user/sven/linux.git/include/uapi, branch v5.10.76

fq_codel: reject silly quantum parameters

2021-09-22T10:28:05Z

[ Upstream commit c7c5e6ff533fe1f9afef7d2fa46678987a1335a7 ] syzbot found that forcing a big quantum attribute would crash hosts fast, essentially using this: tc qd replace dev eth0 root fq_codel quantum 4294967295 This is because fq_codel_dequeue() would have to loop ~2^31 times in : if (flow->deficit <= 0) { flow->deficit += q->quantum; list_move_tail(&flow->flowchain, &q->old_flows); goto begin; } SFQ max quantum is 2^19 (half a megabyte) Lets adopt a max quantum of one megabyte for FQ_CODEL. Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

serial: 8250: Define RX trigger levels for OxSemi 950 devices

2021-09-18T11:40:22Z

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ] Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

bpf: Fix a typo of reuseport map in bpf.h.

2021-09-15T07:50:31Z

[ Upstream commit f170acda7ffaf0473d06e1e17c12cd9fd63904f5 ] Fix s/BPF_MAP_TYPE_REUSEPORT_ARRAY/BPF_MAP_TYPE_REUSEPORT_SOCKARRAY/ typo in bpf.h. Fixes: 2dbb9b9e6df6 ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by: Kuniyuki Iwashima Signed-off-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20210714124317.67526-1-kuniyu@amazon.co.jp Signed-off-by: Sasha Levin

tty: drop termiox user definitions

2021-09-12T06:58:27Z

commit c762a2b846b619c0f92f23e2e8e16f70d20df800 upstream. As was concluded in a follow-up discussion of commit e0efb3168d34 (tty: Remove dead termiox code) [1], termiox ioctls never worked, so there is barely anyone using this interface. We can safely remove the user definitions for this never adopted interface. [1] https://lore.kernel.org/lkml/c1c9fc04-02eb-2260-195b-44c357f057c0@kernel.org/t/#u Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210105120239.28031-12-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

net: bridge: fix flags interpretation for extern learn fdb entries

2021-08-18T06:59:13Z

[ Upstream commit 45a687879b31caae4032abd1c2402e289d2b8083 ] Ignore fdb flags when adding port extern learn entries and always set BR_FDB_LOCAL flag when adding bridge extern learn entries. This is closest to the behaviour we had before and avoids breaking any use cases which were allowed. This patch fixes iproute2 calls which assume NUD_PERMANENT and were allowed before, example: $ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn Extern learn entries are allowed to roam, but do not expire, so static or dynamic flags make no sense for them. Also add a comment for future reference. Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Fixes: 0541a6293298 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry") Reviewed-by: Ido Schimmel Tested-by: Ido Schimmel Signed-off-by: Nikolay Aleksandrov Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20210810110010.43859-1-razor@blackwall.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: fix mistake path for netdev_features_strings

2021-07-19T07:44:51Z

[ Upstream commit 2d8ea148e553e1dd4e80a87741abdfb229e2b323 ] Th_strings arrays netdev_features_strings, tunable_strings, and phy_tunable_strings has been moved to file net/ethtool/common.c. So fixes the comment. Signed-off-by: Jian Shen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

icmp: don't send out ICMP messages with a source address of 0.0.0.0

2021-06-23T12:42:47Z

[ Upstream commit 321827477360934dc040e9d3c626bf1de6c3ab3c ] When constructing ICMP response messages, the kernel will try to pick a suitable source address for the outgoing packet. However, if no IPv4 addresses are configured on the system at all, this will fail and we end up producing an ICMP message with a source address of 0.0.0.0. This can happen on a box routing IPv4 traffic via v6 nexthops, for instance. Since 0.0.0.0 is not generally routable on the internet, there's a good chance that such ICMP messages will never make it back to the sender of the original packet that the ICMP message was sent in response to. This, in turn, can create connectivity and PMTUd problems for senders. Fortunately, RFC7600 reserves a dummy address to be used as a source for ICMP messages (192.0.0.8/32), so let's teach the kernel to substitute that address as a last resort if the regular source address selection procedure fails. Below is a quick example reproducing this issue with network namespaces: ip netns add ns0 ip l add type veth peer netns ns0 ip l set dev veth0 up ip a add 10.0.0.1/24 dev veth0 ip a add fc00:dead:cafe:42::1/64 dev veth0 ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2 ip -n ns0 l set dev veth0 up ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0 ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1 ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0 ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1 tcpdump -tpni veth0 -c 2 icmp & ping -w 1 10.1.0.1 > /dev/null tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64 IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 2 packets captured 2 packets received by filter 0 packets dropped by kernel With this patch the above capture changes to: IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64 IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Juliusz Chroboczek Reviewed-by: David Ahern Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

HID: hid-input: add mapping for emoji picker key

2021-06-18T08:00:03Z

[ Upstream commit 7b229b13d78d112e2c5d4a60a3c6f602289959fa ] HUTRR101 added a new usage code for a key that is supposed to invoke and dismiss an emoji picker widget to assist users to locate and enter emojis. This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9 usage code to this new keycode. Additionally hid-debug is adjusted to recognize this new usage code as well. Signed-off-by: Dmitry Torokhov Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

netfilter: xt_SECMARK: add new revision to fix structure layout

2021-05-19T08:13:06Z

[ Upstream commit c7d13358b6a2f49f81a34aa323a2d0878a0532a2 ] This extension breaks when trying to delete rules, add a new revision to fix this. Fixes: 5e6874cdb8de ("[SECMARK]: Add xtables SECMARK target") Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

f2fs: move ioctl interface definitions to separated file

2021-05-19T08:13:00Z

[ Upstream commit fa4320cefb8537a70cc28c55d311a1f569697cd3 ] Like other filesystem does, we introduce a new file f2fs.h in path of include/uapi/linux/, and move f2fs-specified ioctl interface definitions to that file, after then, in order to use those definitions, userspace developer only need to include the new header file rather than copy & paste definitions from fs/f2fs/f2fs.h. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin