user/sven/linux.git/include/uapi, branch v3.16.42

usb: add helper to extract bits 12:11 of wMaxPacketSize

2017-03-16T02:26:17Z

commit 541b6fe63023f3059cf85d47ff2767a3e42a8e44 upstream. According to USB Specification 2.0 table 9-4, wMaxPacketSize is a bitfield. Endpoint's maxpacket is laid out in bits 10:0. For high-speed, high-bandwidth isochronous endpoints, bits 12:11 contain a multiplier to tell us how many transactions we want to try per uframe. This means that if we want an isochronous endpoint to issue 3 transfers of 1024 bytes per uframe, wMaxPacketSize should contain the value: 1024 | (2 << 11) or 5120 (0x1400). In order to make Host and Peripheral controller drivers' life easier, we're adding a helper which returns bits 12:11. Note that no care is made WRT to checking endpoint type and gadget's speed. That's left for drivers to handle. Signed-off-by: Felipe Balbi Signed-off-by: Ben Hutchings

can: raw: raw_setsockopt: limit number of can_filter that can be set

2017-02-23T03:54:43Z

commit 332b05ca7a438f857c61a3c21a88489a21532364 upstream. This patch adds a check to limit the number of can_filters that can be set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER are not prevented resulting in a warning. Reference: https://lkml.org/lkml/2016/12/2/230 Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Marc Kleine-Budde Signed-off-by: Ben Hutchings

net/ipv6: add sysctl option accept_ra_min_hop_limit

2016-03-24T09:59:05Z

commit 8013d1d7eafb0589ca766db6b74026f76b7f5cb4 upstream. Commit 6fd99094de2b ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by: Hangbin Liu Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller [ luis: backported to 3.16: - added missing DEVCONF_* as suggested by Yoshfuji so that uapi contains the same values as mainline - adjusted context ] Signed-off-by: Luis Henriques

PCI: Restore PCI_MSIX_FLAGS_BIRMASK definition

2015-08-27T11:08:04Z

commit c9ddbac9c89110f77cb0fa07e634aaf1194899aa upstream. 09a2c73ddfc7 ("PCI: Remove unused PCI_MSIX_FLAGS_BIRMASK definition") removed PCI_MSIX_FLAGS_BIRMASK from an exported header because it was unused in the kernel. But that breaks user programs that were using it (QEMU in particular). Restore the PCI_MSIX_FLAGS_BIRMASK definition. [bhelgaas: changelog] Signed-off-by: Michael S. Tsirkin Signed-off-by: Bjorn Helgaas Signed-off-by: Luis Henriques

xdrm/i915: Use two 32bit reads for select 64bit REG_READ ioctls

2015-08-11T08:57:37Z

commit 648a9bc5308d952f2c80772301b339f73026f013 upstream. Since the hardware sometimes mysteriously totally flummoxes the 64bit read of a 64bit register when read using a single instruction, split the read into two instructions. Since the read here is of automatically incrementing timestamp counters, we also have to be very careful in order to make sure that it does not increment between the two instructions. However, since userspace tried to workaround this issue and so enshrined this ABI for a broken hardware read and in the process neglected that the read only fails in some environments, we have to introduce a new uABI flag for userspace to request the 2x32 bit accurate read of the timestamp. v2: Fix alignment check and include details of the workaround for userspace. Reported-by: Karol Herbst Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91317 Testcase: igt/gem_reg_read Signed-off-by: Chris Wilson Cc: Michał Winiarski Tested-by: Michał Winiarski Signed-off-by: Daniel Vetter [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques

USB: usbfs: allow URBs to be reaped after disconnection

2015-08-11T08:57:29Z

commit 3f2cee73b650921b2e214bf487b2061a1c266504 upstream. The usbfs API has a peculiar hole: Users are not allowed to reap their URBs after the device has been disconnected. There doesn't seem to be any good reason for this; it is an ad-hoc inconsistency. The patch allows users to issue the USBDEVFS_REAPURB and USBDEVFS_REAPURBNDELAY ioctls (together with their 32-bit counterparts on 64-bit systems) even after the device is gone. If no URBs are pending for a disconnected device then the ioctls will return -ENODEV rather than -EAGAIN, because obviously no new URBs will ever be able to complete. The patch also adds a new capability flag for USBDEVFS_GET_CAPABILITIES to indicate that the reap-after-disconnect feature is supported. Signed-off-by: Alan Stern Tested-by: Chris Dickens Acked-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman Signed-off-by: Luis Henriques

powerpc: add little endian flag to syscall_get_arch()

2015-02-10T13:38:43Z

commit 63f13448d81c910a284b096149411a719cbed501 upstream. Since both ppc and ppc64 have LE variants which are now reported by uname, add that flag (__AUDIT_ARCH_LE) to syscall_get_arch() and add AUDIT_ARCH_PPC64LE variant. Without this, perf trace and auditctl fail. Mainline kernel reports ppc64le (per a058801) but there is no matching AUDIT_ARCH_PPC64LE. Since 32-bit PPC LE is not supported by audit, don't advertise it in AUDIT_ARCH_PPC* variants. See: https://www.redhat.com/archives/linux-audit/2014-August/msg00082.html https://www.redhat.com/archives/linux-audit/2014-December/msg00004.html Signed-off-by: Richard Guy Briggs Acked-by: Paul Moore Signed-off-by: Michael Ellerman [bwh: Backported to 3.16: arch is passed in by do_syscall_trace_enter() rather than queried by calling syscall_get_arch()] Signed-off-by: Ben Hutchings Tested-by: Michael Ellerman Signed-off-by: Luis Henriques

in6: fix conflict with glibc

2015-01-19T11:19:05Z

commit 6d08acd2d32e3e877579315dc3202d7a5f336d98 upstream. Resolve conflicts between glibc definition of IPV6 socket options and those defined in Linux headers. Looks like earlier efforts to solve this did not cover all the definitions. It resolves warnings during iproute2 build. Please consider for stable as well. Signed-off-by: Stephen Hemminger Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Luis Henriques

Drivers: hv: util: make struct hv_do_fcopy match Hyper-V host messages

2015-01-05T13:48:38Z

commit 31d4ea1a093fcf668d5f95af44b8d41488bdb7ec upstream. An attempt to fix fcopy on i586 (bc5a5b0 Drivers: hv: util: Properly pack the data for file copy functionality) led to a regression on x86_64 (and actually didn't fix i586 breakage). Fcopy messages from Hyper-V host come in the following format: struct do_fcopy_hdr | 36 bytes 0000 | 4 bytes offset | 8 bytes size | 4 bytes data | 6144 bytes On x86_64 struct hv_do_fcopy matched this format without ' __attribute__((packed))' and on i586 adding ' __attribute__((packed))' to it doesn't change anything. Keep the structure packed and add padding to match re reality. Tested both i586 and x86_64 on Hyper-V Server 2012 R2. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman Signed-off-by: Luis Henriques

netfilter: xt_bpf: add mising opaque struct sk_filter definition

2014-11-27T11:22:07Z

commit e10038a8ec06ac819b7552bb67aaa6d2d6f850c1 upstream. This structure is not exposed to userspace, so fix this by defining struct sk_filter; so we skip the casting in kernelspace. This is safe since userspace has no way to lurk with that internal pointer. Fixes: e6f30c7 ("netfilter: x_tables: add xt_bpf match") Signed-off-by: Pablo Neira Ayuso Acked-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Luis Henriques