user/sven/linux.git/include, branch v4.19.153

mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary

2020-10-29T08:55:15Z

[ Upstream commit 67197a4f28d28d0b073ab0427b03cb2ee5382578 ] Currently __set_oom_adj loops through all processes in the system to keep oom_score_adj and oom_score_adj_min in sync between processes sharing their mm. This is done for any task with more that one mm_users, which includes processes with multiple threads (sharing mm and signals). However for such processes the loop is unnecessary because their signal structure is shared as well. Android updates oom_score_adj whenever a tasks changes its role (background/foreground/...) or binds to/unbinds from a service, making it more/less important. Such operation can happen frequently. We noticed that updates to oom_score_adj became more expensive and after further investigation found out that the patch mentioned in "Fixes" introduced a regression. Using Pixel 4 with a typical Android workload, write time to oom_score_adj increased from ~3.57us to ~362us. Moreover this regression linearly depends on the number of multi-threaded processes running on the system. Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj update should be synchronized between multiple processes. To prevent races between clone() and __set_oom_adj(), when oom_score_adj of the process being cloned might be modified from userspace, we use oom_adj_mutex. Its scope is changed to global. The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for the case of vfork(). To prevent performance regressions of vfork(), we skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is specified. Clearing the MMF_MULTIPROCESS flag (when the last process sharing the mm exits) is left out of this patch to keep it simple and because it is believed that this threading model is rare. Should there ever be a need for optimizing that case as well, it can be done by hooking into the exit path, likely following the mm_update_next_owner pattern. With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being quite rare, the regression is gone after the change is applied. [surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by: Tim Murray Suggested-by: Michal Hocko Signed-off-by: Suren Baghdasaryan Signed-off-by: Andrew Morton Acked-by: Christian Brauner Acked-by: Michal Hocko Acked-by: Oleg Nesterov Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Eugene Syromiatnikov Cc: Christian Kellner Cc: Adrian Reber Cc: Shakeel Butt Cc: Aleksa Sarai Cc: Alexey Dobriyan Cc: "Eric W. Biederman" Cc: Alexey Gladkov Cc: Michel Lespinasse Cc: Daniel Jordan Cc: Andrei Vagin Cc: Bernd Edlinger Cc: John Johansen Cc: Yafang Shao Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com Debugged-by: Minchan Kim Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

netfilter: nf_log: missing vlan offload tag and proto

2020-10-29T08:55:15Z

[ Upstream commit 0d9826bc18ce356e8909919ad681ad65d0a6061e ] Dump vlan tag and proto for the usual vlan offload case if the NF_LOG_MACDECODE flag is set on. Without this information the logging is misleading as there is no reference to the VLAN header. [12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 [12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1 Fixes: 83e96d443b37 ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

net/ipv4: always honour route mtu during forwarding

2020-10-29T08:54:56Z

[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ] Documentation/networking/ip-sysctl.txt:46 says: ip_forward_use_pmtu - BOOLEAN By default we don't trust protocol path MTUs while forwarding because they could be easily forged and can lead to unwanted fragmentation by the router. You only need to enable this if you have user-space software which tries to discover path mtus by itself and depends on the kernel honoring this information. This is normally not the case. Default: 0 (disabled) Possible values: 0 - disabled 1 - enabled Which makes it pretty clear that setting it to 1 is a potential security/safety/DoS issue, and yet it is entirely reasonable to want forwarded traffic to honour explicitly administrator configured route mtus (instead of defaulting to device mtu). Indeed, I can't think of a single reason why you wouldn't want to. Since you configured a route mtu you probably know better... It is pretty common to have a higher device mtu to allow receiving large (jumbo) frames, while having some routes via that interface (potentially including the default route to the internet) specify a lower mtu. Note that ipv6 forwarding uses device mtu unless the route is locked (in which case it will use the route mtu). This approach is not usable for IPv4 where an 'mtu lock' on a route also has the side effect of disabling TCP path mtu discovery via disabling the IPv4 DF (don't frag) bit on all outgoing frames. I'm not aware of a way to lock a route from an IPv6 RA, so that also potentially seems wrong. Signed-off-by: Maciej Żenczykowski Cc: Eric Dumazet Cc: Willem de Bruijn Cc: Lorenzo Colitti Cc: Sunmeet Gill (Sunny) Cc: Vinay Paradkar Cc: Tyler Wear Cc: David Ahern Reviewed-by: Eric Dumazet Signed-off-by: Greg Kroah-Hartman

Bluetooth: Disconnect if E0 is used for Level 4

2020-10-17T08:12:57Z

commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream. E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Cc: Hans-Christian Noren Egtvedt Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix update of connection state in `hci_encrypt_cfm`

2020-10-17T08:12:57Z

commit 339ddaa626995bc6218972ca241471f3717cc5f4 upstream. Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to connect to my Bluetooth headset properly anymore. While connecting to the device would eventually succeed, bluetoothd seemed to be confused about the current connection state where the state was flapping hence and forth. Bisecting this issue led to commit 3ca44c16b0dc (Bluetooth: Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which refactored `hci_encrypt_cfm` to also handle updating the connection state. The commit in question changed the code to call `hci_connect_cfm` inside `hci_encrypt_cfm` and to change the connection state. But with the conversion, we now only update the connection state if a status was set already. In fact, the reverse should be true: the status should be updated if no status is yet set. So let's fix the isuse by reversing the condition. Fixes: 3ca44c16b0dc ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm") Signed-off-by: Patrick Steinhardt Acked-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: Consolidate encryption handling in hci_encrypt_cfm

2020-10-17T08:12:57Z

commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream. This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Cc: Hans-Christian Noren Egtvedt Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix calling sk_filter on non-socket based channel

2020-10-17T08:12:56Z

commit f19425641cb2572a33cb074d5e30283720bd4d22 upstream. Only sockets will have the chan->data set to an actual sk, channels like A2MP would have its own data which would likely cause a crash when calling sk_filter, in order to fix this a new callback has been introduced so channels can implement their own filtering if necessary. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected by khugepaged

2020-10-14T08:31:26Z

commit 4aab2be0983031a05cb4a19696c9da5749523426 upstream. When memory is hotplug added or removed the min_free_kbytes should be recalculated based on what is expected by khugepaged. Currently after hotplug, min_free_kbytes will be set to a lower default and higher default set when THP enabled is lost. This change restores min_free_kbytes as expected for THP consumers. [vijayb@linux.microsoft.com: v5] Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com Fixes: f000565adb77 ("thp: set recommended min free kbytes") Signed-off-by: Vijay Balakrishna Signed-off-by: Andrew Morton Reviewed-by: Pavel Tatashin Acked-by: Michal Hocko Cc: Allen Pais Cc: Andrea Arcangeli Cc: "Kirill A. Shutemov" Cc: Oleg Nesterov Cc: Song Liu Cc: Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

xfrm: clone XFRMA_REPLAY_ESN_VAL in xfrm_do_migrate

2020-10-14T08:31:24Z

[ Upstream commit 91a46c6d1b4fcbfa4773df9421b8ad3e58088101 ] XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE v1->v2: - move curleft cloning to a separate patch Fixes: af2f464e326e ("xfrm: Assign esn pointers when cloning a state") Signed-off-by: Antony Antony Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts

2020-10-14T08:31:21Z

commit 6735b4632def0640dbdf4eb9f99816aca18c4f16 upstream. syzbot has reported an issue in the framebuffer layer, where a malicious user may overflow our built-in font data buffers. In order to perform a reliable range check, subsystems need to know `FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor, `struct console_font` does not contain `FONTDATAMAX`, and is part of the UAPI, making it infeasible to modify it. For user-provided fonts, the framebuffer layer resolves this issue by reserving four extra words at the beginning of data buffers. Later, whenever a function needs to access them, it simply uses the following macros: Recently we have gathered all the above macros to . Let us do the same thing for built-in fonts, prepend four extra words (including `FONTDATAMAX`) to their data buffers, so that subsystems can use these macros for all fonts, no matter built-in or user-provided. This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h". Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd Signed-off-by: Peilin Ye Reviewed-by: Greg Kroah-Hartman Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com Signed-off-by: Greg Kroah-Hartman