<feed xmlns='http://www.w3.org/2005/Atom'>
<title>user/sven/linux.git/include/uapi/linux, branch v6.6.29</title>
<subtitle>Linux Kernel
</subtitle>
<id>https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v6.6.29</id>
<link rel='self' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v6.6.29'/>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/'/>
<updated>2024-04-27T15:11:36Z</updated>
<entry>
<title>PCI/DPC: Use FIELD_GET()</title>
<updated>2024-04-27T15:11:36Z</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2023-10-18T11:32:51Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=d9a28916ff356ebf2a622cc2787962651d9456c7'/>
<id>urn:sha1:d9a28916ff356ebf2a622cc2787962651d9456c7</id>
<content type='text'>
[ Upstream commit 9a9eec4765737b9b2a8d6ae03de6480a5f12dd5c ]

Use FIELD_GET() to remove dependencies on the field position, i.e., the
shift value. No functional change intended.

Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen &lt;ilpo.jarvinen@linux.intel.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>Input: allocate keycode for Display refresh rate toggle</title>
<updated>2024-04-13T11:07:37Z</updated>
<author>
<name>Gergo Koteles</name>
<email>soyer@irl.hu</email>
</author>
<published>2024-03-10T11:31:41Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=ed2f8b713a459e04cc4b29090ed61da2f5e748ab'/>
<id>urn:sha1:ed2f8b713a459e04cc4b29090ed61da2f5e748ab</id>
<content type='text'>
[ Upstream commit cfeb98b95fff25c442f78a6f616c627bc48a26b7 ]

Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event
when Fn + R is pressed. This is intended for use to switch between the
two refresh rates.

Allocate a new KEY_REFRESH_RATE_TOGGLE keycode for it.

Signed-off-by: Gergo Koteles &lt;soyer@irl.hu&gt;
Acked-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Link: https://lore.kernel.org/r/15a5d08c84cf4d7b820de34ebbcf8ae2502fb3ca.1710065750.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen &lt;ilpo.jarvinen@linux.intel.com&gt;
Signed-off-by: Ilpo Järvinen &lt;ilpo.jarvinen@linux.intel.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>net: fix IPSTATS_MIB_OUTPKGS increment in OutForwDatagrams.</title>
<updated>2024-04-03T13:28:39Z</updated>
<author>
<name>Heng Guo</name>
<email>heng.guo@windriver.com</email>
</author>
<published>2023-10-19T01:20:53Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=56712f74b7046b36d142f2f40613566afa0618df'/>
<id>urn:sha1:56712f74b7046b36d142f2f40613566afa0618df</id>
<content type='text'>
commit b4a11b2033b7d3dfdd46592f7036a775b18cecd1 upstream.

Reproduce environment:
network with 3 VM linuxs is connected as below:
VM1&lt;----&gt;VM2(latest kernel 6.5.0-rc7)&lt;----&gt;VM3
VM1: eth0 ip: 192.168.122.207 MTU 1500
VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500
VM3: eth0 ip: 192.168.123.240 MTU 1500

Reproduce:
VM1 send 1400 bytes UDP data to VM3 using tools scapy with flags=0.
scapy command:
send(IP(dst="192.168.123.240",flags=0)/UDP()/str('0'*1400),count=1,
inter=1.000000)

Result:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates
Ip: 1 64 11 0 3 4 0 0 4 7 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates
Ip: 1 64 12 0 3 5 0 0 4 8 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
"ForwDatagrams" increase from 4 to 5 and "OutRequests" also increase
from 7 to 8.

Issue description and patch:
IPSTATS_MIB_OUTPKTS("OutRequests") is counted with IPSTATS_MIB_OUTOCTETS
("OutOctets") in ip_finish_output2().
According to RFC 4293, it is "OutOctets" counted with "OutTransmits" but
not "OutRequests". "OutRequests" does not include any datagrams counted
in "ForwDatagrams".
ipSystemStatsOutOctets OBJECT-TYPE
    DESCRIPTION
           "The total number of octets in IP datagrams delivered to the
            lower layers for transmission.  Octets from datagrams
            counted in ipIfStatsOutTransmits MUST be counted here.
ipSystemStatsOutRequests OBJECT-TYPE
    DESCRIPTION
           "The total number of IP datagrams that local IP user-
            protocols (including ICMP) supplied to IP in requests for
            transmission.  Note that this counter does not include any
            datagrams counted in ipSystemStatsOutForwDatagrams.
So do patch to define IPSTATS_MIB_OUTPKTS to "OutTransmits" and add
IPSTATS_MIB_OUTREQUESTS for "OutRequests".
Add IPSTATS_MIB_OUTREQUESTS counter in __ip_local_out() for ipv4 and add
IPSTATS_MIB_OUT counter in ip6_finish_output2() for ipv6.

Test result with patch:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 9 0 5 1 0 0 3 3 0 0 0 0 0 0 0 0 0 4
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
  OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
  InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
  InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 2976 1896 0 0 0 0 0 9 0 0 0 0
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 10 0 5 2 0 0 3 3 0 0 0 0 0 0 0 0 0 5
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
  OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
  InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
  InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 4404 3324 0 0 0 0 0 10 0 0 0 0
----------------------------------------------------------------------
"ForwDatagrams" increase from 1 to 2 and "OutRequests" is keeping 3.
"OutTransmits" increase from 4 to 5 and "OutOctets" increase 1428.

Signed-off-by: Heng Guo &lt;heng.guo@windriver.com&gt;
Reviewed-by: Kun Song &lt;Kun.Song@windriver.com&gt;
Reviewed-by: Filip Pudak &lt;filip.pudak@windriver.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Reported-by: Vitezslav Samel &lt;vitezslav@samel.cz&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>uapi: in6: replace temporary label with rfc9486</title>
<updated>2024-03-06T14:48:35Z</updated>
<author>
<name>Justin Iurman</name>
<email>justin.iurman@uliege.be</email>
</author>
<published>2024-02-26T12:49:21Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=af6dfe9e9551dd5fbc81fa5cbadb73e80d9ef6dd'/>
<id>urn:sha1:af6dfe9e9551dd5fbc81fa5cbadb73e80d9ef6dd</id>
<content type='text'>
[ Upstream commit 6a2008641920a9c6fe1abbeb9acbec463215d505 ]

Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY
IANA allocation for IOAM", while RFC 9486 is available for some time
now. Just update the reference.

Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Signed-off-by: Justin Iurman &lt;justin.iurman@uliege.be&gt;
Reviewed-by: Simon Horman &lt;horms@kernel.org&gt;
Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>bpf: Derive source IP addr via bpf_*_fib_lookup()</title>
<updated>2024-03-01T12:35:04Z</updated>
<author>
<name>Martynas Pumputis</name>
<email>m@lambda.lt</email>
</author>
<published>2023-10-07T08:14:14Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=b96f500dbbc38ef9065a11a5e390a9c3070c2e95'/>
<id>urn:sha1:b96f500dbbc38ef9065a11a5e390a9c3070c2e95</id>
<content type='text'>
commit dab4e1f06cabb6834de14264394ccab197007302 upstream.

Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.

For example, the following snippet can be used to derive the desired
source IP address:

    struct bpf_fib_lookup p = { .ipv4_dst = ip4-&gt;daddr };

    ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
            BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
    if (ret != BPF_FIB_LKUP_RET_SUCCESS)
        return TC_ACT_SHOT;

    /* the p.ipv4_src now contains the source address */

The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.

For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.

The change was tested with Cilium [1].

Nikolay Aleksandrov helped to figure out the IPv6 addr selection.

[1]: https://github.com/cilium/cilium/pull/28283

Signed-off-by: Martynas Pumputis &lt;m@lambda.lt&gt;
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau &lt;martin.lau@kernel.org&gt;
Cc: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>netfilter: nft_compat: reject unused compat flag</title>
<updated>2024-02-16T18:10:51Z</updated>
<author>
<name>Pablo Neira Ayuso</name>
<email>pablo@netfilter.org</email>
</author>
<published>2024-02-01T22:33:29Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=b3f2e143eb306b4f23162b02a71f8efd47e3b5a7'/>
<id>urn:sha1:b3f2e143eb306b4f23162b02a71f8efd47e3b5a7</id>
<content type='text'>
[ Upstream commit 292781c3c5485ce33bd22b2ef1b2bed709b4d672 ]

Flag (1 &lt;&lt; 0) is ignored is set, never used, reject it it with EINVAL
instead.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args</title>
<updated>2024-02-01T00:19:06Z</updated>
<author>
<name>Qu Wenruo</name>
<email>wqu@suse.com</email>
</author>
<published>2024-01-09T22:28:26Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=5556a872e9e9aca4ee3f21d1d11da51c45229048'/>
<id>urn:sha1:5556a872e9e9aca4ee3f21d1d11da51c45229048</id>
<content type='text'>
commit 173431b274a9a54fc10b273b46e67f46bcf62d2e upstream.

Add extra sanity check for btrfs_ioctl_defrag_range_args::flags.

This is not really to enhance fuzzing tests, but as a preparation for
future expansion on btrfs_ioctl_defrag_range_args.

In the future we're going to add new members, allowing more fine tuning
for btrfs defrag.  Without the -ENONOTSUPP error, there would be no way
to detect if the kernel supports those new defrag features.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana &lt;fdmanana@suse.com&gt;
Signed-off-by: Qu Wenruo &lt;wqu@suse.com&gt;
Reviewed-by: David Sterba &lt;dsterba@suse.com&gt;
Signed-off-by: David Sterba &lt;dsterba@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>bpf: Add crosstask check to __bpf_get_stack</title>
<updated>2024-01-25T23:35:19Z</updated>
<author>
<name>Jordan Rome</name>
<email>jordalgo@meta.com</email>
</author>
<published>2023-11-08T11:23:34Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=a341738951bf71c19df7fb620c2f58c2ea869502'/>
<id>urn:sha1:a341738951bf71c19df7fb620c2f58c2ea869502</id>
<content type='text'>
[ Upstream commit b8e3a87a627b575896e448021e5c2f8a3bc19931 ]

Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.

This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.

It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.

Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Jordan Rome &lt;jordalgo@meta.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
<entry>
<title>fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAP</title>
<updated>2023-12-20T16:01:51Z</updated>
<author>
<name>Tyler Fanelli</name>
<email>tfanelli@redhat.com</email>
</author>
<published>2023-09-20T02:40:00Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=9f36c1c5132f3a03f420e88924b8829b508c59b8'/>
<id>urn:sha1:9f36c1c5132f3a03f420e88924b8829b508c59b8</id>
<content type='text'>
commit c55e0a55b165202f18cbc4a20650d2e1becd5507 upstream.

Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its
description indicates a purpose of reducing memory footprint. This
may imply that it could be further used to relax other DIRECT_IO
operations in the future.

Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing,
allow shared mmap of DIRECT_IO files while still bypassing the cache
on regular reads and writes.

[Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility.

Signed-off-by: Tyler Fanelli &lt;tfanelli@redhat.com&gt;
Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: &lt;stable@vger.kernel.org&gt; # v6.6
Signed-off-by: Miklos Szeredi &lt;mszeredi@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>uapi: propagate __struct_group() attributes to the container union</title>
<updated>2023-12-08T07:52:22Z</updated>
<author>
<name>Dmitry Antipov</name>
<email>dmantipov@yandex.ru</email>
</author>
<published>2023-11-20T11:05:08Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=4b81d155fe0b26c88426e0803b42aee06b7075ef'/>
<id>urn:sha1:4b81d155fe0b26c88426e0803b42aee06b7075ef</id>
<content type='text'>
[ Upstream commit 4e86f32a13af1970d21be94f659cae56bbe487ee ]

Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:

struct poorly_packed {
        unsigned int a;
        unsigned int b;
        unsigned short c;
        union {
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed));
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed)) inner;
        };
} __attribute__((packed));

To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:

struct poorly_packed {
        unsigned int a;
        unsigned int b;
        unsigned short c;
        union {
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed));
                struct {
                        unsigned short d;
                        unsigned int e;
                } __attribute__((packed)) inner;
        } __attribute__((packed));
} __attribute__((packed));

Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.

Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com
Signed-off-by: Dmitry Antipov &lt;dmantipov@yandex.ru&gt;
Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru
Fixes: 50d7bd38c3aa ("stddef: Introduce struct_group() helper macro")
Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
</entry>
</feed>
