user/sven/linux.git/include, branch v3.0.61

ahci: Add identifiers for ASM106x devices

2013-01-28T04:46:29Z

commit 7b4f6ecacb14f384adc1a5a67ad95eb082c02bd1 upstream. They don't always appear as AHCI class devices but instead as IDE class. Based on an initial patch by Hiroaki Nito Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804 Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik Signed-off-by: Abdallah Chatila Signed-off-by: Greg Kroah-Hartman

rtnetlink: Fix problem with buffer allocation

2013-01-17T16:43:58Z

commit 115c9b81928360d769a76c632bae62d15206a94a upstream. Implement a new netlink attribute type IFLA_EXT_MASK. The mask is a 32 bit value that can be used to indicate to the kernel that certain extended ifinfo values are requested by the user application. At this time the only mask value defined is RTEXT_FILTER_VF to indicate that the user wants the ifinfo dump to send information about the VFs belonging to the interface. This patch fixes a bug in which certain applications do not have large enough buffers to accommodate the extra information returned by the kernel with large numbers of SR-IOV virtual functions. Those applications will not send the new netlink attribute with the interface info dump request netlink messages so they will not get unexpectedly large request buffers returned by the kernel. Modifies the rtnl_calcit function to traverse the list of net devices and compute the minimum buffer size that can hold the info dumps of all matching devices based upon the filter passed in via the new netlink attribute filter mask. If no filter mask is sent then the buffer allocation defaults to NLMSG_GOODSIZE. With this change it is possible to add yet to be defined netlink attributes to the dump request which should make it fairly extensible in the future. Signed-off-by: Greg Rose Acked-by: Greg Rose Signed-off-by: David S. Miller [bwh: Backported to 3.0: - Adjust context - Drop the change in do_setlink() that reverts commit f18da1456581 ('net: RTNETLINK adjusting values of min_ifinfo_dump_size'), which was never applied here] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

rtnetlink: Compute and store minimum ifinfo dump size

2013-01-17T16:43:58Z

commit c7ac8679bec9397afe8918f788cbcef88c38da54 upstream. The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: Greg Rose Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT

2013-01-11T17:03:49Z

commit 53a59fc67f97374758e63a9c785891ec62324c81 upstream. Since commit e303297e6c3a ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by: Michal Hocko Cc: Mel Gorman Cc: Rik van Riel Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz

2013-01-11T17:03:49Z

commit 812089e01b9f65f90fc8fc670d8cce72a0e01fbb upstream. Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski Signed-off-by: Bjorn Helgaas Acked-by: Chris Ball CC: Manoj Iyer Signed-off-by: Greg Kroah-Hartman

tcp: implement RFC 5961 4.2

2013-01-11T17:03:48Z

[ Upstream commit 0c24604b68fc7810d429d6c3657b6f148270e528 ] Implement the RFC 5691 mitigation against Blind Reset attack using SYN bit. Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop incoming packet, instead of resetting the session. Add a new SNMP counter to count number of challenge acks sent in response to SYN packets. (netstat -s | grep TCPSYNChallenge) Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session because of a SYN flag. Signed-off-by: Eric Dumazet Cc: Kiran Kumar Kella Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: implement RFC 5961 3.2

2013-01-11T17:03:48Z

[ Upstream commit 282f23c6ee343126156dd41218b22ece96d747e3 ] Implement the RFC 5691 mitigation against Blind Reset attack using RST bit. Idea is to validate incoming RST sequence, to match RCV.NXT value, instead of previouly accepted window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND) If sequence is in window but not an exact match, send a "challenge ACK", so that the other part can resend an RST with the appropriate sequence. Add a new sysctl, tcp_challenge_ack_limit, to limit number of challenge ACK sent per second. Add a new SNMP counter to count number of challenge acks sent. (netstat -s | grep TCPChallengeACK) Signed-off-by: Eric Dumazet Cc: Kiran Kumar Kella Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ftrace: Do not function trace inlined functions

2013-01-11T17:03:47Z

commit 45959ee7aa645815a5ce303a0ea1e48a21e67c6a upstream. When gcc inlines a function, it does not mark it with the mcount prologue, which in turn means that inlined functions are not traced by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then gcc is allowed not to inline a function that is marked inline. Depending on the options and the compiler, a function may or may not be traced by the function tracer, depending on whether gcc decides to inline a function or not. This has caused several problems in the pass becaues gcc is not always consistent with what it decides to inline between different gcc versions. Some places should not be traced (like paravirt native_* functions) and these are mostly marked as inline. When gcc decides not to inline the function, and if that function should not be traced, then the ftrace function tracer will suddenly break when it use to work fine. This becomes even harder to debug when different versions of gcc will not inline that function, making the same kernel and config work for some gcc versions and not work for others. By making all functions marked inline to not be traced will remove the ambiguity that gcc adds when it comes to tracing functions marked inline. All gcc versions will be consistent with what functions are traced and having volatile working code will be removed. Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs to have notrace added, as the attribute __always_inline will force the function to be inlined and then not traced. Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED

2013-01-11T17:03:36Z

commit ad4b3fb7ff9940bcdb1e4cd62bd189d10fa636ba upstream. Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and (PageHead) is true, for tail pages. If this is indeed the intended behavior, which I doubt because it breaks cache cleaning on some ARM systems, then the nomenclature is highly problematic. This patch makes sure PageHead is only true for head pages and PageTail is only true for tail pages, and neither is true for non-compound pages. [ This buglet seems ancient - seems to have been introduced back in Apr 2008 in commit 6a1e7f777f61: "pageflags: convert to the use of new macros". And the reason nobody noticed is because the PageHead() tests are almost all about just sanity-checking, and only used on pages that are actual page heads. The fact that the old code returned true for tail pages too was thus not really noticeable. - Linus ] Signed-off-by: Christoffer Dall Acked-by: Andrea Arcangeli Cc: Andrew Morton Cc: Will Deacon Cc: Steve Capper Cc: Christoph Lameter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

exec: do not leave bprm->interp on stack

2013-01-11T17:03:36Z

commit b66c5984017533316fd1951770302649baf1aa33 upstream. If a series of scripts are executed, each triggering module loading via unprintable bytes in the script header, kernel stack contents can leak into the command line. Normally execution of binfmt_script and binfmt_misc happens recursively. However, when modules are enabled, and unprintable bytes exist in the bprm->buf, execution will restart after attempting to load matching binfmt modules. Unfortunately, the logic in binfmt_script and binfmt_misc does not expect to get restarted. They leave bprm->interp pointing to their local stack. This means on restart bprm->interp is left pointing into unused stack memory which can then be copied into the userspace argv areas. After additional study, it seems that both recursion and restart remains the desirable way to handle exec with scripts, misc, and modules. As such, we need to protect the changes to interp. This changes the logic to require allocation for any changes to the bprm->interp. To avoid adding a new kmalloc to every exec, the default value is left as-is. Only when passing through binfmt_script or binfmt_misc does an allocation take place. For a proof of concept, see DoTest.sh from: http://www.halfdog.net/Security/2012/LinuxKernelBinfmtScriptStackDataDisclosure/ Signed-off-by: Kees Cook Cc: halfdog Cc: P J P Cc: Alexander Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman