user/sven/linux.git/include, branch v3.10.30

ore: Fix wrong math in allocation of per device BIO

2014-02-13T21:48:00Z

commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream. At IO preparation we calculate the max pages at each device and allocate a BIO per device of that size. The calculation was wrong on some unaligned corner cases offset/length combination and would make prepare return with -ENOMEM. This would be bad for pnfs-objects that would in that case IO through MDS. And fatal for exofs were it would fail writes with EIO. Fix it by doing the proper math, that will work in all cases. (I ran a test with all possible offset/length combinations this time round). Also when reading we do not need to allocate for the parity units since we jump over them. Also lower the max_io_length to take into account the parity pages so not to allocate BIOs bigger than PAGE_SIZE Signed-off-by: Boaz Harrosh Signed-off-by: Greg Kroah-Hartman

fs/compat: fix lookup_dcookie() parameter handling

2014-02-13T21:48:00Z

commit d8d14bd09cddbaf0168d61af638455a26bd027ff upstream. Commit d5dc77bfeeab ("consolidate compat lookup_dcookie()") coverted all architectures to the new compat_sys_lookup_dcookie() syscall. The "len" paramater of the new compat syscall must have the type compat_size_t in order to enforce zero extension for architectures where the ABI requires that the caller of a function performed zero and/or sign extension to 64 bit of all parameters. Signed-off-by: Heiko Carstens Cc: Al Viro Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Hendrik Brueckner Cc: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

fs/compat: fix parameter handling for compat readv/writev syscalls

2014-02-13T21:48:00Z

commit dfd948e32af2e7b28bcd7a490c0a30d4b8df2a36 upstream. We got a report that the pwritev syscall does not work correctly in compat mode on s390. It turned out that with commit 72ec35163f9f ("switch compat readv/writev variants to COMPAT_SYSCALL_DEFINE") we lost the zero extension of a couple of syscall parameters because the some parameter types haven't been converted from unsigned long to compat_ulong_t. This is needed for architectures where the ABI requires that the caller of a function performed zero and/or sign extension to 64 bit of all parameters. Signed-off-by: Heiko Carstens Cc: Al Viro Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Hendrik Brueckner Cc: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/page-writeback.c: do not count anon pages as dirtyable memory

2014-02-13T21:48:00Z

commit a1c3bfb2f67ef766de03f1f56bdfff9c8595ab14 upstream. The VM is currently heavily tuned to avoid swapping. Whether that is good or bad is a separate discussion, but as long as the VM won't swap to make room for dirty cache, we can not consider anonymous pages when calculating the amount of dirtyable memory, the baseline to which dirty_background_ratio and dirty_ratio are applied. A simple workload that occupies a significant size (40+%, depending on memory layout, storage speeds etc.) of memory with anon/tmpfs pages and uses the remainder for a streaming writer demonstrates this problem. In that case, the actual cache pages are a small fraction of what is considered dirtyable overall, which results in an relatively large portion of the cache pages to be dirtied. As kswapd starts rotating these, random tasks enter direct reclaim and stall on IO. Only consider free pages and file pages dirtyable. Signed-off-by: Johannes Weiner Reported-by: Tejun Heo Tested-by: Tejun Heo Reviewed-by: Rik van Riel Cc: Mel Gorman Cc: Wu Fengguang Reviewed-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

audit: correct a type mismatch in audit_syscall_exit()

2014-02-13T21:48:00Z

commit 06bdadd7634551cfe8ce071fe44d0311b3033d9e upstream. audit_syscall_exit() saves a result of regs_return_value() in intermediate "int" variable and passes it to __audit_syscall_exit(), which expects its second argument as a "long" value. This will result in truncating the value returned by a system call and making a wrong audit record. I don't know why gcc compiler doesn't complain about this, but anyway it causes a problem at runtime on arm64 (and probably most 64-bit archs). Signed-off-by: AKASHI Takahiro Cc: Al Viro Cc: Eric Paris Signed-off-by: Andrew Morton Signed-off-by: Eric Paris Signed-off-by: Greg Kroah-Hartman

fuse: fix pipe_buf_operations

2014-02-13T21:47:59Z

commit 28a625cbc2a14f17b83e47ef907b2658576a32aa upstream. Having this struct in module memory could Oops when if the module is unloaded while the buffer still persists in a pipe. Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal merge them into nosteal_pipe_buf_ops (this is the same as default_pipe_buf_ops except stealing the page from the buffer is not allowed). Reported-by: Al Viro Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman

libata: disable LPM for some WD SATA-I devices

2014-02-06T19:08:16Z

commit ecd75ad514d73efc1bbcc5f10a13566c3ace5f53 upstream. For some reason, some early WD drives spin up and down drives erratically when the link is put into slumber mode which can reduce the life expectancy of the device significantly. Unfortunately, we don't have full list of devices and given the nature of the issue it'd be better to err on the side of false positives than the other way around. Let's disable LPM on all WD devices which match one of the known problematic model prefixes and are SATA-I. As horkage list doesn't support matching SATA capabilities, this is implemented as two horkages - WD_BROKEN_LPM and NOLPM. The former is set for the known prefixes and sets the latter if the matched device is SATA-I. Note that this isn't optimal as this disables all LPM operations and partial link power state reportedly works fine on these; however, the way LPM is implemented in libata makes it difficult to precisely map libata LPM setting to specific link power state. Well, these devices are already fairly outdated. Let's just disable whole LPM for now. Signed-off-by: Tejun Heo Reported-and-tested-by: Nikos Barkas Reported-and-tested-by: Ioannis Barkas References: https://bugzilla.kernel.org/show_bug.cgi?id=57211 Signed-off-by: Greg Kroah-Hartman

mm: hugetlbfs: fix hugetlbfs optimization

2014-02-06T19:08:12Z

commit 27c73ae759774e63313c1fbfeb17ba076cea64c5 upstream. Commit 7cb2ef56e6a8 ("mm: fix aio performance regression for database caused by THP") can cause dereference of a dangling pointer if split_huge_page runs during PageHuge() if there are updates to the tail_page->private field. Also it is repeating compound_head twice for hugetlbfs and it is running compound_head+compound_trans_head for THP when a single one is needed in both cases. The new code within the PageSlab() check doesn't need to verify that the THP page size is never bigger than the smallest hugetlbfs page size, to avoid memory corruption. A longstanding theoretical race condition was found while fixing the above (see the change right after the skip_unlock label, that is relevant for the compound_lock path too). By re-establishing the _mapcount tail refcounting for all compound pages, this also fixes the below problem: echo 0 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages BUG: Bad page state in process bash pfn:59a01 page:ffffea000139b038 count:0 mapcount:10 mapping: (null) index:0x0 page flags: 0x1c00000000008000(tail) Modules linked in: CPU: 6 PID: 2018 Comm: bash Not tainted 3.12.0+ #25 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x55/0x76 bad_page+0xd5/0x130 free_pages_prepare+0x213/0x280 __free_pages+0x36/0x80 update_and_free_page+0xc1/0xd0 free_pool_huge_page+0xc2/0xe0 set_max_huge_pages.part.58+0x14c/0x220 nr_hugepages_store_common.isra.60+0xd0/0xf0 nr_hugepages_store+0x13/0x20 kobj_attr_store+0xf/0x20 sysfs_write_file+0x189/0x1e0 vfs_write+0xc5/0x1f0 SyS_write+0x55/0xb0 system_call_fastpath+0x16/0x1b Signed-off-by: Khalid Aziz Signed-off-by: Andrea Arcangeli Tested-by: Khalid Aziz Cc: Pravin Shelar Cc: Greg Kroah-Hartman Cc: Ben Hutchings Cc: Christoph Lameter Cc: Johannes Weiner Cc: Mel Gorman Cc: Rik van Riel Cc: Andi Kleen Cc: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Guillaume Morin Signed-off-by: Greg Kroah-Hartman

mm: Make {,set}page_address() static inline if WANT_PAGE_VIRTUAL

2014-01-25T16:27:12Z

commit f92f455f67fef27929e6043499414605b0c94872 upstream. {,set}page_address() are macros if WANT_PAGE_VIRTUAL. If !WANT_PAGE_VIRTUAL, they're plain C functions. If someone calls them with a void *, this pointer is auto-converted to struct page * if !WANT_PAGE_VIRTUAL, but causes a build failure on architectures using WANT_PAGE_VIRTUAL (arc, m68k and sparc64): drivers/md/bcache/bset.c: In function `__btree_sort': drivers/md/bcache/bset.c:1190: warning: dereferencing `void *' pointer drivers/md/bcache/bset.c:1190: error: request for member `virtual' in something not a structure or union Convert them to static inline functions to fix this. There are already plenty of users of struct page members inside , so there's no reason to keep them as macros. Signed-off-by: Geert Uytterhoeven Acked-by: Michael S. Tsirkin Tested-by: Guenter Roeck Tested-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

vlan: Fix header ops passthru when doing TX VLAN offload.

2014-01-15T23:28:49Z

[ Upstream commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ] When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman