user/sven/linux.git/include, branch v4.14.157

KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved

2019-12-01T08:14:15Z

commit a78986aae9b2988f8493f9f65a587ee433e83bc3 upstream. Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and instead manually handle ZONE_DEVICE on a case-by-case basis. For things like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal pages, e.g. put pages grabbed via gup(). But for flows such as setting A/D bits or shifting refcounts for transparent huge pages, KVM needs to to avoid processing ZONE_DEVICE pages as the flows in question lack the underlying machinery for proper handling of ZONE_DEVICE pages. This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup() when running a KVM guest backed with /dev/dax memory, as KVM straight up doesn't put any references to ZONE_DEVICE pages acquired by gup(). Note, Dan Williams proposed an alternative solution of doing put_page() on ZONE_DEVICE pages immediately after gup() in order to simplify the auditing needed to ensure is_zone_device_page() is called if and only if the backing device is pinned (via gup()). But that approach would break kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til unmap() when accessing guest memory, unlike KVM's secondary MMU, which coordinates with mmu_notifier invalidations to avoid creating stale page references, i.e. doesn't rely on pages being pinned. [*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl Reported-by: Adam Borowski Analyzed-by: David Hildenbrand Acked-by: Dan Williams Cc: stable@vger.kernel.org Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini [sean: backport to 4.x; resolve conflict in mmu.c] Signed-off-by: Sean Christopherson Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: make add_memory() take the device_hotplug_lock

2019-12-01T08:13:57Z

[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ] add_memory() currently does not take the device_hotplug_lock, however is aleady called under the lock from arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c to synchronize against CPU hot-remove and similar. In general, we should hold the device_hotplug_lock when adding memory to synchronize against online/offline request (e.g. from user space) - which already resulted in lock inversions due to device_lock() and mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory hot-add deadlock"). add_memory()/add_memory_resource() will create memory block devices, so this really feels like the right thing to do. Holding the device_hotplug_lock makes sure that a memory block device can really only be accessed (e.g. via .online/.state) from user space, once the memory has been fully added to the system. The lock is not held yet in drivers/xen/balloon.c arch/powerpc/platforms/powernv/memtrace.c drivers/s390/char/sclp_cmd.c drivers/hv/hv_balloon.c So, let's either use the locked variants or take the lock. Don't export add_memory_resource(), as it once was exported to be used by XEN, which is never built as a module. If somebody requires it, we also have to export a locked variant (as device_hotplug_lock is never exported). Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com Signed-off-by: David Hildenbrand Reviewed-by: Pavel Tatashin Reviewed-by: Rafael J. Wysocki Reviewed-by: Rashmica Gupta Reviewed-by: Oscar Salvador Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: "Rafael J. Wysocki" Cc: Len Brown Cc: Greg Kroah-Hartman Cc: Boris Ostrovsky Cc: Juergen Gross Cc: Nathan Fontenot Cc: John Allen Cc: Michal Hocko Cc: Dan Williams Cc: Joonsoo Kim Cc: Vlastimil Babka Cc: Mathieu Malaterre Cc: Pavel Tatashin Cc: YASUAKI ISHIMATSU Cc: Balbir Singh Cc: Haiyang Zhang Cc: Heiko Carstens Cc: Jonathan Corbet Cc: Kate Stewart Cc: "K. Y. Srinivasan" Cc: Martin Schwidefsky Cc: Michael Neuling Cc: Philippe Ombredanne Cc: Stephen Hemminger Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

linux/bitmap.h: fix type of nbits in bitmap_shift_right()

2019-12-01T08:13:53Z

[ Upstream commit d9873969fa8725dc6a5a21ab788c057fd8719751 ] Most other bitmap API, including the OOL version __bitmap_shift_right, take unsigned nbits. This was accidentally left out from 2fbad29917c98. Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk Fixes: 2fbad29917c98 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters") Signed-off-by: Rasmus Villemoes Reported-by: Yury Norov Reviewed-by: Andy Shevchenko Cc: Rasmus Villemoes Cc: Sudeep Holla Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

linux/bitmap.h: handle constant zero-size bitmaps correctly

2019-12-01T08:13:53Z

[ Upstream commit 7275b097851a5e2e0dd4da039c7e96b59ac5314e ] The static inlines in bitmap.h do not handle a compile-time constant nbits==0 correctly (they dereference the passed src or dst pointers, despite only 0 words being valid to access). I had the 0-day buildbot chew on a patch [1] that would cause build failures for such cases without complaining, suggesting that we don't have any such users currently, at least for the 70 .config/arch combinations that was built. Should any turn up, make sure they use the out-of-line versions, which do handle nbits==0 correctly. This is of course not the most efficient, but it's much less churn than teaching all the static inlines an "if (zero_const_nbits())", and since we don't have any current instances, this doesn't affect existing code at all. [1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes Reviewed-by: Andy Shevchenko Cc: Yury Norov Cc: Rasmus Villemoes Cc: Sudeep Holla Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

mfd: max8997: Enale irq-wakeup unconditionally

2019-12-01T08:13:46Z

[ Upstream commit efddff27c886e729a7f84a7205bd84d7d4af7336 ] IRQ wake up support for MAX8997 driver was initially configured by respective property in pdata. However, after the driver conversion to device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD drivers initialized from device-tree assume that they can be an irq wakeup source, so enable it also for MAX8997. This fixes support for wakeup from MAX8997 RTC alarm. Signed-off-by: Marek Szyprowski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well

2019-12-01T08:13:45Z

[ Upstream commit 9f8ddee1dab836ca758ca8fc555ab5a3aaa5d3fd ] Power button IRQ actually has a second level of interrupts to distinguish between UI and POWER buttons. Moreover, current implementation looks awkward in approach to handle second level IRQs by first level related IRQ chip. To address above issues, split power button IRQ to be chained as well. Signed-off-by: Andy Shevchenko Reviewed-by: Mika Westerberg Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values

2019-12-01T08:13:45Z

[ Upstream commit 55143439b7b501882bea9d95a54adfe00ffc79a3 ] When trying to read any MC13892 ADC channel on a imx51-babbage board: The MC13892 PMIC shutdowns completely. After debugging this issue and comparing the MC13892 and MC13783 initializations done in the vendor kernel, it was noticed that the CHRGRAWDIV bit of the ADC0 register was not being set. This bit is set by default after power on, but the driver was clearing it. After setting this bit it is possible to read the ADC values correctly. Signed-off-by: Fabio Estevam Tested-by: Chris Healy Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

IB/mlx4: Avoid implicit enumerated type conversion

2019-11-24T07:23:05Z

[ Upstream commit b56511c15713ba6c7572e77a41f7ddba9c1053ec ] Clang warns when one enumerated type is implicitly converted to another. drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP; ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP; ~ ^~~~~~~~~~~~~~~~~ The type mlx4_ib_qp_flags explicitly provides supplemental values to the type ib_qp_create_flags. Make that clear to Clang by changing the create_flags type to u32. Reported-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction

2019-11-24T07:22:57Z

[ Upstream commit 9524d6b265f9b2b9a61fceb2ee2ce1c2a83e39ca ] Clang warns when implicitly converting from one enumerated type to another. Avoid this by using the equivalent value from the expected type. In file included from drivers/dma/ep93xx_dma.c:30: ./include/linux/platform_data/dma-ep93xx.h:88:10: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] return DMA_NONE; ~~~~~~ ^~~~~~~~ 1 warning generated. Reported-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

SUNRPC: Fix priority queue fairness

2019-11-24T07:22:52Z

[ Upstream commit f42f7c283078ce3c1e8368b140e270755b1ae313 ] Fix up the priority queue to not batch by owner, but by queue, so that we allow '1 << priority' elements to be dequeued before switching to the next priority queue. The owner field is still used to wake up requests in round robin order by owner to avoid single processes hogging the RPC layer by loading the queues. Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin