user/sven/linux.git/include, branch v3.10.49

ring-buffer: Check if buffer exists before polling

2014-07-17T22:58:03Z

commit 8b8b36834d0fff67fc8668093f4312dd04dcf21d upstream. The per_cpu buffers are created one per possible CPU. But these do not mean that those CPUs are online, nor do they even exist. With the addition of the ring buffer polling, it assumes that the caller polls on an existing buffer. But this is not the case if the user reads trace_pipe from a CPU that does not exist, and this causes the kernel to crash. Simple fix is to check the cpu against buffer bitmask against to see if the buffer was allocated or not and return -ENODEV if it is not. More updates were done to pass the -ENODEV back up to userspace. Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.com Reported-by: Sasha Levin Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

tracing: Fix syscall_*regfunc() vs copy_process() race

2014-07-07T01:54:16Z

commit 4af4206be2bd1933cae20c2b6fb2058dbc887f7c upstream. syscall_regfunc() and syscall_unregfunc() should set/clear TIF_SYSCALL_TRACEPOINT system-wide, but do_each_thread() can race with copy_process() and miss the new child which was not added to the process/thread lists yet. Change copy_process() to update the child's TIF_SYSCALL_TRACEPOINT under tasklist. Link: http://lkml.kernel.org/p/20140413185854.GB20668@redhat.com Fixes: a871bd33a6c0 "tracing: Add syscall tracepoints" Acked-by: Frederic Weisbecker Acked-by: Paul E. McKenney Signed-off-by: Oleg Nesterov Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman

ptrace,x86: force IRET path after a ptrace_stop()

2014-07-07T01:54:15Z

commit b9cd18de4db3c9ffa7e17b0dc0ca99ed5aa4d43a upstream. The 'sysret' fastpath does not correctly restore even all regular registers, much less any segment registers or reflags values. That is very much part of why it's faster than 'iret'. Normally that isn't a problem, because the normal ptrace() interface catches the process using the signal handler infrastructure, which always returns with an iret. However, some paths can get caught using ptrace_event() instead of the signal path, and for those we need to make sure that we aren't going to return to user space using 'sysret'. Otherwise the modifications that may have been done to the register set by the tracer wouldn't necessarily take effect. Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from arch_ptrace_stop_needed() which is invoked from ptrace_stop(). Signed-off-by: Tejun Heo Reported-by: Andy Lutomirski Acked-by: Oleg Nesterov Suggested-by: Linus Torvalds Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

genirq: Sanitize spurious interrupt detection of threaded irqs

2014-07-01T03:09:45Z

commit 1e77d0a1ed7417d2a5a52a7b8d32aea1833faa6c upstream. Till reported that the spurious interrupt detection of threaded interrupts is broken in two ways: - note_interrupt() is called for each action thread of a shared interrupt line. That's wrong as we are only interested whether none of the device drivers felt responsible for the interrupt, but by calling multiple times for a single interrupt line we account IRQ_NONE even if one of the drivers felt responsible. - note_interrupt() when called from the thread handler is not serialized. That leaves the members of irq_desc which are used for the spurious detection unprotected. To solve this we need to defer the spurious detection of a threaded interrupt to the next hardware interrupt context where we have implicit serialization. If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we check whether the previous interrupt requested a deferred check. If not, we request a deferred check for the next hardware interrupt and return. If set, we check whether one of the interrupt threads signaled success. Depending on this information we feed the result into the spurious detector. If one primary handler of a shared interrupt returns IRQ_HANDLED we disable the deferred check of irq threads on the same line, as we have found at least one device driver who cared. Reported-by: Till Straumann Signed-off-by: Thomas Gleixner Tested-by: Austin Schuh Cc: Oliver Hartkopp Cc: Wolfgang Grandegger Cc: Pavel Pisa Cc: Marc Kleine-Budde Cc: linux-can@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos Signed-off-by: Greg Kroah-Hartman

target: Report correct response length for some commands

2014-07-01T03:09:45Z

commit 2426bd456a61407388b6e61fc5f98dbcbebc50e2 upstream. When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier Tested-by: Christophe Vu-Brugier Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

ptrace: fix fork event messages across pid namespaces

2014-07-01T03:09:42Z

commit 4e52365f279564cef0ddd41db5237f0471381093 upstream. When tracing a process in another pid namespace, it's important for fork event messages to contain the child's pid as seen from the tracer's pid namespace, not the parent's. Otherwise, the tracer won't be able to correlate the fork event with later SIGTRAP signals it receives from the child. We still risk a race condition if a ptracer from a different pid namespace attaches after we compute the pid_t value. However, sending a bogus fork event message in this unlikely scenario is still a vast improvement over the status quo where we always send bogus fork event messages to debuggers in a different pid namespace than the forking process. Signed-off-by: Matthew Dempsky Acked-by: Oleg Nesterov Cc: Kees Cook Cc: Julien Tinnes Cc: Roland McGrath Cc: Jan Kratochvil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ALSA: control: Protect user controls against concurrent access

2014-06-26T19:12:43Z

commit 07f4d9d74a04aa7c72c5dae0ef97565f28f17b92 upstream. The user-control put and get handlers as well as the tlv do not protect against concurrent access from multiple threads. Since the state of the control is not updated atomically it is possible that either two write operations or a write and a read operation race against each other. Both can lead to arbitrary memory disclosure. This patch introduces a new lock that protects user-controls from concurrent access. Since applications typically access controls sequentially than in parallel a single lock per card should be fine. Signed-off-by: Lars-Peter Clausen Acked-by: Jaroslav Kysela Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: compress: Cancel the optimization of compiler and fix the size of struct for all platform.

2014-06-26T19:12:41Z

commit 2bd0ae464a6cf7363bbf72c8545e0aa43caa57f0 upstream. Cancel the optimization of compiler for struct snd_compr_avail which size will be 0x1c in 32bit kernel while 0x20 in 64bit kernel under the optimizer. That will make compaction between 32bit and 64bit. So add packed to fix the size of struct snd_compr_avail to 0x1c for all platform. Signed-off-by: Zhang Dongxing Signed-off-by: xiaoming wang Acked-by: Vinod Koul Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

team: fix mtu setting

2014-06-26T19:12:38Z

[ Upstream commit 9d0d68faea6962d62dd501cd6e71ce5cc8ed262b ] Now it is not possible to set mtu to team device which has a port enslaved to it. The reason is that when team_change_mtu() calls dev_set_mtu() for port device, notificator for NETDEV_PRECHANGEMTU event is called and team_device_event() returns NOTIFY_BAD forbidding the change. So fix this by returning NOTIFY_DONE here in case team is changing mtu in team_change_mtu(). Introduced-by: 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko Acked-by: Flavio Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fix inet_getid() and ipv6_select_ident() bugs

2014-06-26T19:12:38Z

[ Upstream commit 39c36094d78c39e038c1e499b2364e13bce36f54 ] I noticed we were sending wrong IPv4 ID in TCP flows when MTU discovery is disabled. Note how GSO/TSO packets do not have monotonically incrementing ID. 06:37:41.575531 IP (id 14227, proto: TCP (6), length: 4396) 06:37:41.575534 IP (id 14272, proto: TCP (6), length: 65212) 06:37:41.575544 IP (id 14312, proto: TCP (6), length: 57972) 06:37:41.575678 IP (id 14317, proto: TCP (6), length: 7292) 06:37:41.575683 IP (id 14361, proto: TCP (6), length: 63764) It appears I introduced this bug in linux-3.1. inet_getid() must return the old value of peer->ip_id_count, not the new one. Lets revert this part, and remove the prevention of a null identification field in IPv6 Fragment Extension Header, which is dubious and not even done properly. Fixes: 87c48fa3b463 ("ipv6: make fragment identifications less predictable") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman