user/sven/linux.git/include, branch v3.18.15

xfrm: release dst_orig in case of error in xfrm_lookup()

2015-06-10T17:42:46Z

[ Upstream commit ac37e2515c1a89c477459a2020b6bfdedabdb91b ] dst_orig should be released on error. Function like __xfrm_route_forward() expects that behavior. Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(), which expects the opposite. Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be done in case of error. Fixes: f92ee61982d("xfrm: Generate blackhole routes only from route lookup functions") Signed-off-by: huaibin Wang Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

drm/radeon: add new bonaire pci id

2015-06-10T17:42:41Z

[ Upstream commit fcf3b54282e4c5a95a1f45f67558bc105acdbc6a ] Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

sched: Handle priority boosted tasks proper in setscheduler()

2015-06-10T17:42:31Z

[ Upstream commit 0782e63bc6fe7e2d3408d250df11d388b7799c6b ] Ronny reported that the following scenario is not handled correctly: T1 (prio = 10) lock(rtmutex); T2 (prio = 20) lock(rtmutex) boost T1 T1 (prio = 20) sys_set_scheduler(prio = 30) T1 prio = 30 .... sys_set_scheduler(prio = 10) T1 prio = 30 The last step is wrong as T1 should now be back at prio 20. Commit c365c292d059 ("sched: Consider pi boosting in setscheduler()") only handles the case where a boosted tasks tries to lower its priority. Fix it by taking the new effective priority into account for the decision whether a change of the priority is required. Reported-by: Ronny Meeus Tested-by: Steven Rostedt Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Steven Rostedt Cc: Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Mike Galbraith Fixes: c365c292d059 ("sched: Consider pi boosting in setscheduler()") Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505051806060.4225@nanos Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

libata: Ignore spurious PHY event on LPM policy change

2015-06-10T17:42:26Z

[ Upstream commit 09c5b4803a80a5451d950d6a539d2eb311dc0fb1 ] When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13 Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

libata: Add helper to determine when PHY events should be ignored

2015-06-10T17:42:26Z

[ Upstream commit 8393b811f38acdf7fd8da2028708edad3e68ce1f ] This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by: Gabriele Mazzotta Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

xen/events: don't bind non-percpu VIRQs with percpu chip

2015-06-09T17:43:54Z

[ Upstream commit 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a ] A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel Cc: Signed-off-by: Sasha Levin

ktime: Fix ktime_divns to do signed division

2015-06-09T17:43:50Z

[ Upstream commit f7bcb70ebae0dcdb5a2d859b09e4465784d99029 ] It was noted that the 32bit implementation of ktime_divns() was doing unsigned division and didn't properly handle negative values. And when a ktime helper was changed to utilize ktime_divns, it caused a regression on some IR blasters. See the following bugzilla for details: https://bugzilla.redhat.com/show_bug.cgi?id=1200353 This patch fixes the problem in ktime_divns by checking and preserving the sign bit, and then reapplying it if appropriate after the division, it also changes the return type to a s64 to make it more obvious this is expected. Nicolas also pointed out that negative dividers would cause infinite loops on 32bit systems, negative dividers is unlikely for users of this function, but out of caution this patch adds checks for negative dividers for both 32-bit (BUG_ON) and 64-bit(WARN_ON) versions to make sure no such use cases creep in. [ tglx: Hand an u64 to do_div() to avoid the compiler warning ] Fixes: 166afb64511e 'ktime: Sanitize ktime_to_us/ms conversion' Reported-and-tested-by: Trevor Cordes Signed-off-by: John Stultz Acked-by: Nicolas Pitre Cc: Ingo Molnar Cc: Josh Boyer Cc: One Thousand Gnomes Cc: Link: http://lkml.kernel.org/r/1431118043-23452-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner Signed-off-by: Sasha Levin

ktime: Optimize ktime_divns for constant divisors

2015-06-09T17:43:49Z

[ Upstream commit 8b618628b2bf83512fc8df5e8672619d65adfdfb ] At least on ARM, do_div() is optimized to turn constant divisors into an inline multiplication by the reciprocal value at compile time. However this optimization is missed entirely whenever ktime_divns() is used and the slow out-of-line division code is used all the time. Let ktime_divns() use do_div() inline whenever the divisor is constant and small enough. This will make things like ktime_to_us() and ktime_to_ms() much faster. Cc: Arnd Bergmann Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Nicolas Pitre Acked-by: Arnd Bergmann Signed-off-by: Nicolas Pitre Signed-off-by: John Stultz Signed-off-by: Sasha Levin

ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.

2015-06-09T17:43:41Z

[ Upstream commit f254e3c57b9d952e987502aefa0804c177dd2503 ] ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3 OSPMs like Linux expect an acpi_physical_address returning value from acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't equal to sizeof (acpi_physical_address): drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default] In file included from include/acpi/acpi.h:64:0, from include/linux/acpi.h:36, from drivers/acpi/osl.c:41: include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *' This patch corrects acpi_find_root_pointer(). Link: https://github.com/acpica/acpica/commit/7d9fd643 Signed-off-by: Lv Zheng Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()

2015-05-23T19:43:03Z

[ Upstream commit d8fd150fe3935e1692bf57c66691e17409ebb9c1 ] The range check for b-tree level parameter in nilfs_btree_root_broken() is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even though the level is limited to values in the range of 0 to (NILFS_BTREE_LEVEL_MAX - 1). Since the level parameter is read from storage device and used to index nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it can cause memory overrun during btree operations if the boundary value is set to the level parameter on device. This fixes the broken sanity check and adds a comment to clarify that the upper bound NILFS_BTREE_LEVEL_MAX is exclusive. Signed-off-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin