user/sven/linux.git/include, branch v4.9.157

HID: debug: fix the ring buffer implementation

2019-02-15T07:07:39Z

commit 13054abbaa4f1fd4e6f3b4b63439ec033b4c8035 upstream. Ring buffer implementation in hid_debug_event() and hid_debug_events_read() is strange allowing lost or corrupted data. After commit 717adfdaf147 ("HID: debug: check length before copy_to_user()") it is possible to enter an infinite loop in hid_debug_events_read() by providing 0 as count, this locks up a system. Fix this by rewriting the ring buffer implementation with kfifo and simplify the code. This fixes CVE-2019-3819. v2: fix an execution logic and add a comment v3: use __set_current_state() instead of set_current_state() Backport to v4.9: some tree-wide patches are missing in v4.9 so cherry-pick relevant pieces from: * 6396bb22151 ("treewide: kzalloc() -> kcalloc()") * a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement") * 174cd4b1e5fb ("sched/headers: Prepare to move signal wakeup & sigpending methods from into ") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1669187 Cc: stable@vger.kernel.org # v4.18+ Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping") Fixes: 717adfdaf147 ("HID: debug: check length before copy_to_user()") Signed-off-by: Vladis Dronov Reviewed-by: Oleg Nesterov Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

oom, oom_reaper: do not enqueue same task twice

2019-02-12T18:45:02Z

commit 9bcdeb51bd7d2ae9fe65ea4d60643d2aeef5bfe3 upstream. Arkadiusz reported that enabling memcg's group oom killing causes strange memcg statistics where there is no task in a memcg despite the number of tasks in that memcg is not 0. It turned out that there is a bug in wake_oom_reaper() which allows enqueuing same task twice which makes impossible to decrease the number of tasks in that memcg due to a refcount leak. This bug existed since the OOM reaper became invokable from task_will_free_mem(current) path in out_of_memory() in Linux 4.7, T1@P1 |T2@P1 |T3@P1 |OOM reaper ----------+----------+----------+------------ # Processing an OOM victim in a different memcg domain. try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) out_of_memory() oom_kill_process(P1) do_send_sig_info(SIGKILL, @P1) mark_oom_victim(T1@P1) wake_oom_reaper(T1@P1) # T1@P1 is enqueued. mutex_unlock(&oom_lock) out_of_memory() mark_oom_victim(T2@P1) wake_oom_reaper(T2@P1) # T2@P1 is enqueued. mutex_unlock(&oom_lock) out_of_memory() mark_oom_victim(T1@P1) wake_oom_reaper(T1@P1) # T1@P1 is enqueued again due to oom_reaper_list == T2@P1 && T1@P1->oom_reaper_list == NULL. mutex_unlock(&oom_lock) # Completed processing an OOM victim in a different memcg domain. spin_lock(&oom_reaper_lock) # T1P1 is dequeued. spin_unlock(&oom_reaper_lock) but memcg's group oom killing made it easier to trigger this bug by calling wake_oom_reaper() on the same task from one out_of_memory() request. Fix this bug using an approach used by commit 855b018325737f76 ("oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task"). As a side effect of this patch, this patch also avoids enqueuing multiple threads sharing memory via task_will_free_mem(current) path. Link: http://lkml.kernel.org/r/e865a044-2c10-9858-f4ef-254bc71d6cc2@i-love.sakura.ne.jp Link: http://lkml.kernel.org/r/5ee34fc6-1485-34f8-8790-903ddabaa809@i-love.sakura.ne.jp Fixes: af8e15cc85a25315 ("oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head") Signed-off-by: Tetsuo Handa Reported-by: Arkadiusz Miskiewicz Tested-by: Arkadiusz Miskiewicz Acked-by: Michal Hocko Acked-by: Roman Gushchin Cc: Tejun Heo Cc: Aleksa Sarai Cc: Jay Kamat Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ALSA: compress: Fix stop handling on compressed capture streams

2019-02-12T18:45:00Z

commit 4f2ab5e1d13d6aa77c55f4914659784efd776eb4 upstream. It is normal user behaviour to start, stop, then start a stream again without closing it. Currently this works for compressed playback streams but not capture ones. The states on a compressed capture stream go directly from OPEN to PREPARED, unlike a playback stream which moves to SETUP and waits for a write of data before moving to PREPARED. Currently however, when a stop is sent the state is set to SETUP for both types of streams. This leaves a capture stream in the situation where a new start can't be sent as that requires the state to be PREPARED and a new set_params can't be sent as that requires the state to be OPEN. The only option being to close the stream, and then reopen. Correct this issues by allowing snd_compr_drain_notify to set the state depending on the stream direction, as we already do in set_params. Fixes: 49bb6402f1aa ("ALSA: compress_core: Add support for capture streams") Signed-off-by: Charles Keepax Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

drbd: Avoid Clang warning about pointless switch statment

2019-02-12T18:44:56Z

[ Upstream commit a52c5a16cf19d8a85831bb1b915a221dd4ffae3c ] There are several warnings from Clang about no case statement matching the constant 0: In file included from drivers/block/drbd/drbd_receiver.c:48: In file included from drivers/block/drbd/drbd_int.h:48: In file included from ./include/linux/drbd_genl_api.h:54: In file included from ./include/linux/genl_magic_struct.h:236: ./include/linux/drbd_genl.h:321:1: warning: no case matching constant switch condition '0' GENL_struct(DRBD_NLA_HELPER, 24, drbd_helper_info, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/genl_magic_struct.h:220:10: note: expanded from macro 'GENL_struct' switch (0) { ^ Silence this warning by adding a 'case 0:' statement. Additionally, adjust the alignment of the statements in the ct_assert_unique macro to avoid a checkpatch warning. This solution was originally sent by Arnd Bergmann with a default case statement: https://lore.kernel.org/patchwork/patch/756723/ Link: https://github.com/ClangBuiltLinux/linux/issues/43 Suggested-by: Lars Ellenberg Signed-off-by: Nathan Chancellor Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

drivers: core: Remove glue dirs from sysfs earlier

2019-02-06T16:33:29Z

commit 726e41097920a73e4c7c33385dcc0debb1281e18 upstream. For devices with a class, we create a "glue" directory between the parent device and the new device with the class name. This directory is never "explicitely" removed when empty however, this is left to the implicit sysfs removal done by kobject_release() when the object loses its last reference via kobject_put(). This is problematic because as long as it's not been removed from sysfs, it is still present in the class kset and in sysfs directory structure. The presence in the class kset exposes a use after free bug fixed by the previous patch, but the presence in sysfs means that until the kobject is released, which can take a while (especially with kobject debugging), any attempt at re-creating such as binding a new device for that class/parent pair, will result in a sysfs duplicate file name error. This fixes it by instead doing an explicit kobject_del() when the glue dir is empty, by keeping track of the number of child devices of the gluedir. This is made easy by the fact that all glue dir operations are done with a global mutex, and there's already a function (cleanup_glue_dir) called in all the right places taking that mutex that can be enhanced for this. It appears that this was in fact the intent of the function, but the implementation was wrong. Signed-off-by: Benjamin Herrenschmidt Acked-by: Linus Torvalds Signed-off-by: Zubin Mithra Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

ipvlan, l3mdev: fix broken l3s mode wrt local routes

2019-02-06T16:33:27Z

[ Upstream commit d5256083f62e2720f75bb3c5a928a0afe47d6bc3 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode") Signed-off-by: Daniel Borkmann Cc: Mahesh Bandewar Cc: David Ahern Cc: Florian Westphal Cc: Martynas Pumputis Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

compiler.h: enable builtin overflow checkers and add fallback code

2019-01-31T07:12:35Z

commit f0907827a8a9152aedac2833ed1b674a7b2a44f2 upstream. This adds wrappers for the __builtin overflow checkers present in gcc 5.1+ as well as fallback implementations for earlier compilers. It's not that easy to implement the fully generic __builtin_X_overflow(T1 a, T2 b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are the same. We obviously don't want the wrappers to have different semantics depending on $GCC_VERSION, so we also insist on that even when using the builtins. There are a few problems with the 'a+b < a' idiom for checking for overflow: For signed types, it relies on undefined behaviour and is not actually complete (it doesn't check underflow; e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it is wrong for all types (signed and unsigned) narrower than int. Similarly, when a and b does not have the same type, there are subtle cases like u32 a; if (a + sizeof(foo) < a) return -EOVERFLOW; a += sizeof(foo); where the test is always false on 64 bit platforms. Add to that that it is not always possible to determine the types involved at a glance. The new overflow.h is somewhat bulky, but that's mostly a result of trying to be type-generic, complete (e.g. catching not only overflow but also signed underflow) and not relying on undefined behaviour. Linus is of course right [1] that for unsigned subtraction a-b, the right way to check for overflow (underflow) is "b > a" and not "__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases covered here, and included mostly for completeness. So is it worth it? I think it is, if nothing else for the documentation value of seeing if (check_add_overflow(a, b, &d)) return -EGOAWAY; do_stuff_with(d); instead of the open-coded (and possibly wrong and/or incomplete and/or UBsan-tickling) if (a+b < a) return -EGOAWAY; do_stuff_with(a+b); While gcc does recognize the 'a+b < a' idiom for testing unsigned add overflow, it doesn't do nearly as good for unsigned multiplication (there's also no single well-established idiom). So using check_mul_overflow in kcalloc and friends may also make gcc generate slightly better code. [1] https://lkml.org/lkml/2015/11/2/658 Signed-off-by: Rasmus Villemoes Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman

net: ipv4: Fix memory leak in network namespace dismantle

2019-01-31T07:12:33Z

[ Upstream commit f97f4dd8b3bb9d0993d2491e0f22024c68109184 ] IPv4 routing tables are flushed in two cases: 1. In response to events in the netdev and inetaddr notification chains 2. When a network namespace is being dismantled In both cases only routes associated with a dead nexthop group are flushed. However, a nexthop group will only be marked as dead in case it is populated with actual nexthops using a nexthop device. This is not the case when the route in question is an error route (e.g., 'blackhole', 'unreachable'). Therefore, when a network namespace is being dismantled such routes are not flushed and leaked [1]. To reproduce: # ip netns add blue # ip -n blue route add unreachable 192.0.2.0/24 # ip netns del blue Fix this by not skipping error routes that are not marked with RTNH_F_DEAD when flushing the routing tables. To prevent the flushing of such routes in case #1, add a parameter to fib_table_flush() that indicates if the table is flushed as part of namespace dismantle or not. Note that this problem does not exist in IPv6 since error routes are associated with the loopback device. [1] unreferenced object 0xffff888066650338 (size 56): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba.... e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............ backtrace: [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff unreferenced object 0xffff888061621c88 (size 48): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_.... backtrace: [<00000000733609e3>] fib_table_insert+0x978/0x1500 [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff Fixes: 8cced9eff1d4 ("[NETNS]: Enable routing configuration in non-initial namespace.") Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: Fix usage of pskb_trim_rcsum

2019-01-31T07:12:33Z

[ Upstream commit 6c57f0458022298e4da1729c67bd33ce41c14e7a ] In certain cases, pskb_trim_rcsum() may change skb pointers. Reinitialize header pointers afterwards to avoid potential use-after-frees. Add a note in the documentation of pskb_trim_rcsum(). Found by KASAN. Signed-off-by: Ross Lagerwall Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

locking/qspinlock: Pull in asm/byteorder.h to ensure correct endianness

2019-01-26T08:38:36Z

This commit is not required upstream, but is required for the 4.9.y stable series. Upstream commit 101110f6271c ("Kbuild: always define endianess in kconfig.h") ensures that either __LITTLE_ENDIAN or __BIG_ENDIAN is defined to reflect the endianness of the target CPU architecture regardless of whether or not has been #included. The upstream definition of 'struct qspinlock' relies on this property. Unfortunately, the 4.9.y stable series does not provide this guarantee, so the 'spin_unlock()' routine can erroneously treat the underlying lockword as big-endian on little-endian architectures using native qspinlock (i.e. x86_64 without PV) if the caller has not included . This can lead to hangs such as the one in 'i915_gem_request()' reported via bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202063 Fix the issue by ensuring that is #included in , where 'struct qspinlock' is defined. Cc: # 4.9 Signed-off-by: Dave Airlie [will: wrote commit message] Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman