user/sven/linux.git/include, branch v4.9.162

sched/sysctl: Fix attributes of some extern declarations

2019-02-27T09:07:03Z

commit a9903f04e0a4ea522d959c2f287cdf0ab029e324 upstream. The definition of sysctl_sched_migration_cost, sysctl_sched_nr_migrate and sysctl_sched_time_avg includes the attribute const_debug. This attribute is not part of the extern declaration of these variables in include/linux/sched/sysctl.h, while it is in kernel/sched/sched.h, and as a result Clang generates warnings like this: kernel/sched/sched.h:1618:33: warning: section attribute is specified on redeclared variable [-Wsection] extern const_debug unsigned int sysctl_sched_time_avg; ^ ./include/linux/sched/sysctl.h:42:21: note: previous declaration is here extern unsigned int sysctl_sched_time_avg; The header only declares the variables when CONFIG_SCHED_DEBUG is defined, therefore it is not necessary to duplicate the definition of const_debug. Instead we can use the attribute __read_mostly, which is the expansion of const_debug when CONFIG_SCHED_DEBUG=y is set. Signed-off-by: Matthias Kaehlcke Reviewed-by: Nick Desaulniers Cc: Douglas Anderson Cc: Guenter Roeck Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Shile Zhang Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20171030180816.170850-1-mka@chromium.org Signed-off-by: Ingo Molnar [nc: Backport to 4.9] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK

2019-02-27T09:07:01Z

commit 0773cea37470f8e080c510fe720fc356cf35df3a upstream Besides reusing existing code this removes the special case handling for 64-bit masks, which causes clang to raise a shift count overflow warning due to https://bugs.llvm.org//show_bug.cgi?id=10030. Suggested-by: Dmitry Torokhov Signed-off-by: Matthias Kaehlcke Cc: Grant Grundler Cc: Greg Hackmann Cc: Michael Davidson Cc: John Stultz Link: http://lkml.kernel.org/r/20170418233037.70990-1-mka@chromium.org Signed-off-by: Thomas Gleixner [nc: cycle_t wasn't eliminated until commit a5a1d1c2914b ("clocksource: Use a plain u64 instead of cycle_t") in v4.10] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

KEYS: user: Align the payload buffer

2019-02-27T09:07:00Z

commit cc1780fc42c76c705dd07ea123f1143dc5057630 upstream. Align the payload of "user" and "logon" keys so that users of the keyrings service can access it as a struct that requires more than 2-byte alignment. fscrypt currently does this which results in the read of fscrypt_key::size being misaligned as it needs 4-byte alignment. Align to __alignof__(u64) rather than __alignof__(long) since in the future it's conceivable that people would use structs beginning with u64, which on some platforms would require more than 'long' alignment. Reported-by: Aaro Koskinen Fixes: 2aa349f6e37c ("[PATCH] Keys: Export user-defined keyring operations") Fixes: 88bd6ccdcdd6 ("ext4 crypto: add encryption key management facilities") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Tested-by: Aaro Koskinen Signed-off-by: David Howells Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman

ax25: fix possible use-after-free

2019-02-23T08:05:59Z

commit 63530aba7826a0f8e129874df9c4d264f9db3f9e upstream. syzbot found that ax25 routes where not properly protected against concurrent use [1]. In this particular report the bug happened while copying ax25->digipeat. Fix this problem by making sure we call ax25_get_route() while ax25_route_lock is held, so that no modification could happen while using the route. The current two ax25_get_route() callers do not sleep, so this change should be fine. Once we do that, ax25_get_route() no longer needs to grab a reference on the found route. [1] ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline] BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113 Read of size 66 at addr ffff888066641a80 by task syz-executor2/531 ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x24/0x50 mm/kasan/common.c:130 memcpy include/linux/string.h:352 [inline] kmemdup+0x42/0x60 mm/util.c:113 kmemdup include/linux/string.h:425 [inline] ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224 __sys_connect+0x357/0x490 net/socket.c:1664 __do_sys_connect net/socket.c:1675 [inline] __se_sys_connect net/socket.c:1672 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1672 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458099 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099 RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4 R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff Allocated by task 526: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:496 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504 ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609 kmalloc include/linux/slab.h:545 [inline] ax25_rt_add net/ax25/ax25_route.c:95 [inline] ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de Freed by task 550: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466 __cache_free mm/slab.c:3487 [inline] kfree+0xcf/0x230 mm/slab.c:3806 ax25_rt_add net/ax25/ax25_route.c:92 [inline] ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763 sock_do_ioctl+0xe2/0x400 net/socket.c:950 sock_ioctl+0x32f/0x6c0 net/socket.c:1074 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888066641a80 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of 96-byte region [ffff888066641a80, ffff888066641ae0) The buggy address belongs to the page: page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0 flags: 0x1fffc0000000200(slab) ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0 raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc >ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Signed-off-by: Eric Dumazet Cc: Ralf Baechle Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ipv4: use a dedicated counter for icmp_v4 redirect packets

2019-02-23T08:05:59Z

[ Upstream commit c09551c6ff7fe16a79a42133bcecba5fc2fc3291 ] According to the algorithm described in the comment block at the beginning of ip_rt_send_redirect, the host should try to send 'ip_rt_redirect_number' ICMP redirect packets with an exponential backoff and then stop sending them at all assuming that the destination ignores redirects. If the device has previously sent some ICMP error packets that are rate-limited (e.g TTL expired) and continues to receive traffic, the redirect packets will never be transmitted. This happens since peer->rate_tokens will be typically greater than 'ip_rt_redirect_number' and so it will never be reset even if the redirect silence timeout (ip_rt_redirect_silence) has elapsed without receiving any packet requiring redirects. Fix it by using a dedicated counter for the number of ICMP redirect packets that has been sent by the host I have not been able to identify a given commit that introduced the issue since ip_rt_send_redirect implements the same rate-limiting algorithm from commit 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Lorenzo Bianconi Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: clear icsk_backoff in tcp_write_queue_purge()

2019-02-23T08:05:59Z

[ Upstream commit 04c03114be82194d4a4858d41dba8e286ad1787c ] soukjin bae reported a crash in tcp_v4_err() handling ICMP_DEST_UNREACH after tcp_write_queue_head(sk) returned a NULL pointer. Current logic should have prevented this : if (seq != tp->snd_una || !icsk->icsk_retransmits || !icsk->icsk_backoff || fastopen) break; Problem is the write queue might have been purged and icsk_backoff has not been cleared. Signed-off-by: Eric Dumazet Reported-by: soukjin bae Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: Add header for usage of fls64()

2019-02-23T08:05:58Z

[ Upstream commit 8681ef1f3d295bd3600315325f3b3396d76d02f6 ] Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian") Suggested-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: Fix for_each_netdev_feature on Big endian

2019-02-23T08:05:58Z

[ Upstream commit 3b89ea9c5902acccdbbdec307c85edd1bf52515e ] The features attribute is of type u64 and stored in the native endianes on the system. The for_each_set_bit() macro takes a pointer to a 32 bit array and goes over the bits in this area. On little Endian systems this also works with an u64 as the most significant bit is on the highest address, but on big endian the words are swapped. When we expect bit 15 here we get bit 47 (15 + 32). This patch converts it more or less to its own for_each_set_bit() implementation which works on 64 bit integers directly. This is then completely in host endianness and should work like expected. Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

uapi/if_ether.h: move __UAPI_DEF_ETHHDR libc define

2019-02-20T09:18:35Z

commit da360299b6734135a5f66d7db458dcc7801c826a upstream. This fixes a compile problem of some user space applications by not including linux/libc-compat.h in uapi/if_ether.h. linux/libc-compat.h checks which "features" the header files, included from the libc, provide to make the Linux kernel uapi header files only provide no conflicting structures and enums. If a user application mixes kernel headers and libc headers it could happen that linux/libc-compat.h gets included too early where not all other libc headers are included yet. Then the linux/libc-compat.h would not prevent all the redefinitions and we run into compile problems. This patch removes the include of linux/libc-compat.h from uapi/if_ether.h to fix the recently introduced case, but not all as this is more or less impossible. It is no problem to do the check directly in the if_ether.h file and not in libc-compat.h as this does not need any fancy glibc header detection as glibc never provided struct ethhdr and should define __UAPI_DEF_ETHHDR by them self when they will provide this. The following test program did not compile correctly any more: #include #include #include int main(void) { return 0; } Fixes: 6926e041a892 ("uapi/if_ether.h: prevent redefinition of struct ethhdr") Reported-by: Guillaume Nault Cc: # 4.15 Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller Cc: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

netfilter: nf_tables: fix mismatch in big-endian system

2019-02-20T09:18:34Z

commit 10596608c4d62cb8c1c2b806debcbd32fe657e71 upstream. Currently, there are two different methods to store an u16 integer to the u32 data register. For example: u32 *dest = ®s->data[priv->dreg]; 1. *dest = 0; *(u16 *) dest = val_u16; 2. *dest = val_u16; For method 1, the u16 value will be stored like this, either in big-endian or little-endian system: 0 15 31 +-+-+-+-+-+-+-+-+-+-+-+-+ | Value | 0 | +-+-+-+-+-+-+-+-+-+-+-+-+ For method 2, in little-endian system, the u16 value will be the same as listed above. But in big-endian system, the u16 value will be stored like this: 0 15 31 +-+-+-+-+-+-+-+-+-+-+-+-+ | 0 | Value | +-+-+-+-+-+-+-+-+-+-+-+-+ So later we use "memcmp(®s->data[priv->sreg], data, 2);" to do compare in nft_cmp, nft_lookup expr ..., method 2 will get the wrong result in big-endian system, as 0~15 bits will always be zero. For the similar reason, when loading an u16 value from the u32 data register, we should use "*(u16 *) sreg;" instead of "(u16)*sreg;", the 2nd method will get the wrong value in the big-endian system. So introduce some wrapper functions to store/load an u8 or u16 integer to/from the u32 data register, and use them in the right place. Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman