user/sven/linux.git/include/uapi, branch v4.14.259

PCI: Add PCI_EXP_LNKCTL2_TLS* macros

2021-12-08T07:46:51Z

commit c80851f6ce63a6e313f8c7b4b6eb82c67aa4497b upstream. The Link Control 2 register is missing macros for Target Link Speeds. Add those in. Signed-off-by: Frederick Lawler [bhelgaas: use "GT" instead of "GB"] Signed-off-by: Bjorn Helgaas Signed-off-by: Marek Behún Signed-off-by: Greg Kroah-Hartman

PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros

2021-11-26T10:40:37Z

commit 460275f124fb072dca218a6b43b6370eebbab20d upstream. Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*. Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.org Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Lorenzo Pieralisi Reviewed-by: Marek Behún Reviewed-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

serial: 8250: Define RX trigger levels for OxSemi 950 devices

2021-09-22T09:45:29Z

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ] Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

icmp: don't send out ICMP messages with a source address of 0.0.0.0

2021-06-30T12:48:51Z

[ Upstream commit 321827477360934dc040e9d3c626bf1de6c3ab3c ] When constructing ICMP response messages, the kernel will try to pick a suitable source address for the outgoing packet. However, if no IPv4 addresses are configured on the system at all, this will fail and we end up producing an ICMP message with a source address of 0.0.0.0. This can happen on a box routing IPv4 traffic via v6 nexthops, for instance. Since 0.0.0.0 is not generally routable on the internet, there's a good chance that such ICMP messages will never make it back to the sender of the original packet that the ICMP message was sent in response to. This, in turn, can create connectivity and PMTUd problems for senders. Fortunately, RFC7600 reserves a dummy address to be used as a source for ICMP messages (192.0.0.8/32), so let's teach the kernel to substitute that address as a last resort if the regular source address selection procedure fails. Below is a quick example reproducing this issue with network namespaces: ip netns add ns0 ip l add type veth peer netns ns0 ip l set dev veth0 up ip a add 10.0.0.1/24 dev veth0 ip a add fc00:dead:cafe:42::1/64 dev veth0 ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2 ip -n ns0 l set dev veth0 up ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0 ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1 ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0 ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1 tcpdump -tpni veth0 -c 2 icmp & ping -w 1 10.1.0.1 > /dev/null tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64 IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 2 packets captured 2 packets received by filter 0 packets dropped by kernel With this patch the above capture changes to: IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64 IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Juliusz Chroboczek Reviewed-by: David Ahern Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

tty: actually undefine superseded ASYNC flags

2021-05-22T08:57:29Z

[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ] Some kernel-internal ASYNC flags have been superseded by tty-port flags and should no longer be used by kernel drivers. Fix the misspelled "__KERNEL__" compile guards which failed their sole purpose to break out-of-tree drivers that have not yet been updated. Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

net/ncsi: Add generic netlink family

2021-04-16T09:57:51Z

commit 955dc68cb9b23b42999cafe6df3684309bc686c6 upstream. Add a generic netlink family for NCSI. This supports three commands; NCSI_CMD_PKG_INFO which returns information on packages and their associated channels, NCSI_CMD_SET_INTERFACE which allows a specific package or package/channel combination to be set as the preferred choice, and NCSI_CMD_CLEAR_INTERFACE which clears any preferred setting. Signed-off-by: Samuel Mendoza-Jonas Signed-off-by: David S. Miller Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

USB: replace hardcode maximum usb string length by definition

2021-03-24T10:05:02Z

commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream. Replace hardcoded maximum USB string length (126 bytes) by definition "USB_MAX_STRING_LEN". Signed-off-by: Macpaul Lin Acked-by: Alan Stern Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman

uapi: nfnetlink_cthelper.h: fix userspace compilation error

2021-03-17T15:34:27Z

commit c33cb0020ee6dd96cc9976d6085a7d8422f6dbed upstream. Apparently, and could not be included into the same compilation unit because of a cut-and-paste typo in the former header. Fixes: 12f7a505331e6 ("netfilter: add user-space connection tracking helper infrastructure") Cc: # v3.6 Signed-off-by: Dmitry V. Levin Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

uapi: move constants from to

2021-01-09T12:37:37Z

commit a85cbe6159ffc973e5702f70a3bd5185f8f3c38d upstream. and include in UAPI headers instead of . The reason is to avoid indirect include when using some network headers: or others -> -> . This indirect include causes on MUSL redefinition of struct sysinfo when included both and some of UAPI headers: In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5, from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5, from ../include/tst_netlink.h:14, from tst_crypto.c:13: x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo' struct sysinfo { ^~~~~~~ In file included from ../include/tst_safe_macros.h:15, from ../include/tst_test.h:93, from tst_crypto.c:11: x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com Signed-off-by: Petr Vorel Suggested-by: Rich Felker Acked-by: Rich Felker Cc: Peter Korsgaard Cc: Baruch Siach Cc: Florian Weimer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

crypto: af_alg - avoid undefined behavior accessing salg_name

2020-12-29T12:46:50Z

commit 92eb6c3060ebe3adf381fd9899451c5b047bb14d upstream. Commit 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") made the kernel start accepting arbitrarily long algorithm names in sockaddr_alg. However, the actual length of the salg_name field stayed at the original 64 bytes. This is broken because the kernel can access indices >= 64 in salg_name, which is undefined behavior -- even though the memory that is accessed is still located within the sockaddr structure. It would only be defined behavior if the array were properly marked as arbitrary-length (either by making it a flexible array, which is the recommended way these days, or by making it an array of length 0 or 1). We can't simply change salg_name into a flexible array, since that would break source compatibility with userspace programs that embed sockaddr_alg into another struct, or (more commonly) declare a sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'. One solution would be to change salg_name into a flexible array only when '#ifdef __KERNEL__'. However, that would keep userspace without an easy way to actually use the longer algorithm names. Instead, add a new structure 'sockaddr_alg_new' that has the flexible array field, and expose it to both userspace and the kernel. Make the kernel use it correctly in alg_bind(). This addresses the syzbot report "UBSAN: array-index-out-of-bounds in alg_bind" (https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e). Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com Fixes: 3f69cc60768b ("crypto: af_alg - Allow arbitrarily long algorithm names") Cc: # v4.12+ Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman