user/sven/linux.git/include/uapi, branch v4.14.240

icmp: don't send out ICMP messages with a source address of 0.0.0.0

2021-06-30T12:48:51Z

[ Upstream commit 321827477360934dc040e9d3c626bf1de6c3ab3c ] When constructing ICMP response messages, the kernel will try to pick a suitable source address for the outgoing packet. However, if no IPv4 addresses are configured on the system at all, this will fail and we end up producing an ICMP message with a source address of 0.0.0.0. This can happen on a box routing IPv4 traffic via v6 nexthops, for instance. Since 0.0.0.0 is not generally routable on the internet, there's a good chance that such ICMP messages will never make it back to the sender of the original packet that the ICMP message was sent in response to. This, in turn, can create connectivity and PMTUd problems for senders. Fortunately, RFC7600 reserves a dummy address to be used as a source for ICMP messages (192.0.0.8/32), so let's teach the kernel to substitute that address as a last resort if the regular source address selection procedure fails. Below is a quick example reproducing this issue with network namespaces: ip netns add ns0 ip l add type veth peer netns ns0 ip l set dev veth0 up ip a add 10.0.0.1/24 dev veth0 ip a add fc00:dead:cafe:42::1/64 dev veth0 ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2 ip -n ns0 l set dev veth0 up ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0 ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1 ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0 ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1 tcpdump -tpni veth0 -c 2 icmp & ping -w 1 10.1.0.1 > /dev/null tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64 IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 2 packets captured 2 packets received by filter 0 packets dropped by kernel With this patch the above capture changes to: IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64 IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Juliusz Chroboczek Reviewed-by: David Ahern Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

tty: actually undefine superseded ASYNC flags

2021-05-22T08:57:29Z

[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ] Some kernel-internal ASYNC flags have been superseded by tty-port flags and should no longer be used by kernel drivers. Fix the misspelled "__KERNEL__" compile guards which failed their sole purpose to break out-of-tree drivers that have not yet been updated. Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

net/ncsi: Add generic netlink family

2021-04-16T09:57:51Z

commit 955dc68cb9b23b42999cafe6df3684309bc686c6 upstream. Add a generic netlink family for NCSI. This supports three commands; NCSI_CMD_PKG_INFO which returns information on packages and their associated channels, NCSI_CMD_SET_INTERFACE which allows a specific package or package/channel combination to be set as the preferred choice, and NCSI_CMD_CLEAR_INTERFACE which clears any preferred setting. Signed-off-by: Samuel Mendoza-Jonas Signed-off-by: David S. Miller Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

USB: replace hardcode maximum usb string length by definition

2021-03-24T10:05:02Z

commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream. Replace hardcoded maximum USB string length (126 bytes) by definition "USB_MAX_STRING_LEN". Signed-off-by: Macpaul Lin Acked-by: Alan Stern Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman

uapi: nfnetlink_cthelper.h: fix userspace compilation error

2021-03-17T15:34:27Z

commit c33cb0020ee6dd96cc9976d6085a7d8422f6dbed upstream. Apparently, and could not be included into the same compilation unit because of a cut-and-paste typo in the former header. Fixes: 12f7a505331e6 ("netfilter: add user-space connection tracking helper infrastructure") Cc: # v3.6 Signed-off-by: Dmitry V. Levin Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

uapi: move constants from to

2021-01-09T12:37:37Z

commit a85cbe6159ffc973e5702f70a3bd5185f8f3c38d upstream. and include in UAPI headers instead of . The reason is to avoid indirect include when using some network headers: or others -> -> . This indirect include causes on MUSL redefinition of struct sysinfo when included both and some of UAPI headers: In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5, from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5, from ../include/tst_netlink.h:14, from tst_crypto.c:13: x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo' struct sysinfo { ^~~~~~~ In file included from ../include/tst_safe_macros.h:15, from ../include/tst_test.h:93, from tst_crypto.c:11: x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com Signed-off-by: Petr Vorel Suggested-by: Rich Felker Acked-by: Rich Felker Cc: Peter Korsgaard Cc: Baruch Siach Cc: Florian Weimer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

crypto: af_alg - avoid undefined behavior accessing salg_name

2020-12-29T12:46:50Z

commit 92eb6c3060ebe3adf381fd9899451c5b047bb14d upstream. Commit 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") made the kernel start accepting arbitrarily long algorithm names in sockaddr_alg. However, the actual length of the salg_name field stayed at the original 64 bytes. This is broken because the kernel can access indices >= 64 in salg_name, which is undefined behavior -- even though the memory that is accessed is still located within the sockaddr structure. It would only be defined behavior if the array were properly marked as arbitrary-length (either by making it a flexible array, which is the recommended way these days, or by making it an array of length 0 or 1). We can't simply change salg_name into a flexible array, since that would break source compatibility with userspace programs that embed sockaddr_alg into another struct, or (more commonly) declare a sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'. One solution would be to change salg_name into a flexible array only when '#ifdef __KERNEL__'. However, that would keep userspace without an easy way to actually use the longer algorithm names. Instead, add a new structure 'sockaddr_alg_new' that has the flexible array field, and expose it to both userspace and the kernel. Make the kernel use it correctly in alg_bind(). This addresses the syzbot report "UBSAN: array-index-out-of-bounds in alg_bind" (https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e). Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com Fixes: 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") Cc: # v4.12+ Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

wireless: Use linux/stddef.h instead of stddef.h

2020-12-02T07:34:39Z

commit 1b9ae0c92925ac40489be526d67d0010d0724ce0 upstream. When compiling inside the kernel include linux/stddef.h instead of stddef.h. When I compile this header file in backports for power PC I run into a conflict with ptrdiff_t. I was unable to reproduce this in mainline kernel. I still would like to fix this problem in the kernel. Fixes: 6989310f5d43 ("wireless: Use offsetof instead of custom macro.") Signed-off-by: Hauke Mehrtens Link: https://lore.kernel.org/r/20200521201422.16493-1-hauke@hauke-m.de Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag

2020-11-05T10:07:02Z

commit 8c39076c276be0b31982e44654e2c2357473258a upstream. RFC 7862 introduced a new flag that either client or server is allowed to set: EXCHGID4_FLAG_SUPP_FENCE_OPS. Client needs to update its bitmask to allow for this flag value. v2: changed minor version argument to unsigned int Signed-off-by: Olga Kornievskaia CC: Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman

media: videodev2.h: RGB BT2020 and HSV are always full range

2020-11-05T10:06:54Z

[ Upstream commit b305dfe2e93434b12d438434461b709641f62af4 ] The default RGB quantization range for BT.2020 is full range (just as for all the other RGB pixel encodings), not limited range. Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation accordingly. Also mention that HSV is always full range and cannot be limited range. When RGB BT2020 was introduced in V4L2 it was not clear whether it should be limited or full range, but full range is the right (and consistent) choice. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin