user/sven/linux.git/include, branch v4.9.193

ip6: fix skb leak in ip6frag_expire_frag_queue()

2019-09-16T06:19:33Z

commit 47d3d7fdb10a21c223036b58bd70ffdc24a472c4 upstream. Since ip6frag_expire_frag_queue() now pulls the head skb from frag queue, we should no longer use skb_get(), since this leads to an skb leak. Stefan Bader initially reported a problem in 4.4.stable [1] caused by the skb_get(), so this patch should also fix this issue. 296583.091021] kernel BUG at /build/linux-6VmqmP/linux-4.4.0/net/core/skbuff.c:1207! [296583.091734] Call Trace: [296583.091749] [] __pskb_pull_tail+0x50/0x350 [296583.091764] [] _decode_session6+0x26a/0x400 [296583.091779] [] __xfrm_decode_session+0x39/0x50 [296583.091795] [] icmpv6_route_lookup+0xf0/0x1c0 [296583.091809] [] icmp6_send+0x5e1/0x940 [296583.091823] [] ? __netif_receive_skb+0x18/0x60 [296583.091838] [] ? netif_receive_skb_internal+0x32/0xa0 [296583.091858] [] ? ixgbe_clean_rx_irq+0x594/0xac0 [ixgbe] [296583.091876] [] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6] [296583.091893] [] icmpv6_send+0x21/0x30 [296583.091906] [] ip6_expire_frag_queue+0xe0/0x120 [296583.091921] [] nf_ct_frag6_expire+0x1f/0x30 [nf_defrag_ipv6] [296583.091938] [] call_timer_fn+0x37/0x140 [296583.091951] [] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6] [296583.091968] [] run_timer_softirq+0x234/0x330 [296583.091982] [] __do_softirq+0x109/0x2b0 Fixes: d4289fcc9b16 ("net: IP6 defrag: use rbtrees for IPv6 defrag") Signed-off-by: Eric Dumazet Reported-by: Stefan Bader Cc: Peter Oskolkov Cc: Florian Westphal Signed-off-by: David S. Miller Signed-off-by: Baolin Wang Signed-off-by: Greg Kroah-Hartman

xfrm: clean up xfrm protocol checks

2019-09-16T06:19:32Z

commit dbb2483b2a46fbaf833cfb5deb5ed9cace9c7399 upstream. In commit 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") I introduced a check for xfrm protocol, but according to Herbert IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so it should be removed from validate_tmpl(). And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific protocols, this is why xfrm_state_flush() could still miss IPPROTO_ROUTING, which leads that those entries are left in net->xfrm.state_all before exit net. Fix this by replacing IPSEC_PROTO_ANY with zero. This patch also extracts the check from validate_tmpl() to xfrm_id_proto_valid() and uses it in parse_ipsecrequest(). With this, no other protocols should be added into xfrm. Fixes: 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com Cc: Steffen Klassert Cc: Herbert Xu Signed-off-by: Cong Wang Acked-by: Herbert Xu Signed-off-by: Steffen Klassert Signed-off-by: Zubin Mithra Signed-off-by: Greg Kroah-Hartman

libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer

2019-09-10T09:31:03Z

[ Upstream commit 5c498950f730aa17c5f8a2cdcb903524e4002ed2 ] Signed-off-by: Luis Henriques Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin

gpio: Fix build error of function redefinition

2019-09-10T09:31:00Z

[ Upstream commit 68e03b85474a51ec1921b4d13204782594ef7223 ] when do randbuilding, I got this error: In file included from drivers/hwmon/pmbus/ucd9000.c:19:0: ./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/hwmon/pmbus/ucd9000.c:18:0: ./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot Fixes: 964cb341882f ("gpio: move pincontrol calls to ") Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

tcp: fix tcp_rtx_queue_tail in case of empty retransmit queue

2019-09-06T08:19:44Z

Commit 8c3088f895a0 ("tcp: be more careful in tcp_fragment()") triggers following stack trace: [25244.848046] kernel BUG at ./include/linux/skbuff.h:1406! [25244.859335] RIP: 0010:skb_queue_prev+0x9/0xc [25244.888167] Call Trace: [25244.889182] [25244.890001] tcp_fragment+0x9c/0x2cf [25244.891295] tcp_write_xmit+0x68f/0x988 [25244.892732] __tcp_push_pending_frames+0x3b/0xa0 [25244.894347] tcp_data_snd_check+0x2a/0xc8 [25244.895775] tcp_rcv_established+0x2a8/0x30d [25244.897282] tcp_v4_do_rcv+0xb2/0x158 [25244.898666] tcp_v4_rcv+0x692/0x956 [25244.899959] ip_local_deliver_finish+0xeb/0x169 [25244.901547] __netif_receive_skb_core+0x51c/0x582 [25244.903193] ? inet_gro_receive+0x239/0x247 [25244.904756] netif_receive_skb_internal+0xab/0xc6 [25244.906395] napi_gro_receive+0x8a/0xc0 [25244.907760] receive_buf+0x9a1/0x9cd [25244.909160] ? load_balance+0x17a/0x7b7 [25244.910536] ? vring_unmap_one+0x18/0x61 [25244.911932] ? detach_buf+0x60/0xfa [25244.913234] virtnet_poll+0x128/0x1e1 [25244.914607] net_rx_action+0x12a/0x2b1 [25244.915953] __do_softirq+0x11c/0x26b [25244.917269] ? handle_irq_event+0x44/0x56 [25244.918695] irq_exit+0x61/0xa0 [25244.919947] do_IRQ+0x9d/0xbb [25244.921065] common_interrupt+0x85/0x85 [25244.922479] tcp_rtx_queue_tail() (called by tcp_fragment()) can call tcp_write_queue_prev() on the first packet in the queue, which will trigger the BUG in tcp_write_queue_prev(), because there is no previous packet. This happens when the retransmit queue is empty, for example in case of a zero window. Commit 8c3088f895a0 ("tcp: be more careful in tcp_fragment()") was not a simple cherry-pick of the original one from master (b617158dc096) because there is a specific TCP rtx queue only since v4.15. For more details, please see the commit message of b617158dc096 ("tcp: be more careful in tcp_fragment()"). The BUG() is hit due to the specific code added to versions older than v4.15. The comment in skb_queue_prev() (include/linux/skbuff.h:1406), just before the BUG_ON() somehow suggests to add a check before using it, what Tim did. In master, this code path causing the issue will not be taken because the implementation of tcp_rtx_queue_tail() is different: tcp_fragment() → tcp_rtx_queue_tail() → tcp_write_queue_prev() → skb_queue_prev() → BUG_ON() Fixes: 8c3088f895a0 ("tcp: be more careful in tcp_fragment()") Signed-off-by: Tim Froidcoeur Signed-off-by: Matthieu Baerts Reviewed-by: Christoph Paasch Signed-off-by: Sasha Levin

bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K

2019-08-25T08:51:50Z

[ Upstream commit fdadd04931c2d7cd294dc5b2b342863f94be53a3 ] Michael and Sandipan report: Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF JIT allocations. At compile time it defaults to PAGE_SIZE * 40000, and is adjusted again at init time if MODULES_VADDR is defined. For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with the compile-time default at boot-time, which is 0x9c400000 when using 64K page size. This overflows the signed 32-bit bpf_jit_limit value: root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit -1673527296 and can cause various unexpected failures throughout the network stack. In one case `strace dhclient eth0` reported: setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8}, 16) = -1 ENOTSUPP (Unknown error 524) and similar failures can be seen with tools like tcpdump. This doesn't always reproduce however, and I'm not sure why. The more consistent failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9 host would time out on systemd/netplan configuring a virtio-net NIC with no noticeable errors in the logs. Given this and also given that in near future some architectures like arm64 will have a custom area for BPF JIT image allocations we should get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For 4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec() so therefore add another overridable bpf_jit_alloc_exec_limit() helper function which returns the possible size of the memory area for deriving the default heuristic in bpf_jit_charge_init(). Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default JIT memory provider, and therefore in case archs implement their custom module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}. Additionally, for archs supporting large page sizes, we should change the sysctl to be handled as long to not run into sysctl restrictions in future. Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations") Reported-by: Sandipan Das Reported-by: Michael Roth Signed-off-by: Daniel Borkmann Tested-by: Michael Roth Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

asm-generic: fix -Wtype-limits compiler warnings

2019-08-25T08:51:50Z

[ Upstream commit cbedfe11347fe418621bd188d58a206beb676218 ] Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16. The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter. In file included from ./arch/powerpc/include/asm/page_64.h:107, from ./arch/powerpc/include/asm/page.h:242, from ./arch/powerpc/include/asm/mmu.h:132, from ./arch/powerpc/include/asm/lppaca.h:47, from ./arch/powerpc/include/asm/paca.h:17, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./arch/powerpc/include/asm/processor.h:39, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create': ./include/asm-generic/getorder.h:54:9: warning: comparison is always true due to limited range of data type [-Wtype-limits] (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ ^ drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion of macro 'get_order' adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; ^~~~~~~~~ Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off. [akpm@linux-foundation.org: remove __get_order() altogether] [cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39c7ce ("bitops: Optimise get_order()") Signed-off-by: Qian Cai Reviewed-by: Nathan Chancellor Cc: David S. Miller Cc: Arnd Bergmann Cc: David Howells Cc: Jakub Jelinek Cc: Nick Desaulniers Cc: Bill Wendling Cc: James Y Knight Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

netfilter: ctnetlink: don't use conntrack/expect object addresses as id

2019-08-25T08:51:42Z

commit 3c79107631db1f7fd32cf3f7368e4672004a3010 upstream. else, we leak the addresses to userspace via ctnetlink events and dumps. Compute an ID on demand based on the immutable parts of nf_conn struct. Another advantage compared to using an address is that there is no immediate re-use of the same ID in case the conntrack entry is freed and reallocated again immediately. Fixes: 3583240249ef ("[NETFILTER]: nf_conntrack_expect: kill unique ID") Fixes: 7f85f914721f ("[NETFILTER]: nf_conntrack: kill unique ID") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

inet: switch IP ID generator to siphash

2019-08-25T08:51:42Z

commit df453700e8d81b1bdafdf684365ee2b9431fb702 upstream. According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by: Eric Dumazet Reported-by: Amit Klein Reported-by: Benny Pinkas Signed-off-by: David S. Miller [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

siphash: implement HalfSipHash1-3 for hash tables

2019-08-25T08:51:42Z

commit 1ae2324f732c9c4e2fa4ebd885fa1001b70d52e1 upstream. HalfSipHash, or hsiphash, is a shortened version of SipHash, which generates 32-bit outputs using a weaker 64-bit key. It has *much* lower security margins, and shouldn't be used for anything too sensitive, but it could be used as a hashtable key function replacement, if the output is never exposed, and if the security requirement is not too high. The goal is to make this something that performance-critical jhash users would be willing to use. On 64-bit machines, HalfSipHash1-3 is slower than SipHash1-3, so we alias SipHash1-3 to HalfSipHash1-3 on those systems. 64-bit x86_64: [ 0.509409] test_siphash: SipHash2-4 cycles: 4049181 [ 0.510650] test_siphash: SipHash1-3 cycles: 2512884 [ 0.512205] test_siphash: HalfSipHash1-3 cycles: 3429920 [ 0.512904] test_siphash: JenkinsHash cycles: 978267 So, we map hsiphash() -> SipHash1-3 32-bit x86: [ 0.509868] test_siphash: SipHash2-4 cycles: 14812892 [ 0.513601] test_siphash: SipHash1-3 cycles: 9510710 [ 0.515263] test_siphash: HalfSipHash1-3 cycles: 3856157 [ 0.515952] test_siphash: JenkinsHash cycles: 1148567 So, we map hsiphash() -> HalfSipHash1-3 hsiphash() is roughly 3 times slower than jhash(), but comes with a considerable security improvement. Signed-off-by: Jason A. Donenfeld Reviewed-by: Jean-Philippe Aumasson Signed-off-by: David S. Miller [bwh: Backported to 4.9 to avoid regression for WireGuard with only half the siphash API present] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman