/set I/O timeout for specific file handle. Different operations on an instrument can take different lengths of time thus it is important to be able to set the timeout slightly longer than the expected duration of each operation to optimise the responsiveness of the application. As the instrument may be shared by multiple applications the timeout should be settable on a per file descriptor basis. Tested-by: Dave Penkler Reviewed-by: Steve Bayless Signed-off-by: Dave Penkler Signed-off-by: Guido Kiener Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add support for Processing Units in UAC3

2018-07-16T14:35:34Z

This patch adds support for the Processig Units defined in the UAC3 spec. The main difference with the previous specs is the lack of on/off switches in the controls for these units and the addiction of the new Multi Function Processing Unit. The current version of the UAC3 spec doesn't define any useful controls for the new Multi Function Processing Unit so no control will get created once this unit is parsed. Signed-off-by: Jorge Sanjuan Signed-off-by: Takashi Iwai

Merge tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2018-06-15T08:24:40Z

Pull sound fixes from Takashi Iwai: "Here is a collection of small fixes on top of the previous update. All small and obvious fixes. Mostly for usual suspects, USB-audio and HD-audio, but a few trivial error handling fixes for misc drivers as well" * tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Always create the interrupt pipe for the mixer ALSA: usb-audio: Add insertion control for UAC3 BADD ALSA: usb-audio: Change in connectors control creation interface ALSA: usb-audio: Add bi-directional terminal types ALSA: lx6464es: add error handling for pci_ioremap_bar ALSA: sonicvibes: add error handling for snd_ctl_add ALSA: usb-audio: Remove explicitly listed Mytek devices ALSA: usb-audio: Generic DSD detection for XMOS-based implementations ALSA: usb-audio: Add native DSD support for Mytek DACs ALSA: hda/realtek - Add shutup hint ALSA: usb-audio: Disable the quirk for Nura headset ALSA: hda: add dock and led support for HP ProBook 640 G4 ALSA: hda: add dock and led support for HP EliteBook 830 G5 ALSA: emu10k1: add error handling for snd_ctl_add ALSA: fm801: add error handling for snd_ctl_add