user/sven/linux.git/include/uapi, branch v6.1.90

PCI/DPC: Use FIELD_GET()

2024-04-27T15:07:11Z

[ Upstream commit 9a9eec4765737b9b2a8d6ae03de6480a5f12dd5c ] Use FIELD_GET() to remove dependencies on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

Input: allocate keycode for Display refresh rate toggle

2024-04-13T11:05:14Z

[ Upstream commit cfeb98b95fff25c442f78a6f616c627bc48a26b7 ] Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event when Fn + R is pressed. This is intended for use to switch between the two refresh rates. Allocate a new KEY_REFRESH_RATE_TOGGLE keycode for it. Signed-off-by: Gergo Koteles Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/15a5d08c84cf4d7b820de34ebbcf8ae2502fb3ca.1710065750.git.soyer@irl.hu Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin

RDMA/irdma: Allow accurate reporting on QP max send/recv WR

2024-03-26T22:20:53Z

[ Upstream commit 3a8498720450174b8db450d3375a04dca81b3534 ] Currently the attribute cap.max_send_wr and cap.max_recv_wr sent from user-space during create QP are the provider computed SQ/RQ depth as opposed to raw values passed from application. This inhibits computation of an accurate value for max_send_wr and max_recv_wr for this QP in the kernel which matches the value returned in user create QP. Also these capabilities needs to be reported from the driver in query QP. Add support by extending the ABI to allow the raw cap.max_send_wr and cap.max_recv_wr to be passed from user-space, while keeping compatibility for the older scheme. The internal HW depth and shift needed for the WQs needs to be computed now for both kernel and user-mode QPs. Add new helpers to assist with this: irdma_uk_calc_depth_shift_sq, irdma_uk_calc_depth_shift_rq and irdma_uk_calc_depth_shift_wq. Consolidate all the user mode QP setup into a new function irdma_setup_umode_qp which keeps it with its counterpart irdma_setup_kmode_qp. Signed-off-by: Youvaraj Sagar Signed-off-by: Sindhu Devale Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20230725155525.1081-2-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky Stable-dep-of: 926e8ea4b8da ("RDMA/irdma: Remove duplicate assignment") Signed-off-by: Sasha Levin

bpf: Derive source IP addr via bpf_*_fib_lookup()

2024-03-06T14:45:20Z

commit dab4e1f06cabb6834de14264394ccab197007302 upstream. Extend the bpf_fib_lookup() helper by making it to return the source IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set. For example, the following snippet can be used to derive the desired source IP address: struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr }; ret = bpf_skb_fib_lookup(skb, p, sizeof(p), BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH); if (ret != BPF_FIB_LKUP_RET_SUCCESS) return TC_ACT_SHOT; /* the p.ipv4_src now contains the source address */ The inability to derive the proper source address may cause malfunctions in BPF-based dataplanes for hosts containing netdevs with more than one routable IP address or for multi-homed hosts. For example, Cilium implements packet masquerading in BPF. If an egressing netdev to which the Cilium's BPF prog is attached has multiple IP addresses, then only one [hardcoded] IP address can be used for masquerading. This breaks connectivity if any other IP address should have been selected instead, for example, when a public and private addresses are attached to the same egress interface. The change was tested with Cilium [1]. Nikolay Aleksandrov helped to figure out the IPv6 addr selection. [1]: https://github.com/cilium/cilium/pull/28283 Signed-off-by: Martynas Pumputis Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt Signed-off-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman

bpf: Add table ID to bpf_fib_lookup BPF helper

2024-03-06T14:45:20Z

commit 8ad77e72caae22a1ddcfd0c03f2884929e93b7a4 upstream. Add ability to specify routing table ID to the `bpf_fib_lookup` BPF helper. A new field `tbid` is added to `struct bpf_fib_lookup` used as parameters to the `bpf_fib_lookup` BPF helper. When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and `BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup` will be used as the table ID for the fib lookup. If the `tbid` does not exist the fib lookup will fail with `BPF_FIB_LKUP_RET_NOT_FWDED`. The `tbid` field becomes a union over the vlan related output fields in `struct bpf_fib_lookup` and will be zeroed immediately after usage. This functionality is useful in containerized environments. For instance, if a CNI wants to dictate the next-hop for traffic leaving a container it can create a container-specific routing table and perform a fib lookup against this table in a "host-net-namespace-side" TC program. This functionality also allows `ip rule` like functionality at the TC layer, allowing an eBPF program to pick a routing table based on some aspect of the sk_buff. As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN datapath. When egress traffic leaves a Pod an eBPF program attached by Cilium will determine which VRF the egress traffic should target, and then perform a FIB lookup in a specific table representing this VRF's FIB. Signed-off-by: Louis DeLosSantos Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com Signed-off-by: Greg Kroah-Hartman

uapi: in6: replace temporary label with rfc9486

2024-03-06T14:45:07Z

[ Upstream commit 6a2008641920a9c6fe1abbeb9acbec463215d505 ] Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY IANA allocation for IOAM", while RFC 9486 is available for some time now. Just update the reference. Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Signed-off-by: Justin Iurman Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.be Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

netfilter: nft_compat: reject unused compat flag

2024-02-16T18:06:28Z

[ Upstream commit 292781c3c5485ce33bd22b2ef1b2bed709b4d672 ] Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL instead. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args

2024-02-01T00:17:07Z

commit 173431b274a9a54fc10b273b46e67f46bcf62d2e upstream. Add extra sanity check for btrfs_ioctl_defrag_range_args::flags. This is not really to enhance fuzzing tests, but as a preparation for future expansion on btrfs_ioctl_defrag_range_args. In the future we're going to add new members, allowing more fine tuning for btrfs defrag. Without the -ENONOTSUPP error, there would be no way to detect if the kernel supports those new defrag features. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

bpf: Add crosstask check to __bpf_get_stack

2024-01-25T23:27:24Z

[ Upstream commit b8e3a87a627b575896e448021e5c2f8a3bc19931 ] Currently get_perf_callchain only supports user stack walking for the current task. Passing the correct *crosstask* param will return 0 frames if the task passed to __bpf_get_stack isn't the current one instead of a single incorrect frame/address. This change passes the correct *crosstask* param but also does a preemptive check in __bpf_get_stack if the task is current and returns -EOPNOTSUPP if it is not. This issue was found using bpf_get_task_stack inside a BPF iterator ("iter/task"), which iterates over all tasks. bpf_get_task_stack works fine for fetching kernel stacks but because get_perf_callchain relies on the caller to know if the requested *task* is the current one (via *crosstask*) it was failing in a confusing way. It might be possible to get user stacks for all tasks utilizing something like access_process_vm but that requires the bpf program calling bpf_get_task_stack to be sleepable and would therefore be a breaking change. Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()") Signed-off-by: Jordan Rome Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com Signed-off-by: Sasha Levin

netfilter: nft_exthdr: add boolean DCCP option matching

2023-12-13T17:39:10Z

[ Upstream commit b9f9a485fb0eb80b0e2b90410b28cbb9b0e85687 ] The xt_dccp iptables module supports the matching of DCCP packets based on the presence or absence of DCCP options. Extend nft_exthdr to add this functionality to nftables. Link: https://bugzilla.netfilter.org/show_bug.cgi?id=930 Signed-off-by: Jeremy Sowden Signed-off-by: Florian Westphal Stable-dep-of: 63331e37fb22 ("netfilter: nf_tables: fix 'exist' matching on bigendian arches") Signed-off-by: Sasha Levin