user/sven/linux.git/include, branch v4.13.7

udp: perform source validation for mcast early demux

2017-10-12T09:56:19Z

[ Upstream commit bc044e8db7962e727a75b591b9851ff2ac5cf846 ] The UDP early demux can leverate the rx dst cache even for multicast unconnected sockets. In such scenario the ipv4 source address is validated only on the first packet in the given flow. After that, when we fetch the dst entry from the socket rx cache, we stop enforcing the rp_filter and we even start accepting any kind of martian addresses. Disabling the dst cache for unconnected multicast socket will cause large performace regression, nearly reducing by half the max ingress tput. Instead we factor out a route helper to completely validate an skb source address for multicast packets and we call it from the UDP early demux for mcast packets landing on unconnected sockets, after successful fetching the related cached dst entry. This still gives a measurable, but limited performance regression: rp_filter = 0 rp_filter = 1 edmux disabled: 1182 Kpps 1127 Kpps edmux before: 2238 Kpps 2238 Kpps edmux after: 2037 Kpps 2019 Kpps The above figures are on top of current net tree. Applying the net-next commit 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled.") the delta with rp_filter == 0 will decrease even more. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP

2017-10-12T09:56:18Z

commit 28a0bc4120d38a394499382ba21d6965a67a3703 upstream. SBC-4 states: "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the maximum number of LBAs that may be unmapped by an UNMAP command" "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates the maximum number of contiguous logical blocks that the device server allows to be unmapped or written in a single WRITE SAME command." Despite the spec being clear on the topic, some devices incorrectly expect WRITE SAME commands with the UNMAP bit set to be limited to the value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD. Implement a blacklist option that can be used to accommodate devices with this behavior. Reported-by: Bill Kuzeja Reported-by: Ewan D. Milne Reviewed-by: Ewan D. Milne Tested-by: Laurence Oberman Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

dm ioctl: fix alignment of event number in the device list

2017-10-12T09:56:17Z

commit 62e082430ea4bb5b28909ca4375bb683931e22aa upstream. The size of struct dm_name_list is different on 32-bit and 64-bit kernels (so "(nl + 1)" differs between 32-bit and 64-bit kernels). This mismatch caused some harmless difference in padding when using 32-bit or 64-bit kernel. Commit 23d70c5e52dd ("dm ioctl: report event number in DM_LIST_DEVICES") added reporting event number in the output of DM_LIST_DEVICES_CMD. This difference in padding makes it impossible for userspace to determine the location of the event number (the location would be different when running on 32-bit and 64-bit kernels). Fix the padding by using offsetof(struct dm_name_list, name) instead of sizeof(struct dm_name_list) to determine the location of entries. Also, the ioctl version number is incremented to 37 so that userspace can use the version number to determine that the event number is present and correctly located. In addition, a global event is now raised when a DM device is created, removed, renamed or when table is swapped, so that the user can monitor for device changes. Reported-by: Eugene Syromiatnikov Fixes: 23d70c5e52dd ("dm ioctl: report event number in DM_LIST_DEVICES") Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

netlink: fix nla_put_{u8,u16,u32} for KASAN

2017-10-12T09:56:17Z

commit b4391db42308c9940944b5d7be5ca4b78fb88dd0 upstream. When CONFIG_KASAN is enabled, the "--param asan-stack=1" causes rather large stack frames in some functions. This goes unnoticed normally because CONFIG_FRAME_WARN is disabled with CONFIG_KASAN by default as of commit 3f181b4d8652 ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y"). The kernelci.org build bot however has the warning enabled and that led me to investigate it a little further, as every build produces these warnings: net/wireless/nl80211.c:4389:1: warning: the frame size of 2240 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1895:1: warning: the frame size of 3776 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1410:1: warning: the frame size of 2208 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/bridge/br_netlink.c:1282:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] Most of this problem is now solved in gcc-8, which can consolidate the stack slots for the inline function arguments. On older compilers we can add a workaround by declaring a local variable in each function to pass the inline function argument. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

percpu: make this_cpu_generic_read() atomic w.r.t. interrupts

2017-10-12T09:56:14Z

commit e88d62cd4b2f0b1ae55e9008e79c2794b1fc914d upstream. As raw_cpu_generic_read() is a plain read from a raw_cpu_ptr() address, it's possible (albeit unlikely) that the compiler will split the access across multiple instructions. In this_cpu_generic_read() we disable preemption but not interrupts before calling raw_cpu_generic_read(). Thus, an interrupt could be taken in the middle of the split load instructions. If a this_cpu_write() or RMW this_cpu_*() op is made to the same variable in the interrupt handling path, this_cpu_read() will return a torn value. For native word types, we can avoid tearing using READ_ONCE(), but this won't work in all cases (e.g. 64-bit types on most 32-bit platforms). This patch reworks this_cpu_generic_read() to use READ_ONCE() where possible, otherwise falling back to disabling interrupts. Signed-off-by: Mark Rutland Cc: Arnd Bergmann Cc: Christoph Lameter Cc: Peter Zijlstra Cc: Pranith Kumar Cc: Tejun Heo Cc: Thomas Gleixner Cc: linux-arch@vger.kernel.org Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

mm, oom_reaper: skip mm structs with mmu notifiers

2017-10-12T09:56:13Z

commit 4d4bbd8526a8fbeb2c090ea360211fceff952383 upstream. Andrea has noticed that the oom_reaper doesn't invalidate the range via mmu notifiers (mmu_notifier_invalidate_range_start/end) and that can corrupt the memory of the kvm guest for example. tlb_flush_mmu_tlbonly already invokes mmu notifiers but that is not sufficient as per Andrea: "mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range" As the callback is allowed to sleep and the implementation is out of hand of the MM it is safer to simply bail out if there is an mmu notifier registered. In order to not fail too early make the mm_has_notifiers check under the oom_lock and have a little nap before failing to give the current oom victim some more time to exit. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170913113427.2291-1-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko Reported-by: Andrea Arcangeli Reviewed-by: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: Implement a dedicated reset function

2017-10-12T09:56:11Z

commit 7fc10de8d49a748c476532c9d8e8fe19e548dd67 upstream. Since most of the SD ADCs have the option of reseting the serial interface by sending a number of SCLKs with CS = 0 and DIN = 1, a dedicated function that can do this is usefull. Needed for the patch: iio: ad7793: Fix the serial interface reset Signed-off-by: Dragos Bogdan Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

USB: fix out-of-bounds in usb_set_configuration

2017-10-12T09:56:10Z

commit bd7a3fe770ebd8391d1c7d072ff88e9e76d063eb upstream. Andrey Konovalov reported a possible out-of-bounds problem for a USB interface association descriptor. He writes: It seems there's no proper size check of a USB_DT_INTERFACE_ASSOCIATION descriptor. It's only checked that the size is >= 2 in usb_parse_configuration(), so find_iad() might do out-of-bounds access to intf_assoc->bInterfaceCount. And he's right, we don't check for crazy descriptors of this type very well, so resolve this problem. Yet another issue found by syzkaller... Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Greg Kroah-Hartman

bpf: fix bpf_tail_call() x64 JIT

2017-10-12T09:56:07Z

[ Upstream commit 90caccdd8cc0215705f18b92771b449b01e2474a ] - bpf prog_array just like all other types of bpf array accepts 32-bit index. Clarify that in the comment. - fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes - tighten corresponding check in the interpreter to stay consistent The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag in commit 96eabe7a40aa in 4.14. Before that the map_flags would stay zero and though JIT code is wrong it will check bounds correctly. Hence two fixes tags. All other JITs don't have this problem. Signed-off-by: Alexei Starovoitov Fixes: 96eabe7a40aa ("bpf: Allow selecting numa node during map creation") Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper") Acked-by: Daniel Borkmann Acked-by: Martin KaFai Lau Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

IPv4: early demux can return an error code

2017-10-12T09:56:06Z

[ Upstream commit 7487449c86c65202b3b725c4524cb48dd65e4e6f ] Currently no error is emitted, but this infrastructure will used by the next patch to allow source address validation for mcast sockets. Since early demux can do a route lookup and an ipv4 route lookup can return an error code this is consistent with the current ipv4 route infrastructure. Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman