user/sven/linux.git/include/uapi, branch v6.1.59

netlink: remove the flex array from struct nlmsghdr

2023-10-10T20:00:46Z

commit c73a72f4cbb47672c8cc7f7d7aba52f1cb15baca upstream. I've added a flex array to struct nlmsghdr in commit 738136a0e375 ("netlink: split up copies in the ack construction") to allow accessing the data easily. It leads to warnings with clang, if user space wraps this structure into another struct and the flex array is not at the end of the container. Reviewed-by: Kees Cook Reviewed-by: David Ahern Link: https://lore.kernel.org/all/20221114023927.GA685@u2004-local/ Link: https://lore.kernel.org/r/20221118033903.1651026-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

netlink: split up copies in the ack construction

2023-10-10T20:00:44Z

[ Upstream commit 738136a0e3757a8534df3ad97d6ff6d7f429f6c1 ] Clean up the use of unsafe_memcpy() by adding a flexible array at the end of netlink message header and splitting up the header and data copies. Reviewed-by: Kees Cook Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller Stable-dep-of: d0f95894fda7 ("netlink: annotate data-races around sk->sk_err") Signed-off-by: Sasha Levin

bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup

2023-10-10T20:00:42Z

[ Upstream commit 31de4105f00d64570139bc5494a201b0bd57349f ] The bpf_fib_lookup() also looks up the neigh table. This was done before bpf_redirect_neigh() was added. In the use case that does not manage the neigh table and requires bpf_fib_lookup() to lookup a fib to decide if it needs to redirect or not, the bpf prog can depend only on using bpf_redirect_neigh() to lookup the neigh. It also keeps the neigh entries fresh and connected. This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid the double neigh lookup when the bpf prog always call bpf_redirect_neigh() to do the neigh lookup. The params->smac output is skipped together when SKIP_NEIGH is set because bpf_redirect_neigh() will figure out the smac also. Signed-off-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev Stable-dep-of: 5baa0433a15e ("neighbour: fix data-races around n->output") Signed-off-by: Sasha Levin

net: change accept_ra_min_rtr_lft to affect all RA lifetimes

2023-10-10T20:00:37Z

commit 5027d54a9c30bc7ec808360378e2b4753f053f25 upstream. accept_ra_min_rtr_lft only considered the lifetime of the default route and discarded entire RAs accordingly. This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and applies the value to individual RA sections; in particular, router lifetime, PIO preferred lifetime, and RIO lifetime. If any of those lifetimes are lower than the configured value, the specific RA section is ignored. In order for the sysctl to be useful to Android, it should really apply to all lifetimes in the RA, since that is what determines the minimum frequency at which RAs must be processed by the kernel. Android uses hardware offloads to drop RAs for a fraction of the minimum of all lifetimes present in the RA (some networks have very frequent RAs (5s) with high lifetimes (2h)). Despite this, we have encountered networks that set the router lifetime to 30s which results in very frequent CPU wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the WiFi firmware) entirely on such networks, it seems better to ignore the misconfigured routers while still processing RAs from other IPv6 routers on the same network (i.e. to support IoT applications). The previous implementation dropped the entire RA based on router lifetime. This turned out to be hard to expand to the other lifetimes present in the RA in a consistent manner; dropping the entire RA based on RIO/PIO lifetimes would essentially require parsing the whole thing twice. Fixes: 1671bcfd76fd ("net: add sysctl accept_ra_min_rtr_lft") Cc: Lorenzo Colitti Signed-off-by: Patrick Rohr Reviewed-by: Maciej Żenczykowski Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: add sysctl accept_ra_min_rtr_lft

2023-10-10T20:00:36Z

commit 1671bcfd76fdc0b9e65153cf759153083755fe4c upstream. This change adds a new sysctl accept_ra_min_rtr_lft to specify the minimum acceptable router lifetime in an RA. If the received RA router lifetime is less than the configured value (and not 0), the RA is ignored. This is useful for mobile devices, whose battery life can be impacted by networks that configure RAs with a short lifetime. On such networks, the device should never gain IPv6 provisioning and should attempt to drop RAs via hardware offload, if available. Signed-off-by: Patrick Rohr Cc: Maciej Żenczykowski Cc: Lorenzo Colitti Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bpf: Clarify error expectations from bpf_clone_redirect

2023-10-06T12:56:55Z

[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ] Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") exposed the fact that bpf_clone_redirect is capable of returning raw NET_XMIT_XXX return codes. This is in the conflict with its UAPI doc which says the following: "0 on success, or a negative error in case of failure." Update the UAPI to reflect the fact that bpf_clone_redirect can return positive error numbers, but don't explicitly define their meaning. Reported-by: Daniel Borkmann Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com Signed-off-by: Sasha Levin

netfilter: ebtables: fix fortify warnings in size_entry_mwt()

2023-09-23T09:11:03Z

[ Upstream commit a7ed3465daa240bdf01a5420f64336fee879c09d ] When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following warning appears: In function ‘fortify_memcpy_chk’, inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2: ./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning] 592 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The compiler is complaining: memcpy(&offsets[1], &entry->watchers_offset, sizeof(offsets) - sizeof(offsets[0])); where memcpy reads beyong &entry->watchers_offset to copy {watchers,target,next}_offset altogether into offsets[]. Silence the warning by wrapping these three up via struct_group(). Signed-off-by: GONG, Ruiqi Reviewed-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin

dma-buf/sync_file: Fix docs syntax

2023-09-13T07:42:53Z

[ Upstream commit 05d56d8079d510a2994039470f65bea85f0075ee ] Fixes the warning: include/uapi/linux/sync_file.h:77: warning: Function parameter or member 'num_fences' not described in 'sync_file_info' Fixes: 2d75c88fefb2 ("staging/android: refactor SYNC IOCTLs") Signed-off-by: Rob Clark Reviewed-by: Randy Dunlap Link: https://lore.kernel.org/r/20230724145000.125880-1-robdclark@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

media: uapi: HEVC: Add num_delta_pocs_of_ref_rps_idx field

2023-09-13T07:42:20Z

[ Upstream commit ae440c5da33cdb90a109f2df2a0360c67b3fab7e ] Some drivers firmwares parse by themselves slice header and need num_delta_pocs_of_ref_rps_idx value to parse slice header short_term_ref_pic_set(). Use one of the 4 reserved bytes to store this value without changing the v4l2_ctrl_hevc_decode_params structure size and padding. This value also exist in DXVA API. Signed-off-by: Benjamin Gaignard Signed-off-by: Yunfei Dong Reviewed-by: Nicolas Dufresne Signed-off-by: Hans Verkuil [hverkuil: fix typo in num_delta_pocs_of_ref_rps_idx doc] Stable-dep-of: 297160d411e3 ("media: mediatek: vcodec: move core context from device to each instance") Signed-off-by: Sasha Levin

block: Fix a source code comment in include/uapi/linux/blkzoned.h

2023-08-03T08:24:04Z

[ Upstream commit e0933b526fbfd937c4a8f4e35fcdd49f0e22d411 ] Fix the symbolic names for zone conditions in the blkzoned.h header file. Cc: Hannes Reinecke Cc: Damien Le Moal Fixes: 6a0cb1bc106f ("block: Implement support for zoned block devices") Signed-off-by: Bart Van Assche Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20230706201422.3987341-1-bvanassche@acm.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin