user/sven/linux.git/include, branch v4.19.112

driver core: Remove device link creation limitation

2020-03-20T10:55:58Z

commit 515db266a9dace92b0cbaed9a6044dd5304b8ca9 upstream. If device_link_add() is called for a consumer/supplier pair with an existing device link between them and the existing link's type is not in agreement with the flags passed to that function by its caller, NULL will be returned. That is seriously inconvenient, because it forces the callers of device_link_add() to worry about what others may or may not do even if that is not relevant to them for any other reasons. It turns out, however, that this limitation can be made go away relatively easily. The underlying observation is that if DL_FLAG_STATELESS has been passed to device_link_add() in flags for the given consumer/supplier pair at least once, calling either device_link_del() or device_link_remove() to release the link returned by it should work, but there are no other requirements associated with that flag. In turn, if at least one of the callers of device_link_add() for the given consumer/supplier pair has not passed DL_FLAG_STATELESS to it in flags, the driver core should track the status of the link and act on it as appropriate (ie. the link should be treated as "managed"). This means that DL_FLAG_STATELESS needs to be set for managed device links and it should be valid to call device_link_del() or device_link_remove() to drop references to them in certain sutiations. To allow that to happen, introduce a new (internal) device link flag called DL_FLAG_MANAGED and make device_link_add() set it automatically whenever DL_FLAG_STATELESS is not passed to it. Also make it take additional references to existing device links that were previously stateless (that is, with DL_FLAG_STATELESS set and DL_FLAG_MANAGED unset) and will need to be managed going forward and initialize their status (which has been DL_STATE_NONE so far). Accordingly, when a managed device link is dropped automatically by the driver core, make it clear DL_FLAG_MANAGED, reset the link's status back to DL_STATE_NONE and drop the reference to it associated with DL_FLAG_MANAGED instead of just deleting it right away (to allow it to stay around in case it still needs to be released explicitly by someone). With that, since setting DL_FLAG_STATELESS doesn't mean that the device link in question is not managed any more, replace all of the status-tracking checks against DL_FLAG_STATELESS with analogous checks against DL_FLAG_MANAGED and update the documentation to reflect these changes. While at it, make device_link_add() reject flags that it does not recognize, including DL_FLAG_MANAGED. Signed-off-by: Rafael J. Wysocki Reviewed-by: Saravana Kannan Tested-by: Marek Szyprowski Review-by: Saravana Kannan Link: https://lore.kernel.org/r/2305283.AStDPdUUnE@kreacher Signed-off-by: Saravana Kannan Signed-off-by: Greg Kroah-Hartman

driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER

2020-03-20T10:55:58Z

commit e7dd40105aac9ba051e44ad711123bc53a5e4c71 upstream. Add a new device link flag, DL_FLAG_AUTOPROBE_CONSUMER, to request the driver core to probe for a consumer driver automatically after binding a driver to the supplier device on a persistent managed device link. As unbinding the supplier driver on a managed device link causes the consumer driver to be detached from its device automatically, this flag provides a complementary mechanism which is needed to address some "composite device" use cases. Signed-off-by: Rafael J. Wysocki Signed-off-by: Saravana Kannan Signed-off-by: Greg Kroah-Hartman

efi: Make efi_rts_work accessible to efi page fault handler

2020-03-18T06:14:21Z

commit 9dbbedaa6171247c4c7c40b83f05b200a117c2e0 upstream. After the kernel has booted, if any accesses by firmware causes a page fault, the efi page fault handler would freeze efi_rts_wq and schedules a new process. To do this, the efi page fault handler needs efi_rts_work. Hence, make it accessible. There will be no race conditions in accessing this structure, because all the calls to efi runtime services are already serialized. Tested-by: Bhupesh Sharma Suggested-by: Matt Fleming Based-on-code-from: Ricardo Neri Signed-off-by: Sai Praneeth Prakhya Signed-off-by: Ard Biesheuvel Fixes: 3eb420e70d87 (“efi: Use a work queue to invoke EFI Runtime Services”) Signed-off-by: Wen Yang Cc: Caspar Zhang Signed-off-by: Greg Kroah-Hartman

cgroup: Iterate tasks that did not finish do_exit()

2020-03-18T06:14:19Z

commit 9c974c77246460fa6a92c18554c3311c8c83c160 upstream. PF_EXITING is set earlier than actual removal from css_set when a task is exitting. This can confuse cgroup.procs readers who see no PF_EXITING tasks, however, rmdir is checking against css_set membership so it can transitionally fail with EBUSY. Fix this by listing tasks that weren't unlinked from css_set active lists. It may happen that other users of the task iterator (without CSS_TASK_ITER_PROCS) spot a PF_EXITING task before cgroup_exit(). This is equal to the state before commit c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") but it may be reviewed later. Reported-by: Suren Baghdasaryan Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") Signed-off-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

net: phy: fix MDIO bus PM PHY resuming

2020-03-18T06:14:17Z

[ Upstream commit 611d779af7cad2b87487ff58e4931a90c20b113c ] So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

fib: add missing attribute validation for tun_id

2020-03-18T06:14:14Z

[ Upstream commit 4c16d64ea04056f1b1b324ab6916019f6a064114 ] Add missing netlink policy entry for FRA_TUN_ID. Fixes: e7030878fc84 ("fib: Add fib rule match on tunnel id") Signed-off-by: Jakub Kicinski Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

inet_diag: return classid for all socket types

2020-03-18T06:14:11Z

[ Upstream commit 83f73c5bb7b9a9135173f0ba2b1aa00c06664ff9 ] In commit 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") croup classid reporting was fixed. But this works only for TCP sockets because for other socket types icsk parameter can be NULL and classid code path is skipped. This change moves classid handling to inet_diag_msg_attrs_fill() function. Also inet_diag_msg_attrs_size() helper was added and addends in nlmsg_new() were reordered to save order from inet_sk_diag_fill(). Fixes: 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") Signed-off-by: Dmitry Yakunin Reviewed-by: Konstantin Khlebnikov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

usb: charger: assign specific number for enum value

2020-03-05T15:42:20Z

commit ca4b43c14cd88d28cfc6467d2fa075aad6818f1d upstream. To work properly on every architectures and compilers, the enum value needs to be specific numbers. Suggested-by: Greg KH Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

HID: core: increase HID report buffer size to 8KiB

2020-03-05T15:42:18Z

commit 84a4062632462c4320704fcdf8e99e89e94c0aba upstream. We have a HID touch device that reports its opens and shorts test results in HID buffers of size 8184 bytes. The maximum size of the HID buffer is currently set to 4096 bytes, causing probe of this device to fail. With this patch we increase the maximum size of the HID buffer to 8192 bytes, making device probe and acquisition of said buffers succeed. Signed-off-by: Johan Korsnes Cc: Alan Stern Cc: Armando Visconti Cc: Jiri Kosina Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro

2020-03-05T15:42:17Z

commit 1dade3a7048ccfc675650cd2cf13d578b095e5fb upstream. Sometimes it is useful to find the access_width field value in bytes and not in bits so add a helper that can be used for this purpose. Suggested-by: Jean Delvare Signed-off-by: Mika Westerberg Reviewed-by: Jean Delvare Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman