user/sven/linux.git/include/xen/interface/io, branch v4.19.187

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2018-08-18T23:48:07Z

Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...

docs: Fix some broken references

2018-06-15T21:10:01Z

As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai Acked-by: Masami Hiramatsu Acked-by: Stephen Boyd Acked-by: Charles Keepax Acked-by: Mathieu Poirier Reviewed-by: Coly Li Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet

xen: Sync up with the canonical protocol definitions in Xen

2018-06-12T22:10:26Z

This is the sync up with the canonical definitions of the input, sound and display protocols in Xen. Changes to kbdif: 1. Add missing string constants for {feature|request}-raw-pointer to align with the rest of the interface file. 2. Add new XenStore feature fields, so it is possible to individually control set of exposed virtual devices for each guest OS: - set feature-disable-keyboard to 1 if no keyboard device needs to be created - set feature-disable-pointer to 1 if no pointer device needs to be created 3. Move multi-touch device parameters to backend nodes: these are described as a part of frontend's XenBus configuration nodes while they belong to backend's configuration. Fix this by moving the parameters to the proper section. Unique-id field: 1. Add unique-id XenBus entry for virtual input and display. 2. Change type of unique-id field to string for sndif to align with display and input protocols. Signed-off-by: Oleksandr Andrushchenko Reviewed-by: Juergen Gross Signed-off-by: Dmitry Torokhov

xen/sndif: Sync up with the canonical definition in Xen

2018-04-17T12:26:33Z

This is the sync up with the canonical definition of the sound protocol in Xen: 1. Protocol version was referenced in the protocol description, but missed its definition. Fixed by adding a constant for current protocol version. 2. Some of the request descriptions have "reserved" fields missed: fixed by adding corresponding entries. 3. Extend the size of the requests and responses to 64 octets. Bump protocol version to 2. 4. Add explicit back and front synchronization In order to provide explicit synchronization between backend and frontend the following changes are introduced in the protocol: - add new ring buffer for sending asynchronous events from backend to frontend to report number of bytes played by the frontend (XENSND_EVT_CUR_POS) - introduce trigger events for playback control: start/stop/pause/resume - add "req-" prefix to event-channel and ring-ref to unify naming of the Xen event channels for requests and events 5. Add explicit back and front parameter negotiation In order to provide explicit stream parameter negotiation between backend and frontend the following changes are introduced in the protocol: add XENSND_OP_HW_PARAM_QUERY request to read/update configuration space for the parameters given: request passes desired parameter's intervals/masks and the response to this request returns allowed min/max intervals/masks to be used. Signed-off-by: Oleksandr Andrushchenko Signed-off-by: Oleksandr Grytsov Reviewed-by: Konrad Rzeszutek Wilk Reviewed-by: Boris Ostrovsky Cc: Konrad Rzeszutek Wilk Cc: Takashi Iwai Signed-off-by: Boris Ostrovsky

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

xen: introduce the pvcalls interface header

2017-08-31T13:45:55Z

Introduce the C header file which defines the PV Calls interface. It is imported from xen/include/public/io/pvcalls.h. Signed-off-by: Stefano Stabellini Reviewed-by: Boris Ostrovsky Reviewed-by: Juergen Gross CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Boris Ostrovsky

xen/displif: add ABI for para-virtual display

2017-05-02T09:13:09Z

This is the ABI for the two halves of a para-virtualized display driver. This protocol aims to provide a unified protocol which fits more sophisticated use-cases than a framebuffer device can handle. At the moment basic functionality is supported with the intention to extend: o multiple dynamically allocated/destroyed framebuffers o buffers of arbitrary sizes o better configuration options including multiple display support Note: existing fbif can be used together with displif running at the same time, e.g. on Linux one provides framebuffer and another DRM/KMS Future extensions to the existing protocol may include: o allow display/connector cloning o allow allocating objects other than display buffers o add planes/overlays support o support scaling o support rotation Note, that this protocol doesn't use ring macros for bi-directional exchange (PV calls/9pfs) bacause: o it statically defines the use of a single page for the ring buffer o it uses direct memory access to ring's contents w/o memory copying o re-uses the same idea that kbdif/fbif use which for this use-case seems to be appropriate ================================================== Rationale for introducing this protocol instead of using the existing fbif: ================================================== 1. In/out event sizes o fbif - 40 octets o displif - 40 octets This is only the initial version of the displif protocol which means that there could be requests which will not fit (WRT introducing some GPU related functionality later on). In that case we cannot alter fbif sizes as we need to be backward compatible an will be forced to handle those apart of fbif. 2. Shared page Displif doesn't use anything like struct xenfb_page, but DEFINE_RING_TYPES(xen_displif, struct xendispl_req, struct xendispl_resp) which is a better and more common way. Output events use a shared page which only has in_cons and in_prod and all the rest is used for incoming events. Here struct xenfb_page could probably be used as is despite the fact that it only has a half of a page for incoming events which is only 50 events. (consider something like 60Hz display) 3. Amount of changes. fbif only provides XENFB_TYPE_UPDATE and XENFB_TYPE_RESIZE events, so it looks like it is easier to get fb support into displif than vice versa. displif at the moment has 6 requests and 1 event, multiple connector support, etc. Signed-off-by: Oleksandr Grytsov Signed-off-by: Oleksandr Andrushchenko Acked-by: Juergen Gross Signed-off-by: Juergen Gross

xen/sndif: add sound-device ABI

2017-05-02T09:13:03Z

Add ABI for the two halves of a para-virtualized sound driver to communicate with each other. The ABI allows implementing audio playback and capture as well as volume control and possibility to mute/unmute audio sources. Note: depending on the use-case backend can expose more sound cards and PCM devices/streams than the underlying HW physically has by employing SW mixers, configuring virtual sound streams, channels etc. Thus, allowing fine tunned configurations per frontend. Signed-off-by: Oleksandr Andrushchenko Signed-off-by: Oleksandr Grytsov Signed-off-by: Oleksandr Dmytryshyn Signed-off-by: Iurii Konovalenko Acked-by: Juergen Gross Signed-off-by: Juergen Gross

xen/kbdif: add multi-touch support

2017-05-02T09:12:56Z

Multi-touch fields re-use the page that is used by the other features which means that you can interleave multi-touch, motion, and key events. Signed-off-by: Oleksandr Andrushchenko Acked-by: Juergen Gross Signed-off-by: Juergen Gross

xen/kbdif: update protocol description

2017-05-02T09:12:50Z

The patch clarifies the protocol that is used by the PV keyboard drivers. Signed-off-by: Oleksandr Andrushchenko Acked-by: Juergen Gross Signed-off-by: Juergen Gross