user/sven/linux.git/include/uapi, branch v4.4.143

cfg80211: further limit wiphy names to 64 bytes

2018-06-06T14:46:21Z

commit 814596495dd2b9d4aab92d8f89cf19060d25d2ea upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by: Eric Biggers Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off

2018-05-30T05:49:05Z

[ Upstream commit 4bbb3e0e8239f9079bf1fe20b3c0cb598714ae61 ] When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by: Brandon Carpenter Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

virtio-gpu: fix ioctl and expose the fixed status to userspace.

2018-05-30T05:49:02Z

[ Upstream commit 9a191b114906457c4b2494c474f58ae4142d4e67 ] This exposes to mesa that it can use the fixed ioctl for querying later cap sets, cap set 1 is forever frozen in time. Signed-off-by: Dave Airlie Link: http://patchwork.freedesktop.org/patch/msgid/20180221015003.22884-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

cfg80211: limit wiphy names to 128 bytes

2018-05-26T06:49:00Z

commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream. There's currently no limit on wiphy names, other than netlink message size and memory limitations, but that causes issues when, for example, the wiphy name is used in a uevent, e.g. in rfkill where we use the same name for the rfkill instance, and then the buffer there is "only" 2k for the environment variables. This was reported by syzkaller, which used a 4k name. Limit the name to something reasonable, I randomly picked 128. Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

KVM: s390: wire up bpb feature

2018-04-29T05:50:02Z

[ Upstream commit 35b3fde6203b932b2b1a5b53b3d8808abc9c4f60 ] The new firmware interfaces for branch prediction behaviour changes are transparently available for the guest. Nevertheless, there is new state attached that should be migrated and properly resetted. Provide a mechanism for handling reset, migration and VSIE. Signed-off-by: Christian Borntraeger Reviewed-by: David Hildenbrand Reviewed-by: Cornelia Huck [Changed capability number to 152. - Radim] Signed-off-by: Radim Krčmář Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constant

2018-04-08T09:51:57Z

commit 76dc52684d0f72971d9f6cc7d5ae198061b715bd upstream. A 64-bit value is not needed since a PCI ROM address consists in 32 bits. This fixes a clang warning about "implicit conversion from 'unsigned long' to 'u32'". Also remove now unnecessary casts to u32 from __pci_read_base() and pci_std_update_resource(). Signed-off-by: Matthias Kaehlcke Signed-off-by: Bjorn Helgaas Cc: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit

2018-03-28T16:40:12Z

commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream. Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

eventpoll.h: add missing epoll event masks

2018-01-31T11:06:12Z

commit 7e040726850a106587485c21bdacc0bfc8a0cbed upstream. [resend due to me forgetting to cc: linux-api the first time around I posted these back on Feb 23] From: Greg Kroah-Hartman For some reason these values are not in the uapi header file, so any libc has to define it themselves. To prevent them from needing to do this, just have the kernel provide the correct values. Reported-by: Elliott Hughes Signed-off-by: Greg Hackmann Signed-off-by: Greg Kroah-Hartman

USB: core: Add type-specific length check of BOS descriptors

2017-12-09T17:42:44Z

commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream. As most of BOS descriptors are longer in length than their header 'struct usb_dev_cap_header', comparing solely with it is not sufficient to avoid out-of-bounds access to BOS descriptors. This patch adds descriptor type specific length check in usb_get_bos_descriptor() to fix the issue. Signed-off-by: Masakazu Mokuno Signed-off-by: Greg Kroah-Hartman

usb: ch9: Add size macro for SSP dev cap descriptor

2017-12-09T17:42:44Z

commit 446fa3a95df1e8b78f25e1babc41e46edd200821 upstream. The SuperspeedPlus Device Capability Descriptor has a variable size depending on the number of sublink speed attributes. This patch adds a macro to calculate that size. The macro takes one argument, the Sublink Speed Attribute Count (SSAC) as reported by the descriptor in bmAttributes[4:0]. See USB 3.1 9.6.2.5, Table 9-19. Signed-off-by: John Youn Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman