user/sven/linux.git/include, branch v4.19.236

net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()

2022-03-23T08:10:44Z

[ Upstream commit 4ee06de7729d795773145692e246a06448b1eb7a ] This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

arm64: entry: Add vectors that have the bhb mitigation sequences

2022-03-23T08:10:43Z

commit ba2689234be92024e5635d30fe744f4853ad97db upstream. Some CPUs affected by Spectre-BHB need a sequence of branches, or a firmware call to be run before any indirect branch. This needs to go in the vectors. No CPU needs both. While this can be patched in, it would run on all CPUs as there is a single set of vectors. If only one part of a big/little combination is affected, the unaffected CPUs have to run the mitigation too. Create extra vectors that include the sequence. Subsequent patches will allow affected CPUs to select this set of vectors. Later patches will modify the loop count to match what the CPU requires. Reviewed-by: Catalin Marinas Signed-off-by: James Morse Signed-off-by: Greg Kroah-Hartman

sched/topology: Make sched_init_numa() use a set for the deduplicating sort

2022-03-23T08:10:41Z

commit 620a6dc40754dc218f5b6389b5d335e9a107fd29 upstream. The deduplicating sort in sched_init_numa() assumes that the first line in the distance table contains all unique values in the entire table. I've been trying to pen what this exactly means for the topology, but it's not straightforward. For instance, topology.c uses this example: node 0 1 2 3 0: 10 20 20 30 1: 20 10 20 20 2: 20 20 10 20 3: 30 20 20 10 0 ----- 1 | / | | / | | / | 2 ----- 3 Which works out just fine. However, if we swap nodes 0 and 1: 1 ----- 0 | / | | / | | / | 2 ----- 3 we get this distance table: node 0 1 2 3 0: 10 20 20 20 1: 20 10 20 30 2: 20 20 10 20 3: 20 30 20 10 Which breaks the deduplicating sort (non-representative first line). In this case this would just be a renumbering exercise, but it so happens that we can have a deduplicating sort that goes through the whole table in O(n²) at the extra cost of a temporary memory allocation (i.e. any form of set). The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following this, implement the set as a 256-bits bitmap. Should this not be satisfactory (i.e. we want to support 32-bit values), then we'll have to go for some other sparse set implementation. This has the added benefit of letting us allocate just the right amount of memory for sched_domains_numa_distance[], rather than an arbitrary (nr_node_ids + 1). Note: DT binding equivalent (distance-map) decodes distances as 32-bit values. Signed-off-by: Valentin Schneider Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210122123943.1217-2-valentin.schneider@arm.com Signed-off-by: dann frazier Signed-off-by: Greg Kroah-Hartman

xfrm: Check if_id in xfrm_migrate

2022-03-23T08:10:40Z

[ Upstream commit c1aca3080e382886e2e58e809787441984a2f89b ] This patch enables distinguishing SAs and SPs based on if_id during the xfrm_migrate flow. This ensures support for xfrm interfaces throughout the SA/SP lifecycle. When there are multiple existing SPs with the same direction, the same xfrm_selector and different endpoint addresses, xfrm_migrate might fail with ENODATA. Specifically, the code path for performing xfrm_migrate is: Stage 1: find policy to migrate with xfrm_migrate_policy_find(sel, dir, type, net) Stage 2: find and update state(s) with xfrm_migrate_state_find(mp, net) Stage 3: update endpoint address(es) of template(s) with xfrm_policy_migrate(pol, m, num_migrate) Currently "Stage 1" always returns the first xfrm_policy that matches, and "Stage 3" looks for the xfrm_tmpl that matches the old endpoint address. Thus if there are multiple xfrm_policy with same selector, direction, type and net, "Stage 1" might rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA because it cannot find a xfrm_tmpl with the matching endpoint address. The fix is to allow userspace to pass an if_id and add if_id to the matching rule in Stage 1 and Stage 2 since if_id is a unique ID for xfrm_policy and xfrm_state. For compatibility, if_id will only be checked if the attribute is set. Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/1668886 Signed-off-by: Yan Yan Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

virtio: acknowledge all features before access

2022-03-16T12:20:27Z

commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream. The feature negotiation was designed in a way that makes it possible for devices to know which config fields will be accessed by drivers. This is broken since commit 404123c2db79 ("virtio: allow drivers to validate features") with fallout in at least block and net. We have a partial work-around in commit 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") which at least lets devices find out which format should config space have, but this is a partial fix: guests should not access config space without acknowledging features since otherwise we'll never be able to change the config space format. To fix, split finalize_features from virtio_finalize_features and call finalize_features with all feature bits before validation, and then - if validation changed any bits - once again after. Since virtio_finalize_features no longer writes out features rename it to virtio_features_ok - since that is what it does: checks that features are ok with the device. As a side effect, this also reduces the amount of hypervisor accesses - we now only acknowledge features once unless we are clearing any features when validating (which is uncommon). IRC I think that this was more or less always the intent in the spec but unfortunately the way the spec is worded does not say this explicitly, I plan to address this at the spec level, too. Acked-by: Jason Wang Cc: stable@vger.kernel.org Fixes: 404123c2db79 ("virtio: allow drivers to validate features") Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") Cc: "Halil Pasic" Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

virtio: unexport virtio_finalize_features

2022-03-16T12:20:27Z

commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream. virtio_finalize_features is only used internally within virtio. No reason to export it. Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman

net/mlx5: Fix size field in bufferx_reg struct

2022-03-16T12:20:26Z

[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by: Mohammad Kabat Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

xen/gnttab: fix gnttab_end_foreign_access() without page specified

2022-03-11T09:15:13Z

Commit 42baefac638f06314298087394b982ead9ec444b upstream. gnttab_end_foreign_access() is used to free a grant reference and optionally to free the associated page. In case the grant is still in use by the other side processing is being deferred. This leads to a problem in case no page to be freed is specified by the caller: the caller doesn't know that the page is still mapped by the other side and thus should not be used for other purposes. The correct way to handle this situation is to take an additional reference to the granted page in case handling is being deferred and to drop that reference when the grant reference could be freed finally. This requires that there are no users of gnttab_end_foreign_access() left directly repurposing the granted page after the call, as this might result in clobbered data or information leaks via the not yet freed grant reference. This is part of CVE-2022-23041 / XSA-396. Reported-by: Simon Gaiser Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Signed-off-by: Greg Kroah-Hartman

xen: remove gnttab_query_foreign_access()

2022-03-11T09:15:13Z

Commit 1dbd11ca75fe664d3e54607547771d021f531f59 upstream. Remove gnttab_query_foreign_access(), as it is unused and unsafe to use. All previous use cases assumed a grant would not be in use after gnttab_query_foreign_access() returned 0. This information is useless in best case, as it only refers to a situation in the past, which could have changed already. Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Signed-off-by: Greg Kroah-Hartman

xen/grant-table: add gnttab_try_end_foreign_access()

2022-03-11T09:15:12Z

Commit 6b1775f26a2da2b05a6dc8ec2b5d14e9a4701a1a upstream. Add a new grant table function gnttab_try_end_foreign_access(), which will remove and free a grant if it is not in use. Its main use case is to either free a grant if it is no longer in use, or to take some other action if it is still in use. This other action can be an error exit, or (e.g. in the case of blkfront persistent grant feature) some special handling. This is CVE-2022-23036, CVE-2022-23038 / part of XSA-396. Reported-by: Demi Marie Obenour Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Signed-off-by: Greg Kroah-Hartman